I first installed 2012, then I realized that my class will be using 2011. I downloaded 2011, and kept my 2012, and it didn't seem like there would be any issues. So I open my 2011 and it keeps crashing before it loads completely. There are no error messages or anything ...2012 works just fine. I tried doing a repair, and a reinstall.
View 2 RepliesIs it possible to assign a bunch of 'Lisp' programs to a template, so when I open autocad with my normal template, I also have the 'Lisp' options?If not, is it possible to load a single 'Lisp' program to load all the rest?
View 3 Replies View RelatedI am creating seed files for contractors and clients to use. I have created the object data table(s) in AutoCAD Maps beforehand to be able to view/edit in AutoCAD Civil/Civil 3D 2010.
Is there a setting that automatically attaches this data to any object (line, circle, block, etc) drawn in a sheet. I am hoping to skip the step of manually entering "adeattachdata" and then selecting the objects that the object data is to appear. I realize that each sheet would only have one object data table.
I've been having a problem with my AutoCAD LT 2010 completely deleting files after I have saved them and closed them. There is no file in the recovery manager, no back up file, nothing. It has happened three times without warning and it always happens to files I've been working on for awhile and have opened and closed multiple times. Is there any way to recover these files and how do I keep it from happening again?
View 1 Replies View RelatedI loaded a linetype (.lin file) in ACAD 2010 and it came out wrong. I would like to permanently remove it from ACAD(where it cant be seen when you go to load another type of line), how do you do that?
View 7 Replies View RelatedI cannot find the Standard Scale list anywhere in my 2010 version of AutoCAD. Only the Annotative Scale list is visible and usable. Note: it's not that certain scale values are missing, it's that the entire Standard Scale function is no where to be found!
I need to be able to change the scale of a viewport, but the Standard Scale list is not included as an option in the Properties Dialog box, nor is it in any of the other suggested places where it should be. I've used the Standard Scale list many times before in previous versions of CAD and from everything I can tell 2010 should have it.
I have just upgraded to two new computers
They are identical, One computer has this error the other doesn't
My PC specs are
AMD Quad 3.2ghz, 8GB DDR3 Ram, 500GB, ATI 5770 1GB
The Error is attached
after i post this i will re-install autocad just to see if i still get the same error. AutoCad 2011
I'm having a problem with everytime i try to use the copy,move or rotate command on my autocad 2012 i ended up with a delay and if i click the mouse it freezes and then say autocad not responding then it shots down.
View 2 Replies View RelatedMy company just got new computers, I've loaded 2012 SP1 and our lisp comands on every machine. After a plot, when someone goes to save and close the drawing, AutoCAD crashes. It does not matter which plot device is used, the result is the same. This includes the plot devices included in AutoCAD. I have reinstalled autocad on one machine, no lisp commands, same result. I have already tried some of the fixes proposed in other threads, nothing has worked.
System:
Win7 64 bit
i7 930
6Gb RAM
Radeon HD 6450
We are running AutoCAD Architecture 2012 on a Windows 7......64bit workstation and AutoCAD will suddenly crash for no apparent reason. When I look in the event log it makes a reference to the AcDB18.dll
View 6 Replies View RelatedThis happens almost evertime I go to a .ipn to update changes and save. It freezes w/ no cahnce of coming back. Two other things that is troubling me about the .ipn is that sometimes it will rearange itself w/ all the parts at 0,0,0 and or won't let me ballon any parts. After closing the file and opening it again it either does the same exact thing or takes the balloons but throws the pick points of into space......
Inventor 2010 SP4
Windows 7 Pro SP1
Dell Precision T3500: Xeon W3550 @ 3.07GHz
Quadro 600
12GB ram
I am just installed AutoCAD 2010 on Windows 7 (both 64-bit). There is a problem with the Page Setup Manager. When I select any of the page setup tabs, then select "modify" or even "new", the program crashes. Same things happens when I gain access to the Page Set Up Manager through the menu. . Page Manager hasn't ever worked. Update 2 is installed. I have repaired and reinstalled, and tried all again just now. There is no error message beyond "not responding" in parentheses next to name of dialogue box. The screen grays out and stays that way. Then the screen becomes shaded with the whirling aqua ring and it's all over. Control + P and plot causes the system to crash as well.
