AutoCAD .NET :: Best Way To Auto-load DLL Code When It Loads?
Aug 10, 2011What is the best way to autoload my dll code when AutoCAD loads?
View 2 Replies
ADVERTISEMENT
AutoCAD .NET :: Create A Custom Palette That Will Load Whenever Program Loads
Feb 12, 2013I am trying to create a custom palette that will load whenever Autocad loads. The code below works with one exception.
<CommandMethod("gtPalette")> _ Public Sub DoIt() If m_ps = Nothing Then Dim MYGuid As Guid = New Guid("{4AECF36F-C7E9-4C59-B72B-36A98DDA1D24}") m_ps = New Autodesk.AutoCAD.Windows.PaletteSet("gtPalette", MYGuid) myCoordPalette = New UserControl1() m_ps.Add("Coordinate List", myCoordPalette) End If m_ps.Visible = True End Sub
The problem is that my Palette title is now "gtPalette" which I do not want. However if I change
PaletteSet("gtPalette", MYGuid)
to
PaletteSet("GunTech Cogo", MYGuid)
Then what occurs is that when Acad (actually I'm using Civil 3D 2012) start it trys to execute a command called 'GunTech' and then one called "cogo'. Cogo being a valid Civil 3d Command brings up the Cogo dialog. If I then type the command gtPalette it appears in the correct location.
Currently on my development PC the first code works perfect and brings up a palette that even has the correct title of "GunTech Cogo". this info has presumable been saved with the GUID in my previous attempts to get the code to work.
Paint Shop Pro :: Workspace Auto-loads Unwanted Image
Jun 7, 2013I can open PSP X4 and edit and process images as desired. My workspace opens to Edit, as I've located that menu selection. I do not have any saved workspace configurations/files. Based on what I've read in the few hundred messages so far, I'd like to avoid a full reset of the program defaults, but if that's the only option, so it goes.
What is happening is that in as-yet undetermined situations, I get an automatic load of an old image. I've been able to recognize that the image that happens to load is the first one in the tray on the Manage tab. I don't use the Manage tab at all and only ventured over there as part of the preliminary diagnostic process to posting this message. Once I discovered that, I renamed the image in the tray and the sequence repeated with the next image in the tray, which repositioned itself to the first location.
I can "force" an auto-load in the edit window simply by starting with an empty edit window, clicking on the Manage tab and then back to the edit window. The first image in the tray magically appears. This magic also happens when I've closed another image that's been loaded. Of course, now that I'm posting this, I can't make it happen other than in the manner described above.
I'd like to have it so when I close the image in the edit window that I'm left with a blank edit window on a consistent basis. If I can determine how the image auto-loads in a manner different than described above, I'll add it here.
AutoCAD Inventor :: Code To Load IVB Files
Jun 30, 2013Is there a line of code I can add to my default.ivb file which will load another MYFILE.ivb file ?
View 1 Replies View RelatedPhotoshop :: Dreamweaver: Turn Off Auto Code Formatting
Dec 26, 2006I'm using Dreamweaver MX. Anyone know how to turn this off?
View 7 Replies View RelatedPhotoshop :: Bridge CS3 Doesn't Auto Load With PS CS3
Sep 7, 2008Before migrating to a new computer, when I clicked to open PS CS3, Bridge would automatically open (as I had programmed in the preferences). Now I am getting an error message that the beta is no longer available. I payed for the upgrade to PS CS3 extended. I can click on the Bridge icon in the system tray and Bridge opens just fine. I have uninstalled all previous versions of PS. I deactivated the old PS on the older computer and re-activated it on the new computer. I can't find out where I need to go to get rid of the error.
View 1 Replies View RelatedGIMP :: Auto-load To Desktop On Boot-up?
Aug 20, 2011How do you get Gimp to auto-load to the desktop on boot-up, in "Fedora-14", and in XP..?
Why does Gimp's resizing a pix always eventually fail intermittently in Fedora-14..?
