CorelDRAW X6 :: Export Object Names In ASCII File?
Jun 7, 2013
I've exported in all supported vector file formats, and it seem that only SVGsupports object name (and data)... however, I can't use SVG at the moment.
Is there a way to export all objects using a macro?I need in plain ascii: layer and object names, and maybe object data.
I'm looking for a simple format, no transform matrices (as in SVG).
Something like this:
Layername: Layer 1Object type: Rectanglename: rectoutline: 1mmpos: 100.000, 100.000size: 100.000, 100.000rotation: 0.000Object type: Ellipsename: circleoutline: 1mmpos: 100.000, 100.000size: 100.000, 100.000rotation: 0.000Layername: Layer 2Object type: Curvename: Curveoutline: 1mmstart: 100.000, 100.000lineto: 200.000, 200.000bezierto: XY1, XY2, XY3, XY4end
View 1 Replies
ADVERTISEMENT
May 13, 2012
I have a simple text file in a formX,YX,Y and so on..
What would be the easiest way to convert that into a curve?A curve with node positions as in the text file, connected with straight lines..
View 2 Replies
View Related
Jul 24, 2013
I need to export 3dpolylines from C3D 2013 to an ERSI SHP file.
Using the mapexport command I’m able to do this, however, the lines in the shp file don’t retain the layer name and colours that are in the C3D file.
Do I need assign ‘object data’ (or something similar) to the 3D polylines before exporting the shp file.
View 3 Replies
View Related
Nov 22, 2013
I have a hard drive published service configured in Publishing Manager that creates JPGs of any images that are placed into that published service. For the most part all the settings I specify on that service are adhered to when I "publish now". However one setting appears to be ignored and that is File Naming | Rename To:.
In the configuration of that option in Publishing Manager I have the rename to option set to "Filename - Sequence". When this option is set the example text it states at the bottom of file naming displays what I expect it be on output. However, when I "publish now" the file exports but with the original file name of the photo. Let me explain further. Typically when I've fully processed the photo I use the Lightroom file rename option to rename the file from the orginal import name to something more descriptive.
This seems to work fine with both the information in LR and the actual file name being correctly displayed. Even when I select the file for publishing the example file name show matches the new name after rename. However, the actual file generated always as the original imported file name. This happens for all files.
I'm using LR 5.2 on Windows 8.1.
View 17 Replies
View Related
Dec 18, 2011
I accidentally included a file rename when I just imported a batch of several hundred pictures. I violated a rule that I teach my own Lightroom students, and that is to look carefully at the import panel choices before proceeding.
How can I correct this so that the files are named as they originally were? I know how to easily fix the filenames in Windows (using a tool called BulkRename, for example), but then I'd have to "find" each image one-by-one and correctly point to the renamed version. I tried selecting all the images and then using F2 to rename, but none of the templates allow deleting a portion of the filename.
P.S. Here is an example of what I mean:
ON CARD:
IMG_0001.NEF
...
IMG_0300.NEF
WHAT I RENAMED TO ACCIDENTALLY:
IMG_0001 {shot by John Doe}.NEF
...
IMG_0300 {shot by John Doe}.NEF
View 10 Replies
View Related
Jan 2, 2013
Using Civil 3D 2012 x64
I have an SDF file which contains point objects with associated data table records. I'm trying to extract the data to xls file /or text file/
Once imported in Map there's the option to view data table, then one can go select all and copy/paste everything in excel. This would have been perfect if coordinates were exported too. Alas I end up with a rather useless table.
Is there a way to convert an SDF file to xls file and preserve all the data records along with the geometry /xyz/ in the process?
View 4 Replies
View Related
Oct 17, 2011
I'm relatively new to AutCAD map 3d but I've used arcGIS a while back.
I have existing roads, towns etc data that are already set to UTM 17. I want to import ascii point coordinates (from a comma delimited file) into the file. I can import the ascii coordinates as points fine (easting and northing), however the points come in as the absolute coordinates rather than geometric coordinates. I already set the files for right geographic projections. Beyond manually inputing the coordinates into the coordinate tracker, is there a way to import the coordinates form the file set for the geometric coordinates?
View 2 Replies
View Related
Jun 7, 2013
I have a .crd file which i need to convert to ASC1II file to then import into civil 3d to build a ground model.
