AutoCAD Architecture :: Model Space View Can't Be Dragged Into Sheet
Jul 9, 2012
We have had a reoccuring problem in autocad architecture 2012 where model space views can no longer be dragged into a sheet. It just shows a circular cancel icon.
The sheets are set up fine and it may even have several MSVs already in place then out of no where the ability is lost. We have tried allt he usual fixes (checked the layers, restored the .bak file, tried on other computers, installed service packs) but it seems once the file is "poisoned" the only fix is to recreate the sheet and delete the old one. Not a terrible solution but it is not efficient.
We have a dozen computers all with acad architecture 2012 and it seems to happen on random computers and we can't pinpoint any specific differences between them.
We did not have this problem with Autocad architecture 2009.
It could be something with the project database.
View 2 Replies
ADVERTISEMENT
Oct 27, 2011
We're testing some new machines running Windows 7 64-bit with both AutoCAD Architecture 2011 and 2012 64-bit installed.
When dragging and dropping a model space view onto a sheet, instead of the folder with paperclip symbol, we're getting a circle with a line through it prohibited symbol. This only occurs when our project files are on our network. When we use them on a local machine this does not occur.
We cannot drag and drop onto new sheets either.
[URL]
We are running on a Novell Linux Open Enterprise Server network. We previously had a problem with not being able to open any sheets if another drawing was open, which we resolved by disabling Novell File Caching. We are also now experiencing unhandled e06d7363h exception errors with any type of file access in the Project Navigator. This crashing also does not occur when the files are on the local machine.
View 5 Replies
View Related
Mar 22, 2013
I'm using ACA 2013.
While in a view I make a "New Model Space View". After I tag this MSV it seems that being able to see the border of each MSV that is in my view dwg would be a useful thing. Is there anyway to turn this boundary on?
View 5 Replies
View Related
May 19, 2011
is there a way to COPY objects from model space to paper space? CHSPACE only "cuts" geometry. I need the same geometry stacked in both model space and paper space.
View 1 Replies
View Related
Apr 5, 2013
Im working on a student version of Architectural CAD 2012 i drew a floor plan and used AEC Dimensions on my model space but when i switch over to work space they don't show up. I tried matching properties and switching between paper and model but so far no luck.
View 2 Replies
View Related
Feb 27, 2012
Somehow the two tabs which were located at the bottom of the screen in my version of Autocad 2008 have dissapeared. I used them extensively and would like to get them back. I've tried the solutions provided in previous answers without success. The menus which are supposed to appear don't.
View 4 Replies
View Related
Aug 24, 2012
ACAD 2010 text doesn't view the same in MSpace and PSpace! Model space is the acad default text: txt Paper Space it appears as it should as Romans. The drawings print as txt and not as it should Romans! When I change the text in model space to Romans, save the drawing, enter PSpace and the return to MSpace, it seems to 'reset' back to text!
This is specific to my workstation BTW, when I open the dwg file on a colleagues PC it opens Romans in both Model and Paper space.
View 9 Replies
View Related
Jun 29, 2013
CAD-Newbie working in paper space zoomed in close. I want to return to page extents but am zoomed in so close I can't click outside paper space to move view control toolbar to model space. is there a simple key command to perform this function?
View 9 Replies
View Related
May 14, 2013
Let’s say you have a large building plan in model space but there is only one small area of the building that the view port is looking at. Is there a way that you can draw around that viewport and then take that into model space and paste it in the same place so now you have the same area located in both views?
At the moment I need to try and work out where the view is by drawing a rectangle around the correct area of the building and this is time consuming.
I could then trim/delete everything else outside that box.
View 4 Replies
View Related
Sep 21, 2011
I have never gotten this to work, but had put little effort into it until recently. Thus far I have checked my project standards to make sure "match sheet views to view" is checked to "yes".
In both View drawing and the sheet- VISRETAIN is set to 1.
the VPLAYEROVERRIDESMODE is set to 1
I am working on drawings that are in my current project through project navigator. I am using ACA 2010 and not sure what else I need to do. I turn off all the unwanted layers in the view drawing, then create a sheet and xref in the view to model space- all the layers reset, and I again have to turn off all the unwanted layers. If I change a layer color in the view drawing, it does not change in the sheet drawing upon save and refresh.
I hate wasting time repeating the same task over and over....
View 2 Replies
View Related
Aug 11, 2012
How can I get dimensions and stair well in view to show in sheet view? Basement & 1st fl are ok but 2nd floor is not.
