AutoCAD .NET :: Get Type Of Solid3D Object And Its Parameters?
Feb 27, 2013Is there a way to get the type of the Solid3d object and its parameters?
E.g. Type = Box, Height = 100, Width = 200, Length = 100 (Or something like that)
ADVERTISEMENT
AutoCAD .NET :: Convert A Wall To Solid3D Object
Nov 24, 2013how I can change an AEC Wall (AEC_WALL) to an Solid3D Object. I found out that I can extract all Bodies from a Wall with "GetComponentBodies" function, but I do not know how to get this to an Solid3D Object.
Dim wall AsWall = TryCast(trans.GetObject(obj, OpenMode.ForRead), Wall)
Dim bodyColl As New BodyCollection
wall.GetComponentBodies(bodyColl,True, False, True, True, True, True, True)
I know that there is an Autodesk Architectur Command "AECCONVERTTO3DSOLIDS" --> dies is the Command what i need --> but i need the command for .NET.
AutoCAD 2013 :: Skew / Shear Solid3D Object?
Nov 27, 2012Is there a way to Skew/Shear a Solid3d object using .NET? I've created a Frustum using Solid3d, but I'm unable to skew it. The easiest way would to just create a skew matrix, but it seems that non-uniform scaling is not allowed by the API.
View 1 Replies View RelatedRevit :: Adding Parameters To Type Properties
Jun 11, 2012I am trying to add LEED parameters to a floor type in the Type Properties. That can be seen when I create a schedule? I am unsure if this is possible but it is something we would like to incorporate in our models.
View 1 Replies View RelatedRevit :: Shared Parameters - Editing / Changing Type?
Dec 7, 2011I have no problem adding a shared parameter, but if I assign it the wrong type and it appears impossible to change it without adding a new parameter under a different name. I then deleted the old one, but Revit doesn't like that. They appear difficult to purge or delete without a hiccup relating to the original label the parameter was assigned to.
Example: I made a parameter for my clients occupied area (Footprint) and used the integer type by mistake. Apparently integers are only supposed to go up to 999. It refused to recognize the "Digital Grouping" so I had to convert over to the Area type.
If I try to change the type the field is grayed out.
AutoCAD Architecture :: Object Properties Missing Some Parameters
Aug 22, 2013How can I restore my object properties dialog box in its default state? I'm recently working on a project when my Autocad Architecture 2013 just stopped working while it was saving. When i re-opened the file, I just noticed that the object properties doesn't show the full parameters of a certain object anymore. The width,height and other parameters in adding a wall is not included in the properties dialog box. Same scenario goes for all the objects, when i click on a dimension line or any line, an incomplete dialog box appears. Solutions that i've tried but nothing worked:
1. Changed User Profle Preferences
2. Changed my .CUIX in the customization file
3. Restart Autocad
4. Reset Autocad
5. Reinstalled Autocad
6. Downloaded and Installed Autocad Architecture 2013 service packs 1&2
I'm Using Autocad Architecture 2013 64 bit and OS windows 8 64 bit.
AutoCAD Inventor :: Part Parameters In GeneralNote Object
Mar 28, 2013In the recent past I've been putting textboxes (General Notes) on drawings, and using part-parameters in these textboxes to display the values stored in these parameters (see attached picture). Is there a way to automatically put a link to these parameters into the notes through the API / VBA so that these values update when the part changes? With the property obj_GeneralNote.Text it's only possible to add plain text.
Product Design Suite 2014
Inventor 2014, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)
AutoCAD .NET :: Create New Object Type
Sep 18, 2012How can we define new object type in c#.net?
View 2 Replies View RelatedAutoCAD .NET :: How To Find Object Type
Apr 25, 2012I'm quite new to .NET in AutoCAD, in an Acad plug-in, I need to get the list of standards associated to the current drawing
So far, I've got:
Dim nod As DBDictionary = tr.GetObject(db.NamedObjectsDictionaryId, OpenMode.ForRead)Dim id As ObjectId = nod.Item("AcStStandard")
I do get the object ID of the AcstStandard dictinary. So far so good, but then ???
Can't seem to find an object type to do the tr.GetObject(id, OpenMode.ForRead)
There's stuff for layouts etc... but not for standards.
AutoCad 2D :: How To Delete Specific Object Type
Nov 9, 2013I have a big complicated mesh surface and under every mesh edge there is a line (I have imported it from another software). Now I want to delete lines but I cant select them one by one because it take too long.
View 4 Replies View RelatedAutoCad :: Snap Point Type Of Object?