I have used the survey link: [URL] ...
However when i click convert i get an error saying points not found, please see attached.
How i can go about importing the .crd file?
View 8 Replies
View Related
May 3, 2012
How can i import ASCII GRID file in autocad civil 3d. I use autocad civil 3d 2012.
View 6 Replies
View Related
Nov 22, 2011
I have a .PTS file (an ASCII file with XYZ coordinate data + two additional sets of info per point). Is there any way to bring this into AutoCAD natively?
View 7 Replies
View Related
Nov 4, 2013
I'm having problems importing points into Civil 3D 2012.I'm trying to import an ASCII file into the drawing.Files formats are P,N,E,Z,D in ASCII file and the same format is selected when I try importing.
The ASCII file has well over a 1000 points but when I import the points only the first twenty or so points import to the drawing.This seems not to be limited to this drawing.I tried to import points to a different drawing and the same thing happened.
Up to this point I have not had trouble importing points into other various drawings.Is there a button or setting that may have changed that is preventing full importation of the points?
View 5 Replies
View Related
Dec 5, 2012
i received a ascii file of position and elevation points (PNEZD) and do not see any where to import these points into AutoCAD 2011.
I know there exists survey products from autodesk, but still kind of wondering why there is no easy way to import points in the basic CAD program.
How to import a PNEZD file into AutoCAD 2011?
View 9 Replies
View Related
May 18, 2013
When using object styles to define font parameters, CorelDRAW doesn't adhere to the object styles' properties:
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
View 11 Replies
View Related
Sep 11, 2012
After finally getting X6 to be stable and usable I have two things I'd like to mention..
First, I've been using a 3rd party file manager called Ztree for years and one of its most wonderful capabilities is to copy paths to the clipboard which alleviates opening/saving frustrations with the typical Windoze Explorer dialogs. Anyway, one of the first problems I noticed with X6 is that Paste no longer works in the Open Drawing dialog, while it worked just fine in X5 and as far as I can remember, all previous versions. I sure would like to get that back.
My second complaint is the File/Export routine and specifically the presets. I do a lot of exporting to PNG and JPG and use multiple presets for fixed size/print resolution image output in both file formats. During the typical export session, I essentially export multiple different drawings all of which are exactly the same size/resolution in CD and in the past (X4 and prior as I recall,) was able to just hit <Enter> when the Export dialog appeared once the preset was set to the one I needed for that session.
In X6 though (and to some degree in X5,) even though the correct preset is listed, CD doesn't appear to recognize it, i.e., the math for the size/dpi conversion doesn't take place which forces me to waste time selecting "Original" or some other preset first, waiting for CD to render the new version, and THEN selecting the conversion preset that was pre-selected when I first opened the export dialog.
View 14 Replies
View Related
Aug 12, 2013
I am battling is bringing in LiDAR files from ArcGIS. I have tried TXT and ASC, and they both seem to only maintain the elevation to the nearest foot, as you can see in the attached image.
What is strange, is that when the file is brought back into GIS, this issue is a problem. Is there a setting for reducing the amount of units when importing data? The text file as I shared has data to the thousandth.
View 4 Replies
View Related
Feb 8, 2012
I have a lot of AutoCAD files which have embedded OLE objects (excel) inside. I want to be able to export only the text from the Excel OLE object using VBA (or Lisp, I don't mind which) without having to fire up the OLE application (i.e. Excel).
The embedded OLE objects have no link to any external files - so I imagine it must all be held somehow inside the AutoCAD file, but how it can be accessed?!!?
View 2 Replies
View Related
Dec 27, 2013
I am trying to export the following .dwg file to .stl format but the object that has been externally referenced does not make into the .stl file.
here are the files...
complete turret.dwgkinect model.dwg
View 1 Replies
View Related
Jun 28, 2012
MEP 2013
Can you export an OLE object from a DWG back to an Excel file/document?
View 1 Replies
View Related
Mar 8, 2013
I am trying to export my corel draw x6 file as a dxf or dwg file to import into sketchup. When I do this it drastically alters the lines in my drawing. It did not do this in x4. I know that it changes my curves into a bunch of line segments and I am okay with that. What I have a problem with is that it is changing my straight lines into line segments that are not straight. Any way to successfully import my corel drawing into sketchup?
