I have a dynamic block that I created with a bunch of visibility, rotate and stretch parameters and actions. When I created said block, I meant to make it annotative but forgot about it during the initial block definition. Is there a way that I can make the block annotative now, or do I have to go back and re make the block all over again?
View 4 RepliesI have tried to make a dynamic block using annotative objects, text leaders, etc. The block was created initially as annotative but later somehow after going over it in the block editor. It has lost it's annotative properties. Is there a way to make a dynamic block that is not annotative, make it annotative. this block has only visibility features.
View 5 Replies View RelatedI have attached the block for reference. Now that I have found the error of my way with the annotative cutline. I have a slab-on-grade block that needs to have annotative hatches; I also need the cutline to be annotative and dynamic so that as the drawing scale changes the scale of the cutline will be match and I can adjust the length of the extension lines. I have made the cutline a nested annotative and dynamic block within the slab-on-grade block. When I insert the block into my drawing the cutline is annotative and the dynamic grips show up but they do not work.
View 0 Replies View RelatedI have a drawing with a dynamic annotative block. I want to export that block to another (new) drawing (similar as AutoCAD's wblock command). But whatever I try, I never get the block as a drawing, but always end up with a drawing containing the block.
Some of the things I tried:
i.e. 1:
structObjectId = objBlockTable[strBlockName];
objBlockTableRecord = (BlockTableRecord)objTransaction.GetObject(structObjectId, OpenMode.ForRead);
[Code].....
how to work with anno text and dims, but I need to create an annotative, dynamic block.
View 9 Replies View RelatedI'm setting up CAD standards for my office (title blocks, tool palletes, dynamic blocks, you know the drill). This should have been done long ago by another employee who makes more money than me, but that is beside the point. (Maybe you know the drill on that front too...)
This is a granite counter top fabrication shop, and I've created a dynamic block containing all the edging profiles we are producing at the moment. Contained in the block are "3D" versions of each profile, both with and without dimensions (for annotation purposes), and a 2D closed polyline showing only the "section" of the profile, to be exploded from the block and used as an extrusion shape when 3D drawings of the finished look of a countertop are necessary.
The issue I'm having is with scaling/annotative scaling. I have created a custom tool pallete with this edge profile block and a couple other dynamic "mark-up" blocks. (See Layout1 in the attached drawing.) What I need is for this edge profile block to insert into model space at "actual size" (3/4" thick), so when it is exploded and extruded, I'm creating that 3D edge at the proper proportion in my drawing. But for annotative purposes, I want to be able to insert the block at a different scale in paperspace (roughly at the size it is shown in the attached drawing).
CRYSTAL_TEPLATE01.dwg
I'm fairly new to using annotative objects, and I am having a lot of trouble with blocks and annotative multileaders.
I made a custom block (_ValveCallout) to be used in an annotative multileader, which was working perfectly, until I needed to edit the block I was using in the multileader. After I redefined the block, the attributes in the block seem to be displayed at the wrong scale, and the border around them isn't even showing at all. I have to redraw every multileader if I have to make a change to the block.
I "work in both worlds" It's somewhat important. (Windows at my "day job", Mac Student Ed for my University teaching.
I have an Annotative Associative block with attributes (TTFs). The Title attribute is multi-line. When the block used in a file that is opened in Windows, obvkously everything is fine. If that same drawing is opened in ACAD Mac, the position of the top attribute shifts and can't be corrected until the block is edited in Windows. (It has to be Windows because ACADmac can't edit associative blocks in this release.)
Process I used (MacBookPro 7,1):
Start ACAD12win (Parallels 7 w/WinXP), used default ACAD.DWT.inserted block "Tag Drawing Title", accepted all attribute value defaults, accepted default annotation scale of 1:1save fileopened file in ACAD12mac (multi-line attribute in wrong position)save fileOpened again in ACAD12win, and multi-line attribute is still in wrong position. Save fileOpened again in ACAD12mac, and multi-line attribute is in a greater incorrect position.
I want to determine the size of a (non-dynamic non-annotative) block definition (BlockTableRecord). Does a block have a boundry or limits? For example, if the block would contain a simple square, the size of the block would be equal to the size of the square.
