I am new to Corel Draw and am slowly teaching myself. I created a drawing in Corel Draw and then exported it to DXF. I then opened them in a CAD application to actually cut the image out in a water jet. The size of the drawing was not modified, only the corners were fillet (because I could not figure it out in Corel Draw at that time). When I imported it back into COrel Draw to fill it with my image, the size of the drawing was about a 1/2 " bigger (width and height) than it was when I exported it. This is the only place where the size is different.
I'm trying to import a powerpoint 2007 file in X4, but coreldraw says that it doesn't support pptx format. the pdf of the powerpoint created is not upto the mark. my file contains flowcharts. I tried using the office pdf maker [the microsoft one] and doPDF 7 to create pdfs which were of bad quality. I want to import the shapes as vector which ain't happening
I have an eps file that fades in color when imported to Corel Draw X4. Could there be something missing in the Adobe Illustrator eps file that causes this or is it a problem with Corel?
I'm using Corel Draw X4 with the SmartDesigner X4 add-on package. Also, I recently added a sublimation printer to the mix. But, it doesn't seem to matter which printer I send the image to, the colors are faded in Corel draw even before I attempt to print.
I am currently working with gnuplot and some graphical output I want to postprocess in corel. I get a correct .eps file however when I want to import those files I get some font problem. For example: my degree symbol ° gets somewhat confused with another letter é. Same goes for some symbols like the greek theta. In gnuplot I use that /Symbol t for theta and its also correct in the output. However if it goes to corel it gets confused with these symbols and imports the curves wrong.
I occasionally have customers bring in .ai file for me to open in x4. I am unable to do so. I have read about opening in Adobe reader and exporting as PDF. I have no other software to open this. I have tried importing selecting files of type .ai .
Just installed coreldraw 12 on new pc. but when i import any jpg picture coreldraw shuts down. I can open an old file and work on it ok but still shuts down when I import or paste any jpg.
I'm having 2 seperate import problems in Coreldraw X5 in Windows 7. The first one, and the one I need to fix immediatly is, every time I try to import a dfx file, the program crashes. The other which is less important right now is, a lot of times when I try to import PDF's I get an error message that says the file is corrupt.
I'm having size problems after importing and changing files. Look at this print screen, how this 2.73 mb Photo sizes up to more than 15 Mb without me doing anything?
I used to work with X3 but after updating to X5, this problem turned up.
I'm having trouble importing RAW (.CR2) files taken with my Canon T1i into PhotoPaint X4. I am able to do it successfully with my NikonD90, but when I import from the Canon, the image is all purple and black. I just downloaded and installed the latest Canon RAW codec.
When I import a pdf file the program tries to interpret the special characters as some control function. the script over write for a few characters after a dash.Do I need to have the originator save in a different format or do I have to select a special font to convert it to?
I am facing problems with the use of Photo-Paint within the CorelDraw Graphics Suite X5 on Windows 7 Enterprise x64 SP1 machines.The application crashes when the students try to import a picture twice. The error I am getting is 0xc0000005. I already searched on Google and on this forum, and came across a lot of people with the same problem, and that it's being caused by Avast. Thing is, we do NOT use Avast, we are using NOD32 as anti virus.
Last week I opened some .eps files into coreldraw 12 without any hitch. But two days later I am unable to open or import any of the eps files. I am unable to find out what is the problem. The files I opened and worked on earlier are now opening as static bmp files or they are just opening as a grey square with adobe illustrator written on it. I tried selected both (eps) and (ps, prn, eps ) from the file type while importing. Also I kept the sort type at default. But still it keeps giving me the invalid file type error.
The problem is when i import a pdf file in coreldraw.
Mode cymk change all colors in RGB and i don't want this. How is possible?I need import pdf file cymk in the same mode. The pdf file is vector and cymk like source.
I frequently require mathematical symbols such as ≤ or ≥, which are easy enough to insert as unicode characters and supported by common fonts such as Arial.
However, when I try to import text containing such characters, such as within an Excel table, they just import as "?" instead. I've tried pasting Excel table in various formats. As an Excel object or a Metafile the overall formatting is retained correctly but the symbols become question marks. Enhanced Metafile preserves the symbols but alters the fonts so that the text no longer fits within the cell, ruining the layout.
