When using object styles to define font parameters, CorelDRAW doesn't adhere to the object styles' properties:
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
Well, I finally migrated to CGS X5 and am completing my first product brochure.I normally send out drafts and download copies in PDF and when I do I always set the access rights to the document to the same.
I allow viewing and I allow printing but nothing else and a password is required to change this.
Is there somewhere/someway that I can set the PDF export to have these parameters and password set so that they are automatically applied when I export?
Any way to change the size of the circles that I made so that they all enlarge yet keep their respected positions. So for the example below, I would like to just enlarge the circles and not the rest. If I select all the circles and drag them to enlarge, they lose their position. Is there a way to do this? This script [URL] ...... doesn't work for x6 but I think it is what I might need, correct?
View 4 Replies View RelatedWhen I export from Corel Draw as a jpg, then put the image online, on IE it shows as a red x.
View 5 Replies View RelatedI recently have been able to export jpgs into my pictures folder from Coreldraw but now can't. I don't know where they go? I can see my cdr file in the folder but it wont show my jpg file.
View 5 Replies View RelatedI've exported in all supported vector file formats, and it seem that only SVGsupports object name (and data)... however, I can't use SVG at the moment.
Is there a way to export all objects using a macro?I need in plain ascii: layer and object names, and maybe object data.
I'm looking for a simple format, no transform matrices (as in SVG).
Something like this:
Layername: Layer 1Object type: Rectanglename: rectoutline: 1mmpos: 100.000, 100.000size: 100.000, 100.000rotation: 0.000Object type: Ellipsename: circleoutline: 1mmpos: 100.000, 100.000size: 100.000, 100.000rotation: 0.000Layername: Layer 2Object type: Curvename: Curveoutline: 1mmstart: 100.000, 100.000lineto: 200.000, 200.000bezierto: XY1, XY2, XY3, XY4end
I have recorded an action to create a transparent image on a batch of photos. Next I ran the image processor using the File/Scripts/image processor. When running the action the error message occurs no matter how many ways I attempt to modify the action. Error: The object "Style "Shape Style"" is not currently available.
I then look in the action window to check and under the steps Make Fill Layer: Style: Shape, Style 1 appears but I can't delete it. This one error message makes it impossible for me to image process a batch of photos with a watermark on them.
In Develop, I'll click on the icons for the Crop Tool or the Adjustment Brush; the dropdown for the tool will briefly appear, then disappear.
In Library, I'll click Export; the Export dropdown shows for about 1/10 second, and an Export action begins, without me having had a chance to set the export parameters.
I've had LR since the beginning, all on Macs, and this is the first time for this bizzarre behavior. LR or OS? Hardware or software? I tried restarting LR and the computer.
I have a base human CAT and have attached it to a node that is constrained to a spline. I have a 300 frame animation and have 300 set for the end of the CatMotion Range.
Under 'Stride Parameters' no matter what settings I use for 'Max Step Time' and 'Max Stride Length' I always have a 'Velocity' of .842 as it never changes. I'm trying to get a really slow walk of about one step per second.
I set my stride length of a comfortable distance so it doesn't look like the rig is taking too long of a step and then I drive my 'Max Step Time' up to try to slow things down but it doesn't change anything. I'm obviously overlooking something.
3ds Max Design (3D Studio thru Max 2014), ASUS P9X79 Motherboard,
Intel i7-3960x, Hydro H80 CPU Chiller, 32GB DDR3 Ram,
Quadro 4000 Display Adapter
I need to export to TIFF in CS5 but don't know the structure of the 'parm'. Any clues out there on where to find this information?
View 3 Replies View RelatedI want to export reference parameters to an excel table using i-Logic
I found the function GoExcel.CellValues("filename.xls", "Sheet1", "A2", "A10") = MultiValue.List("d0")
It looks like the syntax calls for the file location and name if the xls file is not open and if open is not supposed to be required.
I have entered it both ways and with and with out the target file open and with the function GoExcel.Open("pathFilename.xls","sheet1") and continue to get the error:
we couldn't find C:AbellAbell VaultWorkSpaceDEVELOPMENTAC100-0100MRLTEST Table.xls. Is it possible it was moved, renamed or deleted?
Also, I was expecting that to fill in the sheet cell's would be MultiValue.List("d0","d1","d2")
but the system give me an error that says
Error on Line 3 : Overload resolution failed because no accessible 'List' accepts this number of arguments.
See below
GoExcel.Open("C:AbellAbell VaultWorkSpaceDEVELOPMENTAC100-0100MRLTEST Table.xls", "AC-100-0101003-TEST")GoExcel.CellValues("C:AbellAbell VaultWorkSpaceDEVELOPMENTAC100-0100MRLTEST Table.xls", "AC-100-0101003-TEST", "A2", "A10") = MultiValue.List("d194_A")GoExcel.Save
When I bring in a custom content center part or extrude a part I make, I always like to type it as LENGTH=24, thereby creating a parameter called length (instead of d0 or whatever it wants to call it). I then mark it as "export" manually so it shows up in my "custom parameters" tab on my iProperties. I do stuff with that exported parameter in my drawings. Is there a way to make it automatically export?
Or another approach, if I do LENGTH=24, is there an AUTOMATIC way (iLogic, etc) to make a new custom property, also called "LENGTH" that equals the LENGTH parameter?
Is there a way to get the type of the Solid3d object and its parameters?
E.g. Type = Box, Height = 100, Width = 200, Length = 100 (Or something like that)
I have created an assembly containing several parts. I want to export several text parameters of the assembly and parts into the i properties of the corresponding idw so that I can use them in a text block.
