I've got some PDF's that I'd like to convert to a DXF or DWG. Is it as simple as Import>>>PDF then Export>>>DXF? or are there other hoops I'd need to jump through.
View 3 RepliesDespite the LR folder being connected to the right folder on my Drobo which contains all the photos
I am importing photos from an Aperture export (NEF file with XML side car). The folder contained 400 photos. 200 imported correctly and 200 were blank! I deleted the blank photos with a view to reimporting them. I also deleted the folder in LR and on my Drobo to ensure the photos would not be considered duplicates. I then reimported the photos the same way I have done the others only to end up with blanks once again but this time with question marks in the top right corner.
I received an EPS file of 183MB in size, and I would like to convert it into JPEG for viewing, but Coreldraw crashes during the import, bringing up the ARM. I can open it with Illustrator, but couldn't export it, getting insufficient memory message no matter how small the output JPEG size and resolution is.
I've had same issue with importing EPS file into X5 in the past, but usually will be successful after a few tries. But this time it simply crashes every single time.
My partner passed me a .PAT file she'd used as a background in her graphics. When I tried to use Fill Tool>Pattern Fill and load the file, it gave me the following error:
"Either '(file path).pat' is not importable using the selected filter, or this format in not supported"
I know that Corel supports .pat, but what would be the correct filter?
I have a pdf file I want to edit in the coreldraw. I have imported the file successfully after that when I select text it selecting only one character instead of selecting word. How to edit the words in the imported files.
I tried to import text -> Text
and Import text-> as Curves
But I am not able to edit the words in the file .
When I try to import a file it freezes up. It doesn't even give me an option to select type of file. It pulls up the screen where you would be able to but freezes and will not let me do anything. I use Windows XP.
View 3 Replies View RelatedI am new to Corel Draw and am slowly teaching myself. I created a drawing in Corel Draw and then exported it to DXF. I then opened them in a CAD application to actually cut the image out in a water jet. The size of the drawing was not modified, only the corners were fillet (because I could not figure it out in Corel Draw at that time). When I imported it back into COrel Draw to fill it with my image, the size of the drawing was about a 1/2 " bigger (width and height) than it was when I exported it. This is the only place where the size is different.
View 6 Replies View RelatedWhen I try to import a pdf file that I have scanned with my printer, corel X6 says either "file is corrupt" or something about not enough memory to perform the action. I have 2 different work stations with 2 separate printers (both the same brand and model) and have tried scanning and importing and get the same message from both now.
It always worked before. I can open the pdf document in Adobe and it is fine, so I don't think the file is corrupt, rather it is something in corel that is stopping it from importing. There are no updates outstanding for my computer.
After finally getting X6 to be stable and usable I have two things I'd like to mention..
First, I've been using a 3rd party file manager called Ztree for years and one of its most wonderful capabilities is to copy paths to the clipboard which alleviates opening/saving frustrations with the typical Windoze Explorer dialogs. Anyway, one of the first problems I noticed with X6 is that Paste no longer works in the Open Drawing dialog, while it worked just fine in X5 and as far as I can remember, all previous versions. I sure would like to get that back.
My second complaint is the File/Export routine and specifically the presets. I do a lot of exporting to PNG and JPG and use multiple presets for fixed size/print resolution image output in both file formats. During the typical export session, I essentially export multiple different drawings all of which are exactly the same size/resolution in CD and in the past (X4 and prior as I recall,) was able to just hit <Enter> when the Export dialog appeared once the preset was set to the one I needed for that session.
In X6 though (and to some degree in X5,) even though the correct preset is listed, CD doesn't appear to recognize it, i.e., the math for the size/dpi conversion doesn't take place which forces me to waste time selecting "Original" or some other preset first, waiting for CD to render the new version, and THEN selecting the conversion preset that was pre-selected when I first opened the export dialog.
I have been trying to import a 28 page pdf file into corel and instead of it separating it is staying on one page.
Is there a setting a need to change so it separates each page,
I'm trying to import a powerpoint 2007 file in X4, but coreldraw says that it doesn't support pptx format. the pdf of the powerpoint created is not upto the mark. my file contains flowcharts. I tried using the office pdf maker [the microsoft one] and doPDF 7 to create pdfs which were of bad quality. I want to import the shapes as vector which ain't happening
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
I have an eps file that fades in color when imported to Corel Draw X4. Could there be something missing in the Adobe Illustrator eps file that causes this or is it a problem with Corel?
I'm using Corel Draw X4 with the SmartDesigner X4 add-on package. Also, I recently added a sublimation printer to the mix. But, it doesn't seem to matter which printer I send the image to, the colors are faded in Corel draw even before I attempt to print.
logo.png
I receive a logo from customer in AI format.
The logo has a gradient / fountain fill (vector).
When I import the AI file into CorelDRAW, the part with gradient / fountain fill becomes a bitmap.
How can I keep it as vector when importing?
I try to save the AI as PDF but it still becomes a bitmap in the PDF.
I am trying to export my corel draw x6 file as a dxf or dwg file to import into sketchup. When I do this it drastically alters the lines in my drawing. It did not do this in x4. I know that it changes my curves into a bunch of line segments and I am okay with that. What I have a problem with is that it is changing my straight lines into line segments that are not straight. Any way to successfully import my corel drawing into sketchup?
View 2 Replies View RelatedBoth printing and exporting is disabled, but only with one file, others are fine. How to fix it? No, it's not the trial version.
View 5 Replies View RelatedNow i have a blank file/document every time i export to .ai format... i use only CorelDRAW X6 (64bit) with update 16.4.0.1280
I know it when my client complaint, the ai file i give is Blank ? just a blank on that file.i have check my last other file on ai format, the ai file is fine, not a blank like now.i was try to uninstall and install again CorelDRAW, but it didn't work yet.
