AutoCAD Dynamic Blocks :: Annotative Symbols Jumping Around The Page
Feb 21, 2012
I made a post in the autoCAD LT section, URL...And to save you the jump (though there's none of the fixes I've tried)I'm having issues with annotative symbols jumping around the page. As far as I can tell, it happens on certain symbols when I add a second(or more) annotative scale to that symbol. I can reset the symbols so that they're all aligned and sitting 'on top' of each other, but when I switch to different viewports/plot or save/open the drawing again they've reverted to the position they jump too. In the past I thought it might be something to do with where the basepoint was within the block, but having changed that, I still had the problem.
Both the blocks I've had it happen with are reasonably simple (one's an 'Auto Air Valve' symbol with a mask behind the lines, the other is a custom 'Section line' symbol although that also has some properties to allow me to extend the section line) objects. With the section line symbol I mirror it to get the second half, which is the half it's having the problem on. I wouldn't expect mirroring an object would do it though. The odd thing is, it's only happened in some drawings that I've done, and only with some symbols (which were all created at a similar time, so should have the same issues?),
View 3 Replies
ADVERTISEMENT
May 5, 2010
I've made annotative blocks and I've made dynamic blocks... My intent is to integrate both but I can't find a way to move dynamic block parameters separately at different annotative scales.
In other words, if I insert an annotative dimension and add multiple scales I can move the dimension grips independently at each scale. If I insert a dynamic block I want to be able to use the dynamic block's action "grips" to do the same. However, with a dynamic block, if I move a stretch action at one annotation scale it moves the action at all annotation scales.
The attached file shows a simple example.
View 2 Replies
View Related
Aug 17, 2012
I've just started to learn how to use Annotative Blocks and i'm running into what is probably a very simple problem. I'm creating a block and want to assign annotative scales to it. Once created, I insert the block into the drawing I need to use it in, and the only scale that shows up is the scale that is active when inserted.
All the other scales I added when creating the block are gone and I then have to assign the scales to the block again. I would prefer not to have to manually assign the scales every time the block in inserted into a drawing.
View 4 Replies
View Related
Oct 28, 2013
When I worked for my previous firm, they had a library full or blocks that would change scale by picking from a small pull down menu on the block itself. I could automatically change a section of a 4" CMU to an 8" CMU just by picking from the options. I am trying to create some of those now. Are those dynamic or annotative blocks. What is the parameter I would use.
View 9 Replies
View Related
Jul 2, 2013
I'm fairly new to using annotative objects, and I am having a lot of trouble with blocks and annotative multileaders.
I made a custom block (_ValveCallout) to be used in an annotative multileader, which was working perfectly, until I needed to edit the block I was using in the multileader. After I redefined the block, the attributes in the block seem to be displayed at the wrong scale, and the border around them isn't even showing at all. I have to redraw every multileader if I have to make a change to the block.
View 2 Replies
View Related
Aug 26, 2011
I have a line and would like one line of text above and MTEXT below.
Problem is the annotation scaling part where I can't seem to position the text so it scales to the line correctly.
It's ok at 1:100. I can't work out a way of doing it so that the line is central between the first two lines of text and the three lines have equal spacing.
View 1 Replies
View Related
Oct 1, 2011
I "work in both worlds" It's somewhat important. (Windows at my "day job", Mac Student Ed for my University teaching.
I have an Annotative Associative block with attributes (TTFs). The Title attribute is multi-line. When the block used in a file that is opened in Windows, obvkously everything is fine. If that same drawing is opened in ACAD Mac, the position of the top attribute shifts and can't be corrected until the block is edited in Windows. (It has to be Windows because ACADmac can't edit associative blocks in this release.)
Process I used (MacBookPro 7,1):
Start ACAD12win (Parallels 7 w/WinXP), used default ACAD.DWT.inserted block "Tag Drawing Title", accepted all attribute value defaults, accepted default annotation scale of 1:1save fileopened file in ACAD12mac (multi-line attribute in wrong position)save fileOpened again in ACAD12win, and multi-line attribute is still in wrong position. Save fileOpened again in ACAD12mac, and multi-line attribute is in a greater incorrect position.