Sep 7, 2011Using AutoCAD from another drafting program and trying to determine if AutoCAD has a feature I have become used to. The program I am using is Vectorworks and they have these items called loci. They are basically just snap points that do not print and are not actually geometry. They are great though for aligning items and referencing points. Is there a similar item in autocad?
View 1 Replies View RelatedCorelDRAW X6 :: Unable To Export Object Style Parameters To PDF?
May 18, 2013When using object styles to define font parameters, CorelDRAW doesn't adhere to the object styles' properties:
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
AutoCAD .NET :: Bluebeam And Unable To Cast Object Of Type
Oct 31, 2007i have a vb.net dll in network drive,everything is OK except on one machine which installed bluebeam, error msg as below:
Unable to cast object of type 'Bluebeam.Interop.acad16.AcadDocumentClass' to type 'Autodesk.AutoCAD.Interop.IAcadDocument'.
in my code,nothing is related to Bluebeam.
CorelDRAW X6 :: Changing Multiple Object Parameters (Size Of All Circles)
Aug 22, 2013Any way to change the size of the circles that I made so that they all enlarge yet keep their respected positions. So for the example below, I would like to just enlarge the circles and not the rest. If I select all the circles and drag them to enlarge, they lose their position. Is there a way to do this? This script [URL] ...... doesn't work for x6 but I think it is what I might need, correct?
View 4 Replies View RelatedAutoCAD .NET :: Iterate All Entity In Block And Display Type Of Object
Aug 12, 2013I would like to iterate all entity in Block and display the type of the object. For example: LINE, BLOCK REFERENCE, LWPOLYLINE, TEXT . . . .
I currently have:
For Each Ent as ObjectId In CurrBTR Debug.pring (Ent . . . .)Next
AutoCAD VB :: Access To User Parameters In Parameters Manager?
Aug 3, 2011How can you access user-defined parameters/function defined in the Parameters Manager dialog?
View 1 Replies View RelatedAutoCad :: Linking Constraint Parameters To Action Parameters?
Sep 21, 2011Im wondering if its possible to link either a constraint dimension to an action parameter or vice versa. Or using a linear parameter's value in an user parameter formula.
Its a 2D cylinder, for winding purposes we just have a rectangle, with a distance from the Y axis for radial.
Parametric dimensions: B=thickness, C=Lenght, R=radius
User parameter: A=Diameter (R*2), Mass in kg ((((pi*(c*b))*(A+B))*1.25)/1000)/1000
For the BOM, i need A, B, C & mass
For drawing references for peoples on the floor, to distinquish a cylinder from a stick, we put lines at the top and bottom of the cylinder, 1mm distance inbetween them.
I figured that making a linear parameter + stretch on the thickness to replace the B parametric dimension, allowed me to make an array of that line, with increments of 1mm as i stretch the cylinder. The thing is that the mass formula cant take the value of action parameters....
Other alternative is to keep the B parametric dimension, and add a linear parameter as above for the array. But then i have 2 places to adjust, and from a test i made, if i change the R dimension, the linear one does not follow. Its very frustrating.
What i was hoping autocad would be able to do is distance1 for array to be same as B dimension, but it does not allow me to do that, unless im missing something.
AutoCAD Visual LISP / AutoLISP :: Bad Argument Type / VLA-object Collection
Aug 6, 2013I discovered yesterday my burst lisp routine isn't working. It gives the following error message:
bad argument type: VLA-object collection: #<VLA-OBJECT 0971e1d4>
The routine does not appear to have changed. But here is the
(Defun C:BURST (/ item bitset bump att-text lastent burst-one burst BCNT BLAYER BCOLOR ELAST BLTYPE ETYPE PSFLAG ENAME ) ;----------------------------------------------------- ; Item from association list ;----------------------------------------------------- (Defun ITEM (N E) (CDR (Assoc N E))) ;----------------------------------------------------- ; Error Handler ;----------------------------------------------------- (acet-error-init (list (list "cmdecho" 0 "highlight" 1 ) T ;flag. True means use undo for error clean up. );list );acet-error-init ;----------------------------------------------------- ; BIT SET ;----------------------------------------------------- (Defun BITSET (A B) (= (Boole 1 A B) B)) ;----------------------------------------------------- ; BUMP ;----------------------------------------------------- (Setq bcnt 0) (Defun bump (prmpt) (Princ (Nth bcnt '("
-" "
\" "
[code]....
AutoCAD 2013 :: Quick Select Only Shows Multiple Under Object Type
Jun 12, 2013Civil 3D 2013
Windows 7 x64
I've found several people that had this problem through searching, but none of the fixes worked for me. I'm unable to use the quick select feature as it does not list anything other than "multiple". I've tried different files, different selections, repaired the installation, complete reinstall, updated with SP1 and hotfix 3 to no avail. I also have Autocad 2007 with SP 1 installed, as well as Autocad Architecture 2014, if that makes a difference.