View 4 Replies View RelatedI created the attached block to add spot elevations to a drawing. The block has attributes allowing elevations to be manually typed in, but also includes many dynamic features for rotation, lengthening, mirroring, etc. The block was created as an annotative block.
The block and all of its features work perfect as long as the dynamic features (rotation, etc) are not used after additional annotative scales are added. I often times have a drawing set at 1:10 or 1:20 scale and need to do an enlarged detail at 1:5.
What I would like to do is have this block set at 1:10 scale and 1:5 scale and manually rotate it (ideally using the dynamic features) at different angles for each scale. Is this possible and if so, why is it not working with this block? This works flawlessly when using annotative multileaders, so why shouldn't it work with blocks or is this just too labor intensive for the software?
I have also tried attsync, etc. and often times when rotating at different annotative scales, the text attributes go "bonkers" for the opposing scale when applying attsync.
I created an dynamic block few weeks ago and forgot to make it annotative. I try the ddchprop command, switch annotative to yes but it automatically immediately switch back to no.
View 2 Replies View RelatedI have this block with attributes and I go into Block Editor and I can select Annotative Yes (ie it's not greyed out) but when the drop down closes up it stays on No. I ended up cutting and pasting into a different drawing, Block Edit, etc and saving back. But I'm still curious as to why it wouldn't let me put it to Yes.
View 9 Replies View RelatedI'm trying to make a dynamic block of a column radiator.
It should be very simple. It's a 46mm wide module that comes in a range of heights (300, 500, 600, & 750mm) and a range of assembly widths (9, 13, 18, 22 & 27 modules wide - more commonly given as mm widths of 414, 598, 828, 1012 & 1242 respectively).
My attempt at constructing it has gone quite well, but when 'stretching' the block a ghost of the core 414 (w) x 300 (h) unit remains. I attach the block to give you a better idea of what I mean.
I have a co-worker who needs to create a block where the attributes scale with the anno scale, but the block container does not. He's creating a tree block and wants the canopy and trunk attributes to scale without scaling the tree symbol.
Making an attribute annotative and applying the scales to the attributes doesn't seem to work if the block itself isn't annotative.
Are we missing something, or is this just not possible?
Is there any trick that bring in an annotative block into a drawing at the annotative scale you are working in, not the scale the block was created in?
View 2 Replies View RelatedI'm looking to make a simple 3D-Block. From what i read online you cant really create a 3d-dynamic block.
What I want to do: Create a simple cube, then being able to change the size of the cube either with grips or typing in the heights, widths, lengths for the X,Y,Z.
This cube will be used for showing the (No-Fly Zones) for particular areas where VAV-boxes go in a building.
I could create a 2D block with different sizes to it and then insert the block near the VAV-box and then burst or explode the block to then extrude the shape to a required height. (We are working in 3D here)
The purpose for all this! Its then used in Coordination meetings for other trades to see how much clearance there is and required for the HVAC trade.
How do I make annotative tags, callouts, and blocks non-annotative. AutoCad will not let me change them in the properties tab.
View 1 Replies View RelatedI'm trying to make a dynamic block of a triangle, wich could react to enlargement of bottom corner. The main thing would be that the angle between corners never change ( that means when increasing the weight, the hight also increases.. ). Already for some time trying to do that using Strech action, but nothing works out. Maybe I'm using not that action tool?
View 9 Replies View RelatedI want to make a dynamic block of just text. I want to be able to insert a block with a drop down pick list of preset texts and select the text I want it to display.
The attached file containing the various options of text I want to be able to pick from the list. I want to maintain the insertion point common to each text variation shown with a crosshair and the justification of the text as right and the height as 10. I would like to know how to add/remove variations to the block too.
LINK TO FILE IF ATTACHMENT DOESN'T WORK
[URL]......
I am not familiar at all with the controls in the block editor.
I would need to make a dynamic title block and I've tried alot of thing but can't find the solution.
I'll link my block here.
with the example I want in it.
symbole.dwg
I want to make a dynamic block that is made up of a rectangle. This rectangle will have an arrow on one side. The dynamic part will be to rotate the arrow to the center of any of each of the four sides.
View 8 Replies View RelatedI've got a D Block that should be REALLY simple. It's an equipment rack that you can array to the side to add more, and stretch up with a linear parameter to change the overall height of the rack. However, we usually have numbers marking the rack units going up the side of the rack. I know there's no way to make the numbers increment with a dynamic block, so I just took them out.
