I'm currently attempted to simulate a piece of clothing, however, everytime I hit the simulate button it straight up disappears without warning and it's gone until I "Reset" its state again. I don't know what to do. It's currently set up at default settings with a plane as the collision and the piece of clothing as the cloth.
View 9 RepliesI am having an issue when trying to simulate cloth. When I simulate the cloth, the dialog box with the simulation comes up and before it finishes simulating one frame it closes. At the bottom of 3ds Max, it says end solve.
It worked on an earlier version of the same file as I was able to simulate 100 frames.
I am running 3ds Max 2010 on Windows Vista.
Below is a picture of my command panel. Why the simulation box only stays open for half a second?
I am trying to cloth simulate a window blind. My problem is as follows : The model is made up of several pieces.
1. the curtain / blind
2. a hard button near the bottom
3. a cord attached to the button
4. a wooden know at the bottom of the cord
5 then finally tassled material
So i want the blind to move like cloth blowing in the wind ( fine no problem i can do that ! ) but the hard button must be hard surface and follow the mesh position of the blind - PROBLEM
Then the cord attached to the button must be cloth dynamic to flap about and then the knob on the bottom hard surface attached to this cord and then the tassels must be cloth.
The only way i can think of to do this without merging the seperate geometry is to simulate the curtain then cash this, the attach the button to a cluster on the curtain, then do the sim on the cord, then cluster attach the knob the cloth the tassels.
I can make the button profile and spin it around its axis just fine..getting the holes into such a shape is another matter..Is this beyond AI's 3D tool capability?
And to be clear, I mean the clothing type of button, with holes for thread, as opposed to an interactive button pushed by a user on a web page.
I am running Windows 7. Recently upgraded from LR 4 (which was always stable for me) to LR 5. I have the application on one drive and my catalog and previews on a separate SSD drive. Anytime I run lightroom 5, after a little while (10-15 minutes), the drive with the catelog and previews is no longer accessible or even viewable from windows explorer. I've never had this trouble with any other program and the only way I've been able to see the drive again is by restarting my computer.
View 5 Replies View RelatedEver since the latest update to PS CS6, when I add a simple effect to a text layer, like emboss, the working image disappears when I zoom in and out. Also, the layer effect does nothing to the type. It's almost like a dispay issue. When I turn the layer effect off, my image is visible again.
View 1 Replies View RelatedWhat is causing my EG Data Reference Surface to disappear on screen and Profile goes to crap? I've noticed this twice on same project in separate drawings. If I go to Toolspace and synchronize then it appears back on screen.
First dwg: I created a Pump Station Site Plan and data referenced in my surface and pipe network. I save and close then reopen and EG is gone until I synchronize.
Second dwg: I created a Railroad Crossing Exhibit showing plan and profile. I data referenced in my surface and pipe network. Same thing...save, close, reopen and I have to synchronize it to have plan and profile to appear ok.
This isn't good when I have .dsd files that I typically plot my drawing package from. I sent multiple sets of drawings to the plotter and all my Pump Station Site Plans were missing the surface contours. For this sheet, I had to synchronize and send separate plots just to have contours appear.
How could I run an add-in from an external application (VB.NET)? How could I get the id of the installed apps?
How to simulate a PerformClick on a button of an add-in or run the main-form?
I am working on an application that uses map to query data, then saves the data to a file, and repeat. It works flawlessly when I use a commandmethod with commandflags.session, But, when I try to run the same code from a form button, I get "drawing is busy". The command from the form button ignores the commandmethod and the commandflags. I am guessing that "sendstringtoexecute" would work, but I would prefer to not do it that way.
What am I missing? Is there another way to lock the session?
Here is what I am trying to do.
drawing1 is open and the user presses the button
data is queried and saved as 1.dwg
close and discard drawing1
open a new doc drawing2
data is queried and saved as 2.dwg
close and discard drawing2
open a new doc drawing3
I've been using XCLIP for years. Never had an issue.
Today I installed 2012 and found that the ability to stretch and edit XCLIP boudaries had finally been added. SWEET!....wrong.
I was working merrily along when all of a sudden my screen blinked, refreshed, or something, and 80% of the lines within my XCLIP boundaries just disappeared.
I closed the drawing and reopened. Closed ACA and reopened. Rebooted and reopened. Gone.
If I delete the XCLIP, it all comes back. Apply a new XCLIP, gone again.
Open the drawing in ACA2011, still gone. EGADS!
Is this a totally new problem???
It literally took less than an hour after installing to find a problem in ACA 2012. My Autodesk woes continue.
How to remove clothes in Photoshop cs5?
View 3 Replies View Relatedpainting / drawing clothes, or lases, how to paint some lases?
View 9 Replies View Relatedway to expand portions of clothes in a picture. For example in this picture, I want to know if it is possible to make the uniform of the girl look like a long sleeve uniform.
View 5 Replies View RelatedThis is my friend picture im having a hard time changing her clothes color to black and maybe few white stripes because i was telling her she doesnt look good on yellow but rather black i want to surprise her i could change the background myself but i could do it later
View 9 Replies View RelatedI want to change the color of a blazer (suit jacket) in a photo but I also want to change the color of the pinstripes on the blazer to colors different from each other and different from the jacket.