I resize all my pix edits to 11-inches, to fit the screen properly.. After Gimp has resized about seven pix, on the next one, I delete the numbers after the decimal after the "11", and hit OK, but the numbers I deleted after the decimal all come back..
I must return to "Printsize", delete the whole height number, and key-in "11" for it to save the number of my choice..
How do I configure Gimp so it will resize pix without this glitch?..
Does Gimp bulk resize a collection of images?..
How do you make a HUGE Gimp-brush for color-painting extremely large areas?..
Can the user customize the default brushes?..
Is there a solid brush that the user can use to configure the angles the planes of the brush touches edits..? Would be sweet if one could touch the cursor to a spot on the brush, and twist it to the optimum position for the task, like how Fedora's color wheel changes its desktop background screen colors...
Will Gimp bulk resize a thousand pix edits to one height size..?
AutoCAD .NET :: Run Function As Soon As DLL Loads?
Mar 29, 2012Is there a way to run some code as soon as a .dll file is loaded without having to using lisp (command "Function_Name")?
View 5 Replies View RelatedPhotoshop :: Auto Smart Fix, Auto Levels, Auto...
May 18, 2009I have photoshop cs4 and I cannot find the Auto smart fix, auto levels, and auto contrast nor the adjustment for each that I had with photoshop elements.
View 10 Replies View RelatedAutoCAD 2010 :: Keeps Crashing Before It Loads Completely
Jan 23, 2012I first installed 2012, then I realized that my class will be using 2011. I downloaded 2011, and kept my 2012, and it didn't seem like there would be any issues. So I open my 2011 and it keeps crashing before it loads completely. There are no error messages or anything ...2012 works just fine. I tried doing a repair, and a reinstall.
View 2 Replies View RelatedAutoCAD 2010 :: Lisp Automatically Loads On New DWG?
Mar 12, 2012Is it possible to assign a bunch of 'Lisp' programs to a template, so when I open autocad with my normal template, I also have the 'Lisp' options?If not, is it possible to load a single 'Lisp' program to load all the rest?
View 3 Replies View RelatedAutoCAD .NET :: Odd Error When Picturebox Loads Its Image
Oct 24, 2013on projects that reference acad 2013 assemblies, specifically accormgd, my pictureboxes throw an exception when loading their image:
this.pictureBox2.Image = ((System.Drawing.Image)(resources.GetObject("pictureBox2.Image")));
it says cannot find assembly accoremgd....
Don't know how the heck that involves a picture box, since all object types have full names here.
This Project is set to run as a windows application, for testing reasons. That is likely related, but I do this all the time with no issues. I can comment out the line above and no issues.
Is there some entanglement between pictureboxes and the acad assemblies?
[URL]
AutoCAD 2010 :: Load Statement In Profile To Automatically Load / Unload Cuix?
Jun 4, 2013Is it possible to use a load statement in a profile to automatically load/unload a cuix?
View 7 Replies View RelatedAutoCAD Inventor :: Force Command In Loads Panel
Oct 10, 2013When I click the Force command in the LOADS panel when doing a Frame Analysis, I don't get a dialog box. All I get is a select origin box with an arrow. There is no way to change the Magnitude value or the Angle of Plane as per instructions in the tutorial. I have tried numerous ways to get a dialog box to appear, but I can't find out how. why I am not getting a Dialog box?
View 1 Replies View RelatedAutoCAD Inventor :: Frame Analysis UDL And Point Loads
Oct 10, 2012I understand that in a normal part to apply a load to a face is to make it a UDL (uniformly distributed load) by default. To apply a point load, I was told to create a small sketch and use it to split a face to create, in effect, a small face on which to apply a load, effectively making it a point load.
Now in the frame analysis environment, there is clearly an option for 'force' and one for 'continuous force' which the description clearly describes as a uniformly distributed load. However, when I run the simulation (on a 2m long 100mm x 50mm x 4mm Rectangular hollow beam) with a normal load in the middle of the beam (1m offset); the maximum moment comes out at 500000 Nmm or 500 Nm. By my reckoning the moment should be 1000 Nm as the basic formula for a moment from a point load is M = F*D (Moment = Force * Distance). However, to get 500 Nm, it looks like Inventor is using M = (F*x^2)/2 where x is the midspan of the beam (in this case 1m). .is a normal load in frame analysis the same as a UDL? If so..how to I make it a point load?