View 9 Replies View RelatedI have a drawing that I've been working off and on now for a couple of months and is particularly large (48MB). I have finally put togther a concept in it which took me two days and when I tried to RENDER, AutoCad crashed. All is still when until I tried to reopen the drawing, AutoCad loaded the drawing until 99% and froze. I tried the .bak and that crashed AutoCad. I also tried the .bak from an hour earlier and that didn't work. Here are the steps I've taken so far:
-Opened drawing and .bak(s) in TrueView, converted to Standard, Opened the drawing in TrueView (no problems) and tried to open in AutoCad....same old issues.
-Tried inserting drawing as a block in a new drawing (crashed AutoCad)
What I can do? Everything opens fine in Trueview?? I can resort to older files but that would be difficult. Below are my computer specs.
Intel i7 980X Extreme
GeForce 460GTX SLI x 2
PC3-10700 12GB
Windows 7 64bit Pro
AutoCad 2011
Is there a way to run some code as soon as a .dll file is loaded without having to using lisp (command "Function_Name")?
View 5 Replies View RelatedWhat is the best way to autoload my dll code when AutoCAD loads?
View 2 Replies View Relatedon projects that reference acad 2013 assemblies, specifically accormgd, my pictureboxes throw an exception when loading their image:
this.pictureBox2.Image = ((System.Drawing.Image)(resources.GetObject("pictureBox2.Image")));
it says cannot find assembly accoremgd....
Don't know how the heck that involves a picture box, since all object types have full names here.
This Project is set to run as a windows application, for testing reasons. That is likely related, but I do this all the time with no issues. I can comment out the line above and no issues.
Is there some entanglement between pictureboxes and the acad assemblies?
[URL]
I have the student version of AutoCAD 2012 on an HP laptop with Windows 7 Home Premium OS. I originally installed AutoCAD in June of 2012. It worked fine for 9 or 10 months but now whenever I select File/Open, File/Save, or File/Save As, AutoCAD stops responding and the spinning blue donut appears. AutoCAD never comes back and I have to close it from Task Manager. I uninstalled AutoCAD and reinstalled it, and the process went smoothly. However I still have exactly the same problem with the File operations. I apply Windows updates, but other than that have not made any changes to the software on the laptop. AutoCAD works fine for everything except the File operations. I am able to save with CTL/S and am able to open AutoCAD files from File Manager.
View 3 Replies View RelatedWhen I click the Force command in the LOADS panel when doing a Frame Analysis, I don't get a dialog box. All I get is a select origin box with an arrow. There is no way to change the Magnitude value or the Angle of Plane as per instructions in the tutorial. I have tried numerous ways to get a dialog box to appear, but I can't find out how. why I am not getting a Dialog box?
View 1 Replies View RelatedI understand that in a normal part to apply a load to a face is to make it a UDL (uniformly distributed load) by default. To apply a point load, I was told to create a small sketch and use it to split a face to create, in effect, a small face on which to apply a load, effectively making it a point load.
Now in the frame analysis environment, there is clearly an option for 'force' and one for 'continuous force' which the description clearly describes as a uniformly distributed load. However, when I run the simulation (on a 2m long 100mm x 50mm x 4mm Rectangular hollow beam) with a normal load in the middle of the beam (1m offset); the maximum moment comes out at 500000 Nmm or 500 Nm. By my reckoning the moment should be 1000 Nm as the basic formula for a moment from a point load is M = F*D (Moment = Force * Distance). However, to get 500 Nm, it looks like Inventor is using M = (F*x^2)/2 where x is the midspan of the beam (in this case 1m). .is a normal load in frame analysis the same as a UDL? If so..how to I make it a point load?
There are also some errors stating instability of type 2 at various nodes, I've used both Pinned and Floating constraints at either end of the beam.
In my drawing, I inserted a raster image file. I converted it into a block so I can modify it and I scaled it like this:
img_before.jpg
I saved my drawing and I close AutoCAD, but when I open AutoCAD again the image shown on the drawing file is not the same image that I had inserted previously.
img_after.jpg
The image shown is one that I had inserted before the first one but I had erased it from the file because I had to crop it in photoshop to reinsert it again.
I used the purge command to purge the block, I used the image command and i detached the image.
But the image says "unreferenced" when I do the "image command" even though it has the right location and folder. I don't know what to do anymore.