I've also noticed that when I manually insert unicode symbols using the text tool in CorelDraw X6 it changes the font to Adobe Fangsong Std R (which looks awful). If I try to change the font after the fact, everything changes except the symbols. Highlighting the symbols also looks different: rounded highlight rectangle versus normal rectangle for ordinary text. It seems CorelDraw refuses to treat these symbols as ordinary unicode text forcing them instead into this horrible wirey font instead.
I also have issues try to export from CorelDraw to say Powerpoint where Corel will automatically format some text as ligatures but when exporting these just show up as "?" in Powerpoint.
1) Is there any way to get CorelDraw X6 to reliably import and export text, including unicode symbols, without messing up the formatting/layout. 2) is there any way to get CorelDraw not to change the font of symbols?
we use Corel Draw but different versions. Some of us use the X4, some X3 and some even 12 or 11. We have huge problem with the time interval past while importing even a single simple outline drawing. We usually wait from 4 - 7 minutes.
My question is what could be the problem? Different versions of Corel Draw?, bed LAN connection?, or something else?
I have some old .ppf files which are teaching Slides like a Powerpoint type thing, each file I have has 15-20 pages in and they seem to open in Corel Draw no problem and I have been able to Ungroup also no Problem. But not sure how to put each slide on a separate page (automatically if Possible if not Manually)
Then I want to re-save as a more modern File that I can open or import to Powerpoint ..
I would Imagine that does not matter that they are a .ppf files as would be the same importing any multipage doc .
I'm working on a document with the necessary combination of bitmap and vector. After importing textures 300dpi (A4/24bit/jpg) the reaction slows down the program significantly, to the inability to continue working in it. Texture takes 40mega while in memory, but in my opinion it is not quite so much, it should not materially affect the normal operation. I am using CDrawX3, I tried to open it in a version 9 or 10. The fastest I came subjectively is CDraw Designer v10. But he still falls.I tried adjusting the amount of RAM for Corel or lower resolution bitmap import at 150 dpi. It's practically the same. It does not even mention the interactive transparency, or weld/trim operation, etc. I think, that the X4 or X5 are the same. Every year new version seems the same old software with the polished exterior. I'm used to work in Corel for technical drawings with lot of combination of bitmaps and vectors but unfortunately it will want to look for something else?
I am getting an error "Unrecoverable Error" when I try to import a .dxf from Autodesk Inventor. I have tried saving as different versions of .dxf with the same results. I am using Version 16.2.0.998 of Corel Draw X6
I have some Ai files that I need to open in X6 but they use linked images which I have, but when opening in CorelDraw all I get is the basic Ai stuff but not the linked images, is there an easy way to open the Ai file and see it as it was intended?
As a sub note I can't go back to the supplier of the Ai file to make any changes.
I just used the help file for the first time in ages and noticed all the links to the graphics are broken hence no diagrams etc. I tried to search out where they are usually stored and it gives some weird Address under properties. It's a vba so suppose it's a database? How do I restore the links without having to do a re-install?
As to the pen: How do you stop the annoying over-the-top predictive curve that happens past the node in the next section after a long drag to form the first curve. i.e. you simply want to draw a straight line after dragging out a curved section previously and you get this unmanageable curve to deal with ?
I´m trying to extract text from a Corel file to a TXT file in another editor and then merge it back in.Extracting the text seems to be working just fine but when I´m trying to merge it back in I get the error message "Wrong file format or could not open".
After finally getting X6 to be stable and usable I have two things I'd like to mention..
First, I've been using a 3rd party file manager called Ztree for years and one of its most wonderful capabilities is to copy paths to the clipboard which alleviates opening/saving frustrations with the typical Windoze Explorer dialogs. Anyway, one of the first problems I noticed with X6 is that Paste no longer works in the Open Drawing dialog, while it worked just fine in X5 and as far as I can remember, all previous versions. I sure would like to get that back.
My second complaint is the File/Export routine and specifically the presets. I do a lot of exporting to PNG and JPG and use multiple presets for fixed size/print resolution image output in both file formats. During the typical export session, I essentially export multiple different drawings all of which are exactly the same size/resolution in CD and in the past (X4 and prior as I recall,) was able to just hit <Enter> when the Export dialog appeared once the preset was set to the one I needed for that session.
In X6 though (and to some degree in X5,) even though the correct preset is listed, CD doesn't appear to recognize it, i.e., the math for the size/dpi conversion doesn't take place which forces me to waste time selecting "Original" or some other preset first, waiting for CD to render the new version, and THEN selecting the conversion preset that was pre-selected when I first opened the export dialog.