View 7 Replies View RelatedIn short I am Trying to assign or attach an existing 3D models Jacket to a Human Character. I have tried many tutorials on youtube but they are all about garment maker clothes not about existing 3D models clothes.
1st- I have a character model with mesh. The mesh his body including trouser (pants) and shirt. The model is biped rigged so works perfect with *.bip animation.
2nd- I have a good looking jacket. Its a original 3d model not made with garment maker.
I tried to attach the jacket as cloth but the jacket did not stay at position when I runplay bip animation, or when I move the model. It seems the jacket is not attached at all as cloth.
I placed the jacket on the character model correctly at position.Then I clicked the MODIFY button.I select in the “modifier list" “cloth”.In “object properties” of cloth I select jacket as “cloth” with presets as “wool”.Then I click “Use Panel Properties”.At add projects I select the other object. And I press “Add”Then I select “Collision Object”.I press “OK”.It seems that the jacket is not attached to the rest of the character mesh or biped.Even when I press “Simulate Local”it does not attach the jacket to the body it miss shapes the jacket.
I was wondering if photoshop or a plugin got a function, which can create a "plane" looking like pants and then fill it with the texture/pattern I want?
Something similar to vanishing point. Though in this case I got pants. So a square ain't useful.
Take a look at the pictures. I cut out the pants, make a plane looking thing, which shows the depths and folds in its area. After that I apply the texture/pattern. Is this possible with photoshop?
I hope you catch my meaning. If not I will try to describe myself better.
Im new to autoCAD 2010 and I have to make an elevation of a closet, with clothes in it.
How do I best do this? Which tools should I use and so on? Ive made the closet but don´t know how to draw the clothes in it.
I took a picture of my 3 year old daughter on the beach this past weekend, and since I didn't want to spend the money on a fancy white dress, I thought I would use an existing one, and then photoshop it to white. Well, the only dress we had with us on the trip was a pink/shite checkered dress, not a solid color. I'm having one heck of a time doing this.
I've tried both the color change, and the hue/saturation tools, and although I'm able to change the dress from pinkish to white, I am unable to get rid of the checkerboard pattern.
how to make the effect of my picture like this one attached!
I need to show a clothes hanging rack in the utility room and i want the racks to look like they're loaded with cloths. Back when I was doing this with a pen I would just draw the hangers with a heavy squiggly line, I don't know how to do this in Autocad LT.
View 9 Replies View RelatedI have some pics that the subject had paint splotches on their clothes. Is there a way to blend the surrounding color to cover the paint? Or is there any other way to remove the splotches?
View 1 Replies View RelatedWhat I have is an image of cloth, tablecloth to be precise and its all rumpled up...
What I need is to place splats (food stains) all over it, well only one or two... I don't mind if they are separate images or created directly on another layer or whatever is the best way...
The thing i'm stuck with is how to ensure they look like they're really on the cloth and take account of the light, shadow, peaks & troughs the cloth already has in its rumples.
how to texturing better velvet cloth in 3ds max,
View 6 Replies View RelatedI have a woman with her arms spread and a cloth starts follow a defined path around her and her arms.
Is there any way to do that in max?
i made a clothes hanger, and grouped / assembled the components as one object, in the cloth modifier add object menu, i can't find the hanger, but if i dissembled / ungrouped them to separated parts, it can appear back in the add object.
View 1 Replies View RelatedToday I tryed to simulate cloth that was created in 3ds max 2012.While in max 2012 it works fine, in 2014 the cloth pops a few centimeters up. No matter what i tried (reset state, erase simulation, delete the cloth modifier and re apply it) the problem persists.
Along with other problems such as geometry being corrupted (in max 2014), crashes when rendering, and wierd viewport problems, max 2014 has to be THE MOST buggy and problematic release of 3ds max I've ever used.
One long, thin plane linked at 90 degrees to a rotating cylinder to roll the plane up.Cylinder is kinematic, plane is mCloth with a single strip of verts connected to cylinder which rotates.
MassFX works. Bake all produces keyframes as a masterpoint controller on the mCloth modifier, BUT not as standard max keyframes in the planes transform controller...making it pretty unusable.Sometimes, bake all will end with an "unknown exception". After that, Max transforms are unstable - Moving an object with mouse is unpredictable until a restart.
Repeatable on both Windows XP and Windows 7 - Max 2013 32 and 64
Other features of MASSFX work eg standard rigid bodies etc - seems to relate only to clothOtherwise, any way of rolling up a cloth ribbon that is FIXED at both ends on to a cylinder, I may offer a prize!
how to realistically add a logo/text to the back of someone's shirt.
[Add the letters HV to the back of this guy's shirt]
I have two "banners" created from a plane with a cloth modifier on each. One banner is in front of the other. I want the one in front to drop first. After it drops and is waving around a little...setting down...I want the second banner to drop. Because they are close to each other and both waving a bit, they will hit each other.
How can I have both set to be a cloth object and both set to be collision objects to the other? I thought it was one or the other. (In the cloth object properties)
Max 2014 (SP2)
Win 7 64-bit; Dual Xeon E5-2687W @ 3.10 GHz; 64 GB Ram
NVIDIA GeForce GTX 570; Quadro 4000
Is there any way to do collision deform with massfx cloth like you could in reactor? Like in this tutorial: [URL].........
View 2 Replies View Related