I was running a simulation with success including gravity and applied loads. I was checking both stresses and deflections. Both were in line with what I was expecting. The next day I went to change a few dimensions and run it again. The stresses and deflections were significantly less than expected (I did not tweak the dimensions very much). I changed my dimensions, remeshed and ran it again. It worked fine and returned expected results. I continued in this manner tweaking the size of my box.
Finally I went for one last run.... it didn't work again. It returned the significantly less than expected results. A bit of investigating revealed that it is only applying the gravity loads during the simulation. All of the applied loads are being disregarded (however, they show up in the report as if they are being applied.) If I supress the gravity my stress and deflections return 0 values. I have tried taking my loads off and reapplying them. I have tried removing the gravity load. I have remeshed. I have inputted my loads and the gravity in different orders. I cannot get my simulation to calculate using my applied loads. It was working fine.... what happened?
I am trying to create a custom palette that will load whenever Autocad loads. The code below works with one exception.
<CommandMethod("gtPalette")> _ Public Sub DoIt() If m_ps = Nothing Then Dim MYGuid As Guid = New Guid("{4AECF36F-C7E9-4C59-B72B-36A98DDA1D24}") m_ps = New Autodesk.AutoCAD.Windows.PaletteSet("gtPalette", MYGuid) myCoordPalette = New UserControl1() m_ps.Add("Coordinate List", myCoordPalette) End If m_ps.Visible = True End Sub
The problem is that my Palette title is now "gtPalette" which I do not want. However if I change
PaletteSet("gtPalette", MYGuid)
to
PaletteSet("GunTech Cogo", MYGuid)
Then what occurs is that when Acad (actually I'm using Civil 3D 2012) start it trys to execute a command called 'GunTech' and then one called "cogo'. Cogo being a valid Civil 3d Command brings up the Cogo dialog. If I then type the command gtPalette it appears in the correct location.
Currently on my development PC the first code works perfect and brings up a palette that even has the correct title of "GunTech Cogo". this info has presumable been saved with the GUID in my previous attempts to get the code to work.
When adding pressure loads to a perpendicular face inventor states that the pressure is applied uniformly to the selected face.As an example a disc of 300 mm dia(area= 70685 sq mm) with a uniform pressure load of 10MPa.
Is the 10MPa load input construed by inventor as 10MPa per square mm or 10MPa over the entire disc area.which is the correct interpretation?
I was placing final touches on paper space viewports (changing transparency settings etc), after wrapping that up, saved. Then tried to Publish. That's where things went downhill, drawing/publishing froze, forced to restart, now the drawing only loads to ~68 - 75% and hangs / freezes. Eventually, I get a message box stating that AutoCAD physical memory low, continuing will result in data loss. Task Manager claims AutoCAD is running @ ~98% (650Mb).
I can upload the drawing to AutoCAD WS and open it on my iPhone/iPad, but the 3D viewports are limited in detail.
Tried opening on a MAC and the same thing happens.
Tried clearing the Cachemax/cachemaxtotal, still nothing...
Is there an easy way to ensure the Vault ribbon/addin loads within Inventor 2011?
AutoCADM 2011 SP2
XP 32-Bit SP3
I have a drawing the loads slowly and makes Civil3d become non responsive for i while.
It seems to stop with "finding interior borders" as the action in the lower left corner it has some datashortcuts and xrefs on to a network drive.
How to find what is the causing the slow down?
I will start by removing all the xrefs and datashortcuts and see if it works?
I think I have read about slow load times with network drives recently but can not find the post again.
I'm trying to make an autolisp that "flips" a third party variable. No luck, command line won't recognize after it loads. I've made similar variable flips that work ??
(defun c:wp (/ wp)
(setq wp (getvar "kti_archt_wallpoche"))
(if (= kti_archt_wallpoche 0)(setvar "kti_archt_wallpoche" 1)
(if (= kti_archt_wallpoche 1)(setvar "kti_archt_wallpoche" 0)
Photoshop Extended CS3 Master Suite update: 10.0.1.
Photoshop loads then as you either start new or load an image it crashes, Laptop is an HP6320 dual processor 4gbit ram XP prof service pack 2
Photoshop :: Get error messages when it loads. What's the problem?
View 2 Replies View RelatedI'm seeking a way to "Save for Web" so the website i'm working on will load faster than it does now.
Does any one know which options I should mess with to save it so it loads faster?
i run Gimp 2.8 on Windows 7 and when i try to open Gimp the startup loads halfway and then stops responding when it gets to 'fonts'.
View 1 Replies View Related