There are also some errors stating instability of type 2 at various nodes, I've used both Pinned and Floating constraints at either end of the beam.
AutoCAD 2010 :: Object Data Loads Automatically?
Jan 9, 2014I am creating seed files for contractors and clients to use. I have created the object data table(s) in AutoCAD Maps beforehand to be able to view/edit in AutoCAD Civil/Civil 3D 2010.
Is there a setting that automatically attaches this data to any object (line, circle, block, etc) drawn in a sheet. I am hoping to skip the step of manually entering "adeattachdata" and then selecting the objects that the object data is to appear. I realize that each sheet would only have one object data table.
AutoCad :: Loads Image That Doesn't Exist Anymore?
Oct 7, 2013In my drawing, I inserted a raster image file. I converted it into a block so I can modify it and I scaled it like this:
img_before.jpg
I saved my drawing and I close AutoCAD, but when I open AutoCAD again the image shown on the drawing file is not the same image that I had inserted previously.
img_after.jpg
The image shown is one that I had inserted before the first one but I had erased it from the file because I had to crop it in photoshop to reinsert it again.
I used the purge command to purge the block, I used the image command and i detached the image.
But the image says "unreferenced" when I do the "image command" even though it has the right location and folder. I don't know what to do anymore.
AutoCAD Inventor :: Simulation Missing Applied Loads
Oct 11, 2011I was running a simulation with success including gravity and applied loads. I was checking both stresses and deflections. Both were in line with what I was expecting. The next day I went to change a few dimensions and run it again. The stresses and deflections were significantly less than expected (I did not tweak the dimensions very much). I changed my dimensions, remeshed and ran it again. It worked fine and returned expected results. I continued in this manner tweaking the size of my box.
Finally I went for one last run.... it didn't work again. It returned the significantly less than expected results. A bit of investigating revealed that it is only applying the gravity loads during the simulation. All of the applied loads are being disregarded (however, they show up in the report as if they are being applied.) If I supress the gravity my stress and deflections return 0 values. I have tried taking my loads off and reapplying them. I have tried removing the gravity load. I have remeshed. I have inputted my loads and the gravity in different orders. I cannot get my simulation to calculate using my applied loads. It was working fine.... what happened?
AutoCAD Inventor :: Adding Pressure Loads To A Perpendicular Face
Nov 2, 2012When adding pressure loads to a perpendicular face inventor states that the pressure is applied uniformly to the selected face.As an example a disc of 300 mm dia(area= 70685 sq mm) with a uniform pressure load of 10MPa.
Is the 10MPa load input construed by inventor as 10MPa per square mm or 10MPa over the entire disc area.which is the correct interpretation?
AutoCAD 2013 :: DWG Loads To 75% Then Hangs - Causes Message / Memory Low / Loss Of Work
Feb 8, 2013I was placing final touches on paper space viewports (changing transparency settings etc), after wrapping that up, saved. Then tried to Publish. That's where things went downhill, drawing/publishing froze, forced to restart, now the drawing only loads to ~68 - 75% and hangs / freezes. Eventually, I get a message box stating that AutoCAD physical memory low, continuing will result in data loss. Task Manager claims AutoCAD is running @ ~98% (650Mb).
I can upload the drawing to AutoCAD WS and open it on my iPhone/iPad, but the 3D viewports are limited in detail.
Tried opening on a MAC and the same thing happens.
Tried clearing the Cachemax/cachemaxtotal, still nothing...
AutoCAD Inventor :: Ensure Vault Ribbon / Addin Loads Within 2011?
Aug 13, 2013Is there an easy way to ensure the Vault ribbon/addin loads within Inventor 2011?
