In Develop, I'll click on the icons for the Crop Tool or the Adjustment Brush; the dropdown for the tool will briefly appear, then disappear.
In Library, I'll click Export; the Export dropdown shows for about 1/10 second, and an Export action begins, without me having had a chance to set the export parameters.
I've had LR since the beginning, all on Macs, and this is the first time for this bizzarre behavior. LR or OS? Hardware or software? I tried restarting LR and the computer.
Well, I finally migrated to CGS X5 and am completing my first product brochure.I normally send out drafts and download copies in PDF and when I do I always set the access rights to the document to the same.
I allow viewing and I allow printing but nothing else and a password is required to change this.
Is there somewhere/someway that I can set the PDF export to have these parameters and password set so that they are automatically applied when I export?
I want to export reference parameters to an excel table using i-Logic
I found the function GoExcel.CellValues("filename.xls", "Sheet1", "A2", "A10") = MultiValue.List("d0")
It looks like the syntax calls for the file location and name if the xls file is not open and if open is not supposed to be required.
I have entered it both ways and with and with out the target file open and with the function GoExcel.Open("pathFilename.xls","sheet1") and continue to get the error:
we couldn't find C:AbellAbell VaultWorkSpaceDEVELOPMENTAC100-0100MRLTEST Table.xls. Is it possible it was moved, renamed or deleted?
Also, I was expecting that to fill in the sheet cell's would be MultiValue.List("d0","d1","d2")
but the system give me an error that says
Error on Line 3 : Overload resolution failed because no accessible 'List' accepts this number of arguments.
When I bring in a custom content center part or extrude a part I make, I always like to type it as LENGTH=24, thereby creating a parameter called length (instead of d0 or whatever it wants to call it). I then mark it as "export" manually so it shows up in my "custom parameters" tab on my iProperties. I do stuff with that exported parameter in my drawings. Is there a way to make it automatically export?
Or another approach, if I do LENGTH=24, is there an AUTOMATIC way (iLogic, etc) to make a new custom property, also called "LENGTH" that equals the LENGTH parameter?
I have created an assembly containing several parts. I want to export several text parameters of the assembly and parts into the i properties of the corresponding idw so that I can use them in a text block.
I'm currently using Inventor 2012 and i need a macro (code): I want to know if it's possible to export all the information from the parameters list (everything, names, values, tolerances, comments...) to an excel spreadsheet or a txt file (it can be a table, or a CVS file, i just want that information!), from a part file (.ipt) or a drawing file (.dwg).
Currently, i can only export the parameters' names and values , but i can't get to the tolerance values and comments . . .
How do you select parameters for export in parts that have already been published?
I have a part that I have published. There are some parameters that Ii would like to have available to the Parts List upon creation. I don't see a way to do this after the part has been published. I have been able to select the parameters for export before publishing and they will be marked for export when the part is placed form the content Center.2010 Suite-SP4 64bit
I'm actually using inventor 2012 and microsoft visual basic 2010 express, and i need to create some code so i can access and export all the information from the parameters list (values, names, tolerances... everything!) from a part i designed.
Im wondering if its possible to link either a constraint dimension to an action parameter or vice versa. Or using a linear parameter's value in an user parameter formula.
Its a 2D cylinder, for winding purposes we just have a rectangle, with a distance from the Y axis for radial.
Parametric dimensions: B=thickness, C=Lenght, R=radius User parameter: A=Diameter (R*2), Mass in kg ((((pi*(c*b))*(A+B))*1.25)/1000)/1000
For the BOM, i need A, B, C & mass
For drawing references for peoples on the floor, to distinquish a cylinder from a stick, we put lines at the top and bottom of the cylinder, 1mm distance inbetween them.
I figured that making a linear parameter + stretch on the thickness to replace the B parametric dimension, allowed me to make an array of that line, with increments of 1mm as i stretch the cylinder. The thing is that the mass formula cant take the value of action parameters....
Other alternative is to keep the B parametric dimension, and add a linear parameter as above for the array. But then i have 2 places to adjust, and from a test i made, if i change the R dimension, the linear one does not follow. Its very frustrating.
What i was hoping autocad would be able to do is distance1 for array to be same as B dimension, but it does not allow me to do that, unless im missing something.
Win 8.1 64 bit A Toshiba Satellite laptop, LR 5.3. When I try to export I get a window without export buttons at the bottom to do the export. Further if I try to resize the export window the export window disappears and LR freezes requiring to ctrl/alt/del to close it. I cannot export anything to HD or email, etc.