See attached screen shot.
View 2 Replies
View Related
Mar 5, 2012
We have a bit of an urgent situation at work. Namely we have stepped over from standard AutoCAD 2010 to AutoCAD Architectural suit 2012.
The situation is as such that if we set our search path to our ctb and our dwt (nothing else no other search path changes) our dwt templates load as being visibly black/white all the colour information is wrong.
Upon closer inspection of elements draw in the dwt for example a line though it still displays as being physically black/ white the properties menu declares it as being the colour we need it to be for example red. We have double-checked in our plot dialogue box if the ctb is present and its presence is confirmed. The peculiarity is though if we try and locate it using our (findfile “CTB\NAME\AND\PATH” method the command prompt returns nil meaning as far as I have come to understand as missing/ not loaded/ not found. A line the properties menu states the plot style is set to ByColor and not by the specific CTB file as when the same line is selected in AutoCAD 2010.
We have quite an extensive customisation comprising almost of every kind of file AutoCAD has put up for user customisability so my instinct was that something within the whole customisation was causing our issue.
We have since rid of all customisations and reset the profile using AutoCAD and as double backup also via the registry keys, we also have deleted our corresponding AutoCAD application folder in the hope of eliminating some nasty that may of stayed behind.
We have no plug-ins that cannot be the problem. Further experimentation shows that if we create a search path using the following lisp the colours are displayed right for the duration of the AutoCAD session but upon restarting AutoCAD the colours again become black/ and white.
When entities such as the lines are moved the items being moved flicker across the screen in their correct colour, once placed the image instantly shows as being black/ white again.
As final symptom our model space colour seems to be the only thing effected, our layout tabs are fine however we don’t work in layouts but rather in model space.
I have also as last used the vars2src command in AutoCAD 2010 and imported the variable settings into AutoCAD architectural suit 2012 hoping that the issue was a variable setting overlooked, to no avail though. Neither is our desktop icon enabled with any switches such as profiles.
View 1 Replies
View Related
Apr 7, 2012
a Villa Drawing I want give a Bath room Detail, so i want off this villa drawing with out bath room. if i have any modification in this bath room automatically changed the bath room detail drawing in model space not for layout using view port... ,if anypossible in model space, what i choose the part only shown ..
View 3 Replies
View Related
Mar 22, 2012
Is there an easy way to rotate my drawing 90 degrees clockwise in model space, but leave it in it's orginal view in paper space. The reason is for drawing elevations - north, south, east, west from construction lines pulled from a plan. I've tried using UCS and was able to rotate, but it won't let me copy objects after doing
View 7 Replies
View Related
Jan 21, 2014
how do i create a UCS view in model space
View 6 Replies
View Related
Aug 15, 2011
I already set up the dst file, but doing this I have just set the dwgs that will be in the sheet list tag. How to set the dwgs that goes into the sheet view and model view? I know that you can have different folders there and organize your dwg files as details, elevations etc.
View 2 Replies
View Related
Apr 8, 2013
I'm using project navigator and I want to use the intelligent title marks created by the Mode Space View drawing that is created when I use the Detail Boundary.
I have purchased a 5 hour block of support time on this and after 4 days they have not found a result for me and are looking to developers at this point.
My issue is this. I xref in the floor plan that I want to use to make some enlarged floor plan details out of. I have a custom high detail display configuration set for this view drawing. I use the detial boundary tool that adds the detail boundary and tag and then created my model space view with an intelligent titlemark that will then reflect the number and sheet when inserted into a sheet drawing.
The problem is trying to get this MSV to reflect what I see on the floor plan. As of now it just brings in a enlarged detail of the area but it's all the same color with no hatch detail.
I can change the result of what I get by selecting the “model space view” that I created and then going to properties and changing the “display controlled by” on the display tab of the properties of that object. If I change that to “Drawing default setting” then the result is set to whatever the drawing default settings are. It looks like the “default settings” for a 2D Section/Elevation object are “General” Display Representations.
how to get my custom “Bew_High Detail” display representation to be the default Display Representation of the “2D Section/Elevation” object then I think I would get my desired results.
View 1 Replies
View Related
Aug 29, 2013
We experienced a problem. we have a drawing file, is about 1.6meg not big. while working in model space doing some 3D work, all of a sudden all the objects dissapear except for some text. all layers are on and thawed. we regen all, zoom all. weird thing is when we go into the paper space tabs everything shows up. so all the data is there some place but cant find it in model space.
there are no xrefs in the drawings and i had cleaned all the multiple copies out before to keep the file size down and more workable. this is happening on two machines. other drawings are fine.