View 3 Replies
View Related
Jul 14, 2011
I have a dynamic block that contains both geometry as well as text. I don't want the geometry to scale up based on the drawing scale but I do want the text to scle according to the drawing scale. I have tried making the text both annotative and non-annotative in the block and get the same result. I can get the text to scale properly if I make the entire block annotative but that also scales the geometry which is not accurate.
View 1 Replies
View Related
Oct 29, 2012
My company is in the process of updating the entire block library to be annotative or dynamic (depending on the usage) and it's been wonderful for new projects.
The problem comes in when we have to update an existing dwg. When we try to "blockreplace" the new annotative tags for the old non-annotative tags. These tags have attributes, but we have literally not changed anything about the blocks except the "annotativedwg" property within the root block file. When we run block replace, the old blocks disappear completely! they're not at a teeny scale or a gigantic scale, they're not on an "off" or "frozen" layer, they just fully go away even if you say "don't purge the old block that is being replaced".
I usually don't have a problem "doing my job" and just going through and replacing them individually on the smaller sized projects, but most of our projects have upwards of 700 - 1000 tags per dwg. Slightly tedious as you can imagine, especially since I am addicted to finding newer faster better ways to draw.
View 9 Replies
View Related
Jan 3, 2013
How do I make annotative tags, callouts, and blocks non-annotative. AutoCad will not let me change them in the properties tab.
View 1 Replies
View Related
Feb 14, 2012
I'm having issues with annotative symbols jumping around the page. As far as I can tell, it happens on certain symbols when I add a second(or more) annotative scale to that symbol. I can reset the symbols so that they're all aligned and sitting 'on top' of each other, but when I switch to different viewports/plot or save/open the drawing again they've reverted to the position they jump too.
In the past I thought it might be something to do with where the basepoint was within the block, but having changed that, I still had the problem.
Both the blocks I've had it happen with are reasonably simple (one's an 'Auto Air Valve' symbol with a mask behind the lines, the other is a custom 'Section line' symbol although that also has some properties to allow me to extend the section line) objects. With the section line symbol I mirror it to get the second half, which is the half it's having the problem on. I wouldn't expect mirroring an object would do it though.
The odd thing is, it's only happened in some drawings that I've done, and only with some symbols (which were all created at a similar time, so should have the same issues?), so I can't think of what it could be.
View 9 Replies
View Related
Sep 23, 2011
I have attached the block for reference. Now that I have found the error of my way with the annotative cutline. I have a slab-on-grade block that needs to have annotative hatches; I also need the cutline to be annotative and dynamic so that as the drawing scale changes the scale of the cutline will be match and I can adjust the length of the extension lines. I have made the cutline a nested annotative and dynamic block within the slab-on-grade block. When I insert the block into my drawing the cutline is annotative and the dynamic grips show up but they do not work.
View 0 Replies
View Related
Mar 15, 2012
I have created a dynamic block with several visiblility states. The block works great for what I need it for. however, I am trying to add one more action to the block but am having issues.
This block is essentially a 24" retail cabinet with the visibility states showing the different drawer and shelf configurations. I want to be able to lengthen the cabinet in 24" increments and have the visibility show for each 24" section.....e.g. I want a 10' cabinet so I bring in the 24" starter block. Then stretch the cabinet to the 10' mark, then I can chose any drawer/shelve config for each 24" section (they are all different).
I can get the block to stretch in 24" sections....no problem.....i just want the visibility state to be duplicated as well for each section. Now as it stretches, there is only one Vis state and it only populates the first cabinet.
I could do this by copying the block over and over 5 times.....but I am hoping there is a way to make this dynamic.
View 7 Replies
View Related
Apr 23, 2013
I have a block I am making into a Dynamic Block. I will be adding in different visibility states. Depending on the visibility state the block would need to be inserted from a different point.