I was in a class last night where everyone had Macs and the buttons appeared on their versions and worked fine. Totally repeatable. I can supply screen shots.
I've created various snapshots of a series of photos and I'm ready to export. Is there a way to export all the snapshots at once, in a single export step? Up to now, I've been doing this step by step, exporting one version of the image, than going to the next snapshot and exporting again.
Is it possible to change the parameters of all the texts (photos and pages) in one time with a personnal parameter instead of doing one by one ? I don't find this functionality.
I've created a book in LR's book function: selected pics, soft-proofed and made gamut corrections, added photo and page captions, etc. I'm ready to export to PDF but every time (4+ times) I get an error message at what looks like the end of the process. I do have a file but it includes only the cover.
I've tried to send the book to Blurb but get a similar message.
I'm using an iMac running OS 10.6.8. Some of the pictures are laid out in 2 page mode--which I mention only because somewhere I read that mode creates export problems. The pictures are copies in raw (DNG) and sRGB format, and probably 15-20 MB each. I'm wondering if the pictures are too big or...
I was using a trial version of lightroom on windows xp sp 2 and now after 2 weeks it is not exporting images any more. I was willing to purchase a full retail version but does the full retail version has the same bug?
I am using Lightroom to version 4.3. The export feature stopped working. When in the library module if I choose a file(s) and click export I do not get the export dialogue box. Lightroom basically locks up until I press the escape key. Interestingly if I right click on an image, go to export and chose a preset it works? Do I need to reinstall Lightroom and If so how do I do this.
I've been using v3.6 on a windows 7 PC for about 2 years. I've recently upgraded to v5.3 on the PC and at the same time have installed v5.3 on my laptop also running windows 7. On the laptop using a few new images: the smart preview, exporting and web functions work fine. On the original PC which has my original catalog of c17K images these three functions do not work. As far as I can tell the association between the masters and the images in the library has not been lost. The library and develop functions in v5.3 are working on all the c17K images in the original catalog.I've set the Export dialogue box up using recommendations from answers I've gleaned form other discussions in the forum eg; making sure the 'do nothing' flag is active in the post processing section and reducing the quality of the JPEG image. Still when I export nothing happens.
I've been trying to export jpeg images from LR 3, and sizing them to 1110 x 525 pixels, @ 72dpi, the dimensions of my blog header. However, despite inputing these values, the exported jpeg image is sized at 793 x525. Quality is set to 85 and nothing else is checked. Am I missing something? I've also tried the "dimensions" and the "width/height" box choices, but it always outputs at the same 793 x525.
The files are from a Nikon D2h (a little old), RAW.
Lightroom fails to export to jpg most of the time. The application creates the desired subfolder, and displays a progress bar, but does not create the file.
I am trying to export some raw files to jpg and they continually won't export! I can try over and over, some will evidentually export but others won't.
I have a 66 image slideshow sorted from a collection.
LR will only export 11 images.
I have tried from the original images (not in a collection), have saved a slideshow, have previewed and played, everything works fine on screen but I can't export the slideshow as jpegs.
If I export a photo, then make edits and want to save them, should I export them again? It looks like when I export a photo a 2nd time, then I get an additional photo on my hard drive. This is not really want I'm trying to do - I'm just trying to save it as an edited copy.
I think this contributed to some of the problems I was having with getting too many photos, then discarding the "extras" - that apparently was a bad, bad thing to do, but I'm still not quite sure how to handle this.
Lion 10.7.4 MacPro - I cannot export from Lightroom 4 in my main Admin account. Lightroom gives me an error message - Spent much time with Adobe and it was suggested that it was an Apple issue. Apple tech doesn't think so.
Let me start off by saying that I am a total lightroom beginner. I am using publish to HD or sometimes simply right click and export to a JPG with a resize to 1920x1080 and it never comes out that ways. It comes out every time to 1919x1080.
I'm shooting with a Sony ALT-A65V in 16:9 mode. You can see the original, the settings I used and the resulting JPG.
Also, I notied another posting referencing something similar but is there something lightroom does to the photo by default? Even once a photo seems to be rendered in my view it seems to change slightly after a second or two.
I am working on a team of 3 photographers. And when we go to events, we syncronize our cameras in date and time so we can work easly in the editing stage. But the problem that I´ve encountered is that when I edit my photos in my lightroom and then export them, and then import them again with everyone´s pictures in the same lightroom, mine don´t mix, don´t syncronize with the times and dates of the other pictures and also, my red tags and stars don´t appear. And this is making us waste so much time, because the moments of a wedding for example, dont match and we have to order them manually...