View 2 Replies
View Related
Mar 8, 2013
Both printing and exporting is disabled, but only with one file, others are fine. How to fix it? No, it's not the trial version.
View 5 Replies
View Related
Apr 18, 2013
AutoCAD 2013. I have multiple drawings with 100's of tabs inside, I would like to either export or print out all of the tab names.
View 9 Replies
View Related
May 19, 2011
I want to export the layers names to Excel, as I used in VBA. I'm using AutoCAD 2011 (64b), VB Express 2010, Office 2003 (32b). I ran this routine in XP 64b and W7 64 with the same problem.
No problem in building the DLL, or loading it to AutoCAD. When running the command, Excel opens, but no workbook is created and I get this Unhandled exception error:
System.Runtime.InteropServices.COMException (0x80028018): Old format or invalid type library. (Exception from HRESULT: 0x80028018 (TYPE_E_INVDATAREAD))
at Microsoft.Office.Interop.Excel.Workbooks.Add(Object Template)
at Ligacao_Excel.Class1.Proj1() in d:documents and settingsjoão santosvisual studio 2010ProjectsLigacao-ExcelLigacao-ExcelClass1.vb:line 22
Line 22 is : folhaExcel = objExcel.ActiveSheet
To program in VBA was much easier, but I recognize the .NET power, as soon as this can be dominated
Imports Autodesk.AutoCAD.ApplicationServices
Imports Autodesk.AutoCAD.DatabaseServices
Imports Autodesk.AutoCAD.EditorInput
Imports Autodesk.AutoCAD.Runtime
[Code]....
View 3 Replies
View Related
Jun 1, 2012
I've got some PDF's that I'd like to convert to a DXF or DWG. Is it as simple as Import>>>PDF then Export>>>DXF? or are there other hoops I'd need to jump through.
View 3 Replies
View Related
Dec 7, 2013
Now i have a blank file/document every time i export to .ai format... i use only CorelDRAW X6 (64bit) with update 16.4.0.1280
I know it when my client complaint, the ai file i give is Blank ? just a blank on that file.i have check my last other file on ai format, the ai file is fine, not a blank like now.i was try to uninstall and install again CorelDRAW, but it didn't work yet.
And i format my windows 7, install again CorelDRAW, but still like that. What should i do to make a normal export to .ai again ?????
View 4 Replies
View Related
Nov 5, 2011
is there a way to export multiple files in coreldraw? I have a bunch of images in one coreldraw file. They are all in groups. I want to export each image to separate files.
View 3 Replies
View Related
May 2, 2013
I have just upgraded to X6 from X5.
When I export a PDF the dialog window no longer opens and offers me the choices for crop marks, bleeds and so on!
This all use to work fine in X5.
How can I get this to start working properly again.
View 14 Replies
View Related
Jan 23, 2012
When I navigate to the Export function in CorelDraw there are suddenly no more choices which are provided in the the pull-down export file type list.
View 1 Replies
View Related
Jul 18, 2013
I'm just trying to put together a macro that will automate saving a selected group of objects to an AI file, however, I need it to be Compatible with version 8.
I've followed code from older posts to the forum and have successfully exported out a PNG file... I'm hoping to just alter that... here is what I have so far:
Set filter = ActiveDocument.ExportBitmap(path & filename, cdrAI, r, cdrPalettedImage, w, h, 96, 96, cdrNormalAntiAliasing, False, False, True, False, cdrCompressionNone)
With filter
.Finish
End With
What would I change to allow it to be compability with AI 8?
View 2 Replies
View Related
Jun 27, 2011
Any way to get object names to display in the viewport. Currently we just make a text label and lock it in place after we name the object but if there's a way to just display the object name instead of making a separate label.
It's nothing that's absolutely earth shattering, but streamlining the process is always a good thing.
View 4 Replies
View Related
Sep 11, 2011
Is there a way to export certain objects from a file with multiple objects?
View 3 Replies
View Related
Mar 26, 2012
A friend sent me the file with this object that I couldn't figure out what it is.I was wondering a transparency, but there is no "type" in it.Or maybe a lens, but still I could not recreate it.
Have a look to the file in: [URL].......
View 9 Replies
View Related