My question is, is it possible to add multiple insertion points to a dynamic block so depending on the visibility state it defaults to the correct insertion point?
View 2 Replies
View Related
Sep 7, 2012
is there a way to make dynamic blocks stretchable similar to a mleader,
the blocks i create are only stretchable by grips, and not by crossing
(i am using linear or point parameter stretches)
View 2 Replies
View Related
Jun 1, 2006
Is there anyway to link standard AutoCAD Grips and there commands to Dynamic Block Actions? I want to stretch an arc by its midpoint grip. This accomplishes something that no other commands do.
View 4 Replies
View Related
Aug 29, 2011
How to use annotative blocks; I searched the forums and used google a lot but I still don't get it. The problem is me, that is for shure! I have been using regular blocks for ages, and since a year or so I use dynamic block also.
It won't get through to me how the annotative option should work, I try, click and see but none of the results are what I am after.
This is my situation; I clean up a drawing (a building like a house), this I use as an xref. Once it is Xreffed to a new *.dwg I set dimscale to 50. For Nearly all of mij viewports are set to 1:50. All the blocks I insert are scaled up * dimscale.
Like a block that is 3mmx3mm is inserted as 150x150. Now, in some occasions, I have 2 viewports with a different scale. One is 1:50, the other is 1:100. I want the block to look the same in the 1:100 VP as it does in the 1:50VP. But it ain't happening.
If I insert the block when dimscale is 1, then the annotation works, but is it worthless in modelspace for the blocks are a factor 50 too small.
View 2 Replies
View Related
Mar 22, 2013
So I've done a reasonable amount of work with dynamic blocks. I have a block with a rotation action and grip to arbitrarily align it. However I realized when trying to combine it with an alignment grip (which actions on the basic or fundamental block rotation angle) that there didn't seem to be a way to some how link a dynamic block rotation action or one of the custom angle properties to a the fundamental block rotation angle. Thus there are two additive rotations at work; the dynamic block one with its grip and the fundamental rotation property.
This can cause some confusion when one person aligns with the grip and another via rotating the block's fundamental property and would also be problematic in the generalized sense if one was trying to select or programmatically read back the net angle alignment.
View 2 Replies
View Related
Jun 13, 2013
I have a dynamic block, that represents a stirrup.
I inserted in the block a Block Propreties Table, that have some preset dimensions for the stirrups. The grip of this table I decided to put in the top right corner.
The problem is that I can't make this grip moveable )
See the attachement with the block
View 1 Replies
View Related
Jul 25, 2012
new to dynamic blocks but looking to streamline my wiring diagrams here and have created a block that shows the typical wire styles we use in a simple easy way. I now want to add an overall flip to the entire block and have not been able to find set this. I would prefer to use the same label and go from there. I have included the block to show what I mean. It is only working on the single visible item at the one time. I know this has to be possible just let me know what I am doing wrong. I am running AutoCad LT 2013
View 3 Replies
View Related
Feb 28, 2012
I need to create a dynamic block for a "Glass Panel" in a balustrade. I need to be able to insert it, in one corner and stretch it in another corner, to suit the staircase angle.
I've created the block, but it isn't working correctly. I've attached a drawing, with the left hand drawing a sketch of how it needs to be. The right hand drawing is my dynamic block attempt. As can be seen, when the block is stretched between the 2 points, it doesn't follow the angle of the staircase correctly (Very slight run off)
View 9 Replies
View Related
Nov 21, 2011
I wish to create a dynamic block containing some attributes. These attributes are inside rectangles that can't be modified in length using linear parameters ; but the attribute has to be always in the middle of the rectangle. So, I draw a line inside the rectangle (in a hidden layer) and insert the attribute with center justification (not sure for the translation) that I place in the middle of this line ; then I put a coincidence constraint (not sure for the translation, but it's the first one) linking the middle of the line with the middle of the attribute.
But here's the problem : when stretching my rectangle, the insertion point of the attribute suddenly changes from "center" to "bottom left".
