AutoCAD Architecture :: Annotative Symbol Doesn't Appear
Sep 8, 2011
When hovering my pointer over an annotative object, the annotative symbol does not appear. This works on my other computers but not this one. Is it a setting somewhere or is it a problem with the install? I don't remember if it ever worked correctly or stopped working at some point in my learning process on ACA 2011 over the last 6 mos.
I am running Autocad arch 2011 (as Autocad 2011) and a co worker is using Autocad electrical 2012 and when he works in a drawing of mine the every annotative scale that is used in the file is attached to every annotative object. Which means I have to go through every object and delete scales that should be be there....all my annotative objects appear in every view port because every annotative object has every scale..
I'm trying to create and add a block to our standards. A user wanted to make it annotative. Our company hasn't used them much. I think I'm starting to understand them better. It is just a simple HVAC symbol with two attribute definitions. The block I received was a scaled up block for 1/8" - 1'-0". I shrunk it down to normal 1:1 size to match what is would look like on paperspace with 1/8" text. Now to make it annotative.
- Do I add scales to it or leave it as is? The users may need need most of the scale that are defined.
- How do I save scales on the block for them to use?
Is there a way to make the Breakline symbol (found in Expresstools) annotative? So it scales according to the Annotation Scale on the lower status bar, and in paperspace.
edit: I just noticed that Leaders don't work in Paperspace either. Linear Dimensions, however, do.
I know it is a simple thing but for the life of me I cannot make it work. I must of hit a button and messed it up.
Annotative dims and text. I have multiple view ports ranging from 1/8 to 1-1/2 inch scale in one paper space. I have noted items (in model) and need them to appear in the different scaled VP's. However, too much is showing up. All scales in all vp's are active, not just the scale of the vp.
When I want to establish a new annotative text style, and I'm in the Text Styles dialog box, in the "Size" box, why will it not let me enter a Paper Text Height of 3/32"??? Every time I try it defaults to either 1/16" or 1/8". I have checked the Annotative box.
Why can I not check the Annotative Scale box for the attribute? Please see attached. The circle scales up and down but I only see the text in the 1/8" scale and but not in the 3/16" scale. The 3/16" scale is selected in the attributes scale box.
There are obvious reasons to limit the number of annotative scales while your drafting. I don't know that I'm aware of what file errors/issues can come about from using annotative scales. I've read where you should clean up the scales in your drawing but I'm not sure why?
I can set up anno text to appear for instance at 1/8" scale, but cannot get it to change for every scale, and for it to remain centered on the original position at each change in scale. I know it's something to do with how I set it up but cannot find it in "Help".
I have created a block in the model tab with the annotative scale set at 1'-0" = 1'-0" with the UCS set to World. When the block is inserted in model space either on the model tab or thru viewport it displays and prints correctly. However when the same block is inserted into paperspace on a layout tab the block appears correctly but when printed either hardcopy or PDF it is rotated 90 degress around its insertion. This malfunctions the same whether it is inserted directly or nested in a legend block.
It is also not one particular block or drawing but (mal)functions across drawings and block definitions.
I really don't want to have to make two sets of blocks for the project.
I seem to be running into a wall here, I have created an annotative dimension and copied it to the tool palette. When I go to dimension something in a new dwg that does not have the new annotation style, the dimension style does not keep its annotation setting. It brings in the annotation style but not the annotation setting.
I updated my computer to windows 7 32 bit and need the file: AdskHwCertificationDatabase.xml - version 17.1.0.4 so that I can find out the correct driver for my OS and my quadrofx 1700 graphics card. Autodesk doesn't support 2008 Architecture and the on;y file I can find is buried in a torrent file with a pirated copy of 2008 and I DO NOT wish to download that.
I´m having problem with annotative multileaders. They work fine while I don't move the lead point. Once I change it, the annotative scale works just on the scale that I use to transform it. In any other scale, it returns to its original position.
Unfortunately, a new project we have does not allow us to use annotative objects, so we are back to switching scale by creating several dimstyles with a varying dimscale (eg. Dim96, for 1/8", Dim48 for 1/4" etc.) Now I have created a button on the tool palette that brings in text and it allows me to set the size of the arrow by matching it to the dimstyle, but the text comes in always at the same size - 9" which is 3/32" for a 1/8" plan. The arrow changes but the text does not. I know I have to change the CANNOSCALE, but I can't seem to figure out a way of making it work so that the user will only need to switch the dimstyle from the pull down up at the top right and then be able to use a tool palette button that will bring in a text with leader with it's arrow head and text height matching the dimstyle scale.
I'm trying to set up Annotative Text styles in my Xref base drawing, so that I can alter the Annotative Text Scale in paperspace of my titlesheet drawings.
Is it possible to create the Annotative Text styles in an xref and amend these on a titlesheet when said xref has been imported?
I've checked the "Help" section of AutoCad but it all seems to relate to creating Annotative Styles within a single drawing.
I am running ACA 2011 X64.I have some leaders that I copied from one drawing into another drawing.
When copied the leaders do not display their attributes. I cannot seem to figure out how to do it. I have made sure they are both in the same annotative scale and that both have the current scales loaded.
We've got a sketched symbol that locates to the center of holes on a part.Problem is, the symbol either doesn't recognize the hole's center and even if it does, the center of the symbol (the designated insertion point) jumps to the edge of the hole.I've even recreated the symbol and I get the same effect.
I have a co-worker who needs to create a block where the attributes scale with the anno scale, but the block container does not. He's creating a tree block and wants the canopy and trunk attributes to scale without scaling the tree symbol.
Making an attribute annotative and applying the scales to the attributes doesn't seem to work if the block itself isn't annotative.
Are we missing something, or is this just not possible?
Is there any trick that bring in an annotative block into a drawing at the annotative scale you are working in, not the scale the block was created in?
I've downloaded some new watermarks to my computer (into word) and they will display in my watermark editor in Lightroom 4. However, when I use those downloaded type styles, the copyright symbol displays in the bar below but does not display on my photo. I've also used alt0169 but it still isn't visible on my images.
I am a computer technician in a society that uses AutoCAD Architecture 2010.I'm having some problems with the software.
First problem:
On the computer of one of our users, the profile created in Autocad suddenly disappears :-(. We do not know why ... The user is obliged each time to recreate his profile, reconfigure all toolbars .Have you ever encountered this problem?
Second problem:
On another computer, from time to time the delete function of Autocad is no longer functional. We need each time between Pickfirst = 1 and that works.How to ensure that this function does not disappear?
Third problem:
On another computer, the user activates the 3D profile, he selects his palette, and when he clicks on the "more"window, autocad error appears "Error Report Autodesk,..." . Is it possible to display all palettes?
I am working with files that somebody else did, I need to bring an external reference and it dosen't show up, then I check on the ref command and seems like the external reference of that file is there, I check also on the layers and they are not off or frezze, what could be the problem?
Before I save a drawing in AutoCAD Architecture, I hit ZOOM EXTENTS so the thumbnail preview is accurate and so it comes up the same way the next time it's opened. Unfortunately, after doing a ZOOM EXTENTS, SAVE & CLOSE, upon re-opening the drawing, the view shifts downward, which usually covers up the title of the drawing.
If a window is tagged and the window is moved, then the tag moves also. Is it possible to keep the link to the property set information but make it so the tag does not move if the window is moved?
OLE objects does not plot in color. The OLE object is in a title block that its being reference to the working drawing. Is the are referencing setting we can manipulate to resolve this issue?
I have found that since installing the service pack for 2014, xclips in paper space have become blank, or, on occasion, 1 will show, but others won't. The invert still works, strangely enough.