AutoCADM 2011 SP2
XP 32-Bit SP3
AutoCAD Civil 3D :: Drawing Loads Slowly Stalls On Finding Interior Borders
Jan 9, 2012I have a drawing the loads slowly and makes Civil3d become non responsive for i while.
It seems to stop with "finding interior borders" as the action in the lower left corner it has some datashortcuts and xrefs on to a network drive.
How to find what is the causing the slow down?
I will start by removing all the xrefs and datashortcuts and see if it works?
I think I have read about slow load times with network drives recently but can not find the post again.
AutoCAD Visual LISP / AutoLISP :: Flip Variable / Command Line Won't Recognize After It Loads
Nov 14, 2012I'm trying to make an autolisp that "flips" a third party variable. No luck, command line won't recognize after it loads. I've made similar variable flips that work ??
(defun c:wp (/ wp)
(setq wp (getvar "kti_archt_wallpoche"))
(if (= kti_archt_wallpoche 0)(setvar "kti_archt_wallpoche" 1)
(if (= kti_archt_wallpoche 1)(setvar "kti_archt_wallpoche" 0)
Photoshop :: Loads Then Crashes
Apr 9, 2008Photoshop Extended CS3 Master Suite update: 10.0.1.
Photoshop loads then as you either start new or load an image it crashes, Laptop is an HP6320 dual processor 4gbit ram XP prof service pack 2
Photoshop :: Get Error Messages When It Loads?
Oct 17, 2012Photoshop :: Get error messages when it loads. What's the problem?
View 2 Replies View RelatedPhotoshop :: Saving So It Loads Faster
Sep 11, 2005I'm seeking a way to "Save for Web" so the website i'm working on will load faster than it does now.
Does any one know which options I should mess with to save it so it loads faster?
GIMP :: 2.8 Startup Loads Halfway
Aug 20, 2012i run Gimp 2.8 on Windows 7 and when i try to open Gimp the startup loads halfway and then stops responding when it gets to 'fonts'.
View 1 Replies View RelatedPhotoshop :: Use Of Auto Color And Auto Levels - Get Shadow / Highlight?
Jul 8, 2013I was using these tool on a lot of images, because they often seemed to vastly improve them, making the colors pop on otherwise somewhat dull ones, and getting rid of unwanted color casts..
Later though I noticed that it is often at the cost of burning out hightlights in some areas beyond salvation.I also find shadow /highlight sometimes does this also.
Then I tried to protect some small areas with a mask before proceeding, but it seems that I can't find information on just painting a mask, but only videos with much more complex adjustment such as the Russel Crow or Lynda ones with maintaing hair detail while superimposing images, which is way beyond what I need in these cases.
If I try the wand to select and inverse I get unnatural looking divisions. Is it a matter of feathering to the right extent?
Lightroom :: How The Auto Tone Auto Adjusted The Exposure Slider
Apr 25, 2012Yes, I'm probably the only person on the planet that wants this, but I liked how the Auto Tone auto adjusted the Exposure slider (ONLY!) and left all the other sliders at zero in the Lightroom 4 beta.
Is there a way to write a preset that returns that behavior?
Photoshop :: CS3 Closes After Splash Screen Loads?
Sep 10, 2012I am using Photoshop CS3 on a PowerPC Mac running OS X 10.4.11. Some days ago, I attempted to run photoshop by clicking the icon on the dock.The splash screen loads fine but immediately as the splash screen loads photoshop closes automatically. I have already tried the following:
1. Rename TWAIN file by adding the ~ in front of it
2. Deleting photoshop preferences by using Command+Shift+Option .
Revit :: Room Tag To Calculate Occupant Loads?
May 28, 2009I want to use a room tag to calculate my occupants based on the area of the room divided by the occupant load factor. The room area would be pulled from the room, the occupant load factor (OLF) would be manually input by the user. Once the OLF was input a formula would take over and give the number of occupants. Is this possible? I know it can be done in a schedule but I would like to put it into a tag for a code study. Eventually this tag could be expanded to provide other information such as required exit width from the room.
View 9 Replies View Related