View 2 Replies
View Related
Dec 4, 2013
I am looking for a way to use the ATTIN/ATTOUT workflow to bring in data from an excel spreadsheet to drive the size of each of my block's instances. The block will be simple, a rectangle, with width and length parameters. For each entity in my excel/csv file these parameter values are spelled out. I know how to display these parameters in my attributes, but I don't know how, if I were to feed in these values, to drive the geometry. If there's a better way to take a list of width and length values to generate a series of blocks each with a rectangle containing its respective size.
View 1 Replies
View Related
Nov 7, 2011
I need to do some repetitive task on a lot of dynamic blocks, unfortunately, when I open each file, AutoCAD keeps asking if I want to open it with the block editor.
Is there a way to disable that dialog and open the files as normal dwgs?
A hint: BLOCKEDITLOCK doesn't make it, it shows another dialog...
View 4 Replies
View Related
Feb 15, 2012
usage of dynamic title blocks with visiblity states and defining page setup override templates which use same for quick plotting using sheet sets.
I have attached a simple dynamic block that I built which is the outter frame of our company title block, it is designed to allow users to quickly switch between Landscape and Portrait orientations.
The problem I am having is when I go to define page setups for my Sheet Set Page Setup Override Template I am unable to use the "Extents" option with auto-center because the "Extents", as defined by the page setup, includes ALL objects in the paper space regardless of visibility, so my title block ends up being centered in a stupid way if that printing configuration is used.
The only solution I have found is to use the "Layout" option when defining page setups, but this option produces other issues in other ways when printing. I don't want to use the "Window" option either for the potential for users to be using the page setup overrides to print drawings using different paper sizes or drawings that were not originally created using the current template the override is designed to accomodate.
Is there perhaps a system variable that defines whether invisible objects are included in the "Extents" setting in the page setup? I'm sure you'll all agree that Extents is the way to go in this situation, but it is not performing exactly as required.
View 5 Replies
View Related
Mar 26, 2012
I'm trying to make a dynamic block of a column radiator.
It should be very simple. It's a 46mm wide module that comes in a range of heights (300, 500, 600, & 750mm) and a range of assembly widths (9, 13, 18, 22 & 27 modules wide - more commonly given as mm widths of 414, 598, 828, 1012 & 1242 respectively).
My attempt at constructing it has gone quite well, but when 'stretching' the block a ghost of the core 414 (w) x 300 (h) unit remains. I attach the block to give you a better idea of what I mean.
View 4 Replies
View Related
Jul 16, 2010
I have a drawing ("SURUBURI.dwg") with several dynamic blocks ("M12", "M16", "M18" ... an so on...). I want to insert in my current drawing, one of the blocks from SURUBURI.dwg, for instance the block named "M12".
For that i tried creating a new command "INSERT_M12" that has the following script :
^C^C-INSERT; "I:/Ionut Mihaila/Goodies/SURUBURI.dwg/M12"
Now obvious that doesn't work, but i think it shows clearly what i want to accomplish. So is there an other way to do this?
View 9 Replies
View Related
Sep 18, 2013
I'm working on a drawing and I want an action to work on two diffrent dynamic blocks.
In my case, I wish to have two blocks that I can rotate by one rotation grip.
How do I manage to work this out?
View 1 Replies
View Related
Feb 4, 2011
I have successfully created a dynamic block. I can insert it into AutoCAD, and it behaves like I want, except for one thing.
I can select the block and change it by taking a grippoint and place it at another position. So my block is e.q. stretched, just like I wanted.
But then. When I want to use the ordinary STRETCH command of AutoCAD, I can only stretch the insertion point of the block, but not the grippoints. Is there a way to set a grippoint to be select edable by commands like STRETCH.
View 9 Replies
View Related
Oct 11, 2012
What is the variable to change the dynamic grip parameter size and color.
View 3 Replies
View Related
Dec 13, 2013
I'm working on a dynamic door, that has specific parameters to change its size and orientation. Everything works pretty good, only the arc for the door won't react the way I want it.
View 8 Replies
View Related