View 2 Replies
View Related
Apr 30, 2012
There was a "rotate view" command in the old Eagle point software. How to do that in Civil 3D?
View 3 Replies
View Related
Jul 1, 2010
Trying to finish someone else's half finished project done in acad 2007. I'm working in Architecture 2009. I just opened a sheet template, xreffed the file into a viewport, and whenever I switch from model to paper space or back I get this message-
Cannot find the resource string number 25900 in resource AecXDisplayPropsData50-
View 6 Replies
View Related
Aug 8, 2012
How can I remove a view from a sheet the only option seems to be rename and renumber in version 2012?
View 3 Replies
View Related
Jan 5, 2012
When I go to model space I am unable to adjust the view scale. Although I can get to the prompt for a new scale value, the program will not accept my changes. Is this locked somehow?
View 6 Replies
View Related
Oct 24, 2012
I am having an issue with my template that I created from an old drawing: the quick view layout thumbnail still shows the old drawing in model space. All of the paper space thumbnails update themselves as I work, however model space does not. It shows the old drawing both when I hover over the model space tab, and also when I pull up all of my quick view layouts. I am using AutoCAD 2009
View 4 Replies
View Related
Mar 28, 2012
how can i rotate a drawing view in model space and paper space? UCS -> new -> 3 point -> and saving the view works, but trying to figure out how to do this with paper space now. My purpose if for pulling construction lines from plans, for elevations. In the past I simply rotated the drawing, but if i had a layer turned off it would mess up their positioning.
View 1 Replies
View Related
Mar 13, 2013
First off, here is what i want to do:
- in model space
- 3 model space view ports (ai_tiledvp 3 "_V")
- different layer state visible in each view port OR different saved view visible in each view port.
I cannot for the life of me figure it out. At the moment, every time i change the layer state (or saved view) in one view port, it changes in all 3 view ports so that they all show the exact same thing.
View 2 Replies
View Related
Jan 8, 2014
I got a 3D model from a building but somehow it is not solid, you can "see trough the walls" (as in image attached). I want to create a plan view for each floor and a side view from this 3d model.
View 1 Replies
View Related
Sep 15, 2011
How does one accurately rotate the view so that view in paper space is parallel and perpendicular to the border sheet without guessing the angle?
View 3 Replies
View Related
Jun 11, 2013
When I create a model space view; then drag it on the sheet; shouldn't they be linked? I mean if I go into the View drawing, move the drawing in question, then update the model space view, shouldn't that update the sheet view automatically? Theoretically speaking of course; we are talking AutoCad.
View 2 Replies
View Related
Jan 23, 2013
How do i rotate objects, plans...etc on model space in a view port.
View 9 Replies
View Related
Apr 26, 2012
Just got the new 2013 version and I'm having this strange problem:
When I open a drawing (that was last saved in Paper Space) and I'm switching to Model Space, my view is not set to "Top" by default. How can I set my view by default to "Top"?
View of when I'm switching from Paper to Model Space:
"Top" View, what I'm supose to view by default...:
View 9 Replies
View Related
Jul 9, 2012
Every now and then I'll have a sheet that will not accept placement of another model view from the sheet set manager. (There are usually two or more model views already on the layout). Every attempt will cause AutoCAD to crash. I run recover and audit and the problem persists.
Today I did something differently. I added a new layout, and successfully placed the model view on that layout (I accepted the condition that the layout was not part of a sheet set). Then I went back to the layout I really wanted the model view on and was able to place it without any problem. The significant difference I can see is that I usually have only one layout (I typically delete layouts I don't use which leaves only one layout). It seems to me that having one layout and only one layout while attempting to place a model view on it could very well be the cause of this random crash problem. I have not been able to confirm this yet but the next time I crash trying to place a model view, the first thing I will try is to add a new layout.
---------------------------------------------Signature--------------------------------------------
Civil Design Professional Since 1983 (Intergraph), AutoCAD since 1989
It is said that a fool's voice is known by multitude of words... I'm just writing this stuff instead of saying it outloud... that's my loophole.
Windows 7 Professional 64-bit - Service Pack 1
Intel﴾R﴿ Core﴾TM﴿ i7-3820 CPU 3.60GHz; 16 GB DDR3 Dual Channel RAM
nVidia Quadro 4000; AutoCAD Civil 3D 2013, sp1
View 1 Replies
View Related