I put in markers so that you could see where the rack units were, but they're not arraying properly!
Would it be possible to make a dynamic block for titleblocks with various layouts predefined in it?
To clarify, I currently have several titleblocks set up for the corresponding papersizes that i use, each one of these is a seperate block.
If i used a Dynamic Block could i incorporate several "layouts" into one block and one drawing?
I have a dwg with 40 blocks that have a non-annotative property. I can go through 1 by 1 and change the property to annotative and redefine the block. Is it possible to automate this? I have done some google searches but have not found anything I am able to cut and paste or put together to get it to work.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
I've made annotative blocks and I've made dynamic blocks... My intent is to integrate both but I can't find a way to move dynamic block parameters separately at different annotative scales.
In other words, if I insert an annotative dimension and add multiple scales I can move the dimension grips independently at each scale. If I insert a dynamic block I want to be able to use the dynamic block's action "grips" to do the same. However, with a dynamic block, if I move a stretch action at one annotation scale it moves the action at all annotation scales.
The attached file shows a simple example.
When I worked for my previous firm, they had a library full or blocks that would change scale by picking from a small pull down menu on the block itself. I could automatically change a section of a 4" CMU to an 8" CMU just by picking from the options. I am trying to create some of those now. Are those dynamic or annotative blocks. What is the parameter I would use.
View 9 Replies View RelatedI would like to make a 1" long, 1" diameter straight pipe as a block. I would like to insert that block into my drawing, say...on a 90 degree elbow. After inserting the straight stub, I would like to use a grip to "stretch" the pipe length to the next fitting. Ultimately, I would like to compile a parts list for my pipe drawing that will give me the straight pipe length. I've been doing some searching and 3d dynamic blocks seem to be impossible.
View 2 Replies View RelatedI have a line and would like one line of text above and MTEXT below.
Problem is the annotation scaling part where I can't seem to position the text so it scales to the line correctly.
It's ok at 1:100. I can't work out a way of doing it so that the line is central between the first two lines of text and the three lines have equal spacing.
I made a post in the autoCAD LT section, URL...And to save you the jump (though there's none of the fixes I've tried)I'm having issues with annotative symbols jumping around the page. As far as I can tell, it happens on certain symbols when I add a second(or more) annotative scale to that symbol. I can reset the symbols so that they're all aligned and sitting 'on top' of each other, but when I switch to different viewports/plot or save/open the drawing again they've reverted to the position they jump too. In the past I thought it might be something to do with where the basepoint was within the block, but having changed that, I still had the problem.
Both the blocks I've had it happen with are reasonably simple (one's an 'Auto Air Valve' symbol with a mask behind the lines, the other is a custom 'Section line' symbol although that also has some properties to allow me to extend the section line) objects. With the section line symbol I mirror it to get the second half, which is the half it's having the problem on. I wouldn't expect mirroring an object would do it though. The odd thing is, it's only happened in some drawings that I've done, and only with some symbols (which were all created at a similar time, so should have the same issues?),
I have a dynamic block that contains both geometry as well as text. I don't want the geometry to scale up based on the drawing scale but I do want the text to scle according to the drawing scale. I have tried making the text both annotative and non-annotative in the block and get the same result. I can get the text to scale properly if I make the entire block annotative but that also scales the geometry which is not accurate.
View 1 Replies View RelatedThere wasn't a metric template so I created one. I've also been working on setting up Annotative and Dynamic Blocks. Mostly we work in Imperial and so the blocks were drawn in Imperial units.
When I insert some of my Annotative Blocks (Section marks and Labels, etc.), some insert scaled up 25.4 (which is what I want) and others don't.
Take the attached examples:
SOIL-Gravel.dwg is not Annotative. Insunits is set to 1
NOTE-title.dwg is Annotative. Insunits is set to 1.
I notice on my Insert Dialog Box that the Block Unit Factor changes from 25.4 (SOIL) to 1
(NOTE).
For some reason NOTE-Section Cut (Annotative) inserts at 25.4, but the Dynamic Parameters fail to scale up.
I've played around with INSUNITSDEFSOURCE and INSUNITSDEFTARGET, but neither seem to change. I understand they only work if INSUNITS of the block is 0. Which I have also toggled.