And i format my windows 7, install again CorelDRAW, but still like that. What should i do to make a normal export to .ai again ?????
is there a way to export multiple files in coreldraw? I have a bunch of images in one coreldraw file. They are all in groups. I want to export each image to separate files.
View 3 Replies View RelatedI have just upgraded to X6 from X5.
When I export a PDF the dialog window no longer opens and offers me the choices for crop marks, bleeds and so on!
This all use to work fine in X5.
How can I get this to start working properly again.
When I navigate to the Export function in CorelDraw there are suddenly no more choices which are provided in the the pull-down export file type list.
View 1 Replies View RelatedI'm just trying to put together a macro that will automate saving a selected group of objects to an AI file, however, I need it to be Compatible with version 8.
I've followed code from older posts to the forum and have successfully exported out a PNG file... I'm hoping to just alter that... here is what I have so far:
Set filter = ActiveDocument.ExportBitmap(path & filename, cdrAI, r, cdrPalettedImage, w, h, 96, 96, cdrNormalAntiAliasing, False, False, True, False, cdrCompressionNone)
With filter
.Finish
End With
What would I change to allow it to be compability with AI 8?
Export each page (maximum object boundary not page boundary) as JPEG to my given path with unique file name. (file name will provided on each page as filename).
See Image Here...
[URL]..........
Uploaded with ImageShack.us
I need to export pages (ie set as default ie pg3 - pg8) as .eps file. we would like to have the page name included as a suffix of the file name i.e. customer_name_2XL.eps
file name is customer name & 2XL is page name.
I have upgraded to X5 from X3 , and now when i Export EPS files, they are MASSIVE, I work in a company that does signs, and car vinyls and other graphics /vector related work, and It is important that i use EPS as file format for out " plotter" but a size of 800 mb and 2,2 GB now when it used to be 10 mb is insane.
I also use POSTSCRIPT 2, as 3, makes the file over 2 GBs.
I've exported in all supported vector file formats, and it seem that only SVGsupports object name (and data)... however, I can't use SVG at the moment.
Is there a way to export all objects using a macro?I need in plain ascii: layer and object names, and maybe object data.
I'm looking for a simple format, no transform matrices (as in SVG).
Something like this:
Layername: Layer 1Object type: Rectanglename: rectoutline: 1mmpos: 100.000, 100.000size: 100.000, 100.000rotation: 0.000Object type: Ellipsename: circleoutline: 1mmpos: 100.000, 100.000size: 100.000, 100.000rotation: 0.000Layername: Layer 2Object type: Curvename: Curveoutline: 1mmstart: 100.000, 100.000lineto: 200.000, 200.000bezierto: XY1, XY2, XY3, XY4end
When I export a logo file to EPS it doesn't get the same size a the cdr-document. For example my document is 250 mm x 120 mm with a black background but when I open the EPS version of it in Photoshop the document is 330 mm x 120 mm with a 250 mm black background and the rest is transparent.
View 4 Replies View RelatedI try to export an illustration to eps with bounding box. When I import this e.g. with ghostscript, I get an error output like this:
GPL Ghostscript 9.05 (2012-02-08)Copyright (C) 2010 Artifex Software, Inc. All rights reserved.This software comes with NO WARRANTY: see the file PUBLIC for details.Displaying DSC file C:/Users/thomas/Documents/Konferenzen/ROSE2012/Grafiken/square.epsDisplaying page 1Error: /undefined in 1,00Operand stack:Execution stack: %interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval.
[code]....
The problem seems to be at line "1,00 setflat".
I am using CSG X4 (SP2+hotfix) on a Win7 (32Bit) machine. I tried the following to figure out the problem:- varying export settings- using different programs to import (Ghostscript, Acrobat, CorelDraw)- trying complete re-install of CGS X4- changing the computer using the same version of CGS It seems that the eps export interferes with some system settings or installed printer drivers, but I am not able to isolate the problem. I would expect that the export filter is self-contained.
I tried to reproduce the problem with minimal content. The difference between the produced eps files may isolate the problem. A simple cdr-file, the produced eps-files and a snapshot of the used settings are in the zip-file located at URL....I assume that the eps files are built up from different resources but I cannot locate the involved files.
I prepared my drawing for size A0 (841 mm / 1189 mm) but when exporting it in Jpg or Tiff format for printing, it happens something very strange. In the dialogue window it doesn't allow a bigger size than A1 (594 mm / 841 mm). It shows me 74 % for width and height parameters. I try to change it to 100 % but it turns back to 74. Now I cannot print it because I need the bigger size.
View 9 Replies View Relateda tip for solving the problem of exporting an image as a tif led to another question. One solution to export as tif was to create a macro. See that solution post here: [URL] .......
It says : Step 1Run the built in macro. (Tools > Macros > Run Macro). In CorelDRAW versions prior to X4 (Tools > Visual Basic > Play). Select ‘File Converter’ macro from the ‘Macros in’ list and click ‘Run’
However in my macros drop down there are no macros. how can I get a file converter macro?
I chose to add the ico file format to my options for export in Photo-Paint, but when I go to export, it is not in the drop-down menu. What I need to do?
View 3 Replies View RelatedI have created a Marketing presentation in corelDRAW now I want to export it in MS Word format with as it is look and feel and editable text.
View 2 Replies View RelatedWe have saved a custom Color Management setup and I would like to know if there is a way to export the file so that it can be loaded on different PC's. We also have a custom Publish to PDF setting that we would like to do the same thing with.
View 1 Replies View Related