View 4 Replies View RelatedI'm currently using Inventor 2012 and i need a macro (code): I want to know if it's possible to export all the information from the parameters list (everything, names, values, tolerances, comments...) to an excel spreadsheet or a txt file (it can be a table, or a CVS file, i just want that information!), from a part file (.ipt) or a drawing file (.dwg).
Currently, i can only export the parameters' names and values , but i can't get to the tolerance values and comments . . .
How do you select parameters for export in parts that have already been published?
I have a part that I have published. There are some parameters that Ii would like to have available to the Parts List upon creation. I don't see a way to do this after the part has been published. I have been able to select the parameters for export before publishing and they will be marked for export when the part is placed form the content Center.2010 Suite-SP4 64bit
I'm actually using inventor 2012 and microsoft visual basic 2010 express, and i need to create some code so i can access and export all the information from the parameters list (values, names, tolerances... everything!) from a part i designed.
View 3 Replies View RelatedHow can I restore my object properties dialog box in its default state? I'm recently working on a project when my Autocad Architecture 2013 just stopped working while it was saving. When i re-opened the file, I just noticed that the object properties doesn't show the full parameters of a certain object anymore. The width,height and other parameters in adding a wall is not included in the properties dialog box. Same scenario goes for all the objects, when i click on a dimension line or any line, an incomplete dialog box appears. Solutions that i've tried but nothing worked:
1. Changed User Profle Preferences
2. Changed my .CUIX in the customization file
3. Restart Autocad
4. Reset Autocad
5. Reinstalled Autocad
6. Downloaded and Installed Autocad Architecture 2013 service packs 1&2
I'm Using Autocad Architecture 2013 64 bit and OS windows 8 64 bit.
In the recent past I've been putting textboxes (General Notes) on drawings, and using part-parameters in these textboxes to display the values stored in these parameters (see attached picture). Is there a way to automatically put a link to these parameters into the notes through the API / VBA so that these values update when the part changes? With the property obj_GeneralNote.Text it's only possible to add plain text.
Product Design Suite 2014
Inventor 2014, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)
Unable to edit parameters in Corridor Section Parameter Editor
View 4 Replies View Relatedi'm work in society who make flags, and we use CVC Pantone of Coreldraw graphics X4.
Now we bought the new version (X5) and it's not the same parameters of colors.
For example :
X4
Pantone 485 CVC
C : 0 / M : 100 / Y: 91 / B : 0
X5
Pantone 485 CVC
C : 0 / M : 93 / Y : 100 / B : 1
How can i import the old parameters of X4 to X5.
For some reason I cant change the line type on the file with my drawing on, but when I open a new file, I can.
View 9 Replies View RelatedI`m working on this architecture project and copied some clean lines to the file from a landscape design project.
Somehow these text styles showed up to my file (more than 50 text styles from xrefs, because of their strange names, even though I don`t have any attachment). And it says that I cannot delete them cause I`m using it.
I`ve tried out everything I could imagine and read about it. It doesn`t work. Now this simple .dwg file is very heavy and with a lot of unwanted text styles. Even if I try to copy just the lines to start over another file, all the text styles go together.
Tried:
PURGE
AUDIT
RECOVER
WBLOCK
TXTMRG (not sure how to use it)
QTEXTMODE
Attached is one of the files that this happened to. As I`m working with a few attachments this happened to all of it. My default text style are "B3_1.5", "B3_2.0" and "B3_3.0". All the other are unwanted text styles.
I am unable to save any changes to my style & standards for Inventor lt suite 2014.
Is this meant to be as indicated by the wikihelp (Save styles to the library in the Style Library Manager), or have i got something installed wrong.
Is it possible to use a Maya scene and export it as a benchmark style file?
View 1 Replies View RelatedWill Corel6 (or later) ever be able to export to a web page directly since the HTLM export doesn't work (drops links). The Corel Web program, or what ever its name is, was a joke. Its amazing that Corel work puts its name on a program that you could not open a CorelDraw file.
My current work around is to export to a JPG and then import that into dreamweaver and add the links there, then post. A pain but it works.
Cannot delete label style component. This is for line annotation labels.
I created a child BRG-ONLY from a BRG-DIST and it will not allow me to delete the distance component. The red X is faded and not clickable.
This is my second day with a new company, and when somebody else created a similar child style apparently they could not either. The just made the distance component invisible... which I guess works almost as well.
How would I be able to pick a specific component to make sure I can delete it?
Windows 7-64
8GB RAM
AutoCAD Civil 3D 2013
I recently completed a new parts list style - which I thought would be nice to use in some other idw's. So I exported it and saved it as "XXX BBB". Its original name was "XXX AAA".
When I go into another idw and import it I get it coming in as "XXX AAA" - even though I'm importing "XXX BBB".
Inventor Professional 2014.
Windows 7 64 bit.
I customized a surface style to show relative elevations, with lighter tones representing higher elevations, and darker tones representing lower elevations. With a single glance, I know the high and low spots in my project area.
C3d provides several default surface elevation styles. None of them comes close to providing the instant, data-at-a-glance information that my customized style does, which I use to design stormwater systems. Again, it's really useful to see, with one look, where the high and low spots are in my project area.
I can't figure out how to export, transfer, copy, whatever, my customized style from one drawing to a new drawing. If I want to see my customized style, I have to recreate it from scratch in each and every drawing where I want to use it.
How to transfer a surface style from one drawing to another? By the way, I tried opening up both drawings, with both toolspace/settings windows open. Tried dragging and dropping the customized style to the new drawing. Didn't work.
I could not find Round Perforated Plate style / appearance on Autodesk Inventor 2013. Maybe it called "Perforated Metal 01 style" on previous Autodek Inventor version.
I just found Oblong Perforated Plate as attached.
I can not create a new pipe section. İn inventor 2013, at the tube and pipe style
I watched these steps . still not
[URL].......
[URL]........
[URL]........