AutoCAD Visual LISP / AutoLISP :: Determine Type Of Object That User Selected?
Mar 1, 2012Is there a way to determine the type of ACAD object that the user selected? I need to retrieve the value from either a dimension or text. The info could be in either format so the lisp routine needs to determine what was selected so the correct vla-get command is used.
Once I determine what the object is I can use an if statement to retrieve the value.
;user selects the object
(setq dimobj (vlax-ename->vla-object(car(entsel))))
;If ACAD object is a dimension do this.
(setq dimvalue (vla-get-textoverride dimobj))
;If ACAD object is text do this.
(setq dimvalue (vla-get-textstring dimobj))
AutoCAD Visual LISP / AutoLISP :: Check Object Type Of All Objects In Model Space
Feb 25, 2013Without opening the drawing...
How can I iterate through and check the object type of all objects in model space? And... then delete them if they are certain types... like lines, circles, polylines, text, mtext, etc?
Illustrator :: How To Get Type-on-path To Wrap Object
Oct 1, 2012I have a created a spiral path and added type to it. This spiral circles a planet-like object. This object is not completely circular, therefore overlaps some of the spiral. I would like the type on the spiral to wrap these protrusions. And I have tried the usual way of applying a text wrap (object > text wrap > make). The type on path doesn't seem to recognize the text wrap.
View 3 Replies View RelatedCorelDRAW X6 :: Object Colour Docker - Type Pantone Number
Jun 3, 2013pantone.jpg
In the object colour docker how to I type in the Pantone number I want to use like I was able to do in X3 and X5? I cannot find anywhere I can do this now in X6. It just shows me this:
Illustrator :: Copy / Paste Type Object With Opacity Mask
Dec 11, 2012I'm using AI CS6;
I have a type object with an opacity mask created in one document. When I copy and paste this object into a new file the text is pasted without the opacity mask attributes. I can separately copy and paste the opacity mask object but then I face a tricky realignment to repeat.
AutoCad :: Quick Select Command Value To Select One Type Text Or Other Object
Oct 26, 2011In Quick Select command function, I want to use more properties value to select one type text or other object.
View 9 Replies View RelatedIllustrator :: Extract Path From Type On A Path Object?
Oct 3, 2012Once you've used a path to put type on, how do you get the path back? Everything I do to recover the path deletes it.
View 2 Replies View RelatedIllustrator :: How To Change Type Insertion Point Vs Type Tool Cursor Position
Feb 11, 2014I'm using AI CC now, but I noticed this problem in earlier versions of AI: If I want to place a one-word label on an illustration I move the type insertion cursor to a speific point on the screen image and click, but then the flashing insertion point, where the label will actually start, pops up elsewhere, usually a line or two above where the cursor was, and a pica or two to the left, forcing me to type the label, then move it into position rather than simply typing it in the right place and moving on. The problem is merely annoying, but I'd like to fix it. It's probably a matter of ignorance-I simply haven't read the right documentation, but I don't know what to call the problem. Where can I find out how to change the position of the cursor relative to the insertion point?
View 2 Replies View RelatedIllustrator :: Error Message / Can't Create Type (with Type On A Path Tool)
Apr 29, 2013I want to create text on a circle path, so drew the circle, went to the "type on a path tool" and clicked on the circle. I keep getting the message "can't create type". I have tried to use the direct selection tool to select the circle first and without the direct selection.
View 3 Replies View RelatedIllustrator :: Type Tool Doesn't Select Type By Double Clicking Or Click And Drag
Mar 18, 2013My Type Tool does not select type by double clicking or click and drag. (Windows CS 5 V15.1). This is what I have tried so far and the problem still exists.
Check preferences for "Text": "Select text-object by path only" should be off. Checked. It was off. Didn't fix it.
Check the toggle for Show/Hide Edges in the View menu. Cmd(Ctrl)-H. Checked. Edges Showing. Didn't fix it.
Trashed my Prefeerences. Didn't fix it.
Photoshop :: Type Display Is Smaller Than Actual Type Input
Dec 17, 2012The font size shown should be double the actual display 36pt, but it's showing as 18pt. Do you know why it's happening?
View 9 Replies View RelatedPhotoshop :: How To Include Sampling Of Type In 7 Type Tool
Feb 24, 2013how can i include a sampling of type in ps7 type tool? i did this in ps3
View 3 Replies View Related