I have a line and would like one line of text above and MTEXT below.
Problem is the annotation scaling part where I can't seem to position the text so it scales to the line correctly.
It's ok at 1:100. I can't work out a way of doing it so that the line is central between the first two lines of text and the three lines have equal spacing.
I have a dynamic block that contains both geometry as well as text. I don't want the geometry to scale up based on the drawing scale but I do want the text to scle according to the drawing scale. I have tried making the text both annotative and non-annotative in the block and get the same result. I can get the text to scale properly if I make the entire block annotative but that also scales the geometry which is not accurate.
View 1 Replies View RelatedI've made annotative blocks and I've made dynamic blocks... My intent is to integrate both but I can't find a way to move dynamic block parameters separately at different annotative scales.
In other words, if I insert an annotative dimension and add multiple scales I can move the dimension grips independently at each scale. If I insert a dynamic block I want to be able to use the dynamic block's action "grips" to do the same. However, with a dynamic block, if I move a stretch action at one annotation scale it moves the action at all annotation scales.
The attached file shows a simple example.
I've just started to learn how to use Annotative Blocks and i'm running into what is probably a very simple problem. I'm creating a block and want to assign annotative scales to it. Once created, I insert the block into the drawing I need to use it in, and the only scale that shows up is the scale that is active when inserted.
All the other scales I added when creating the block are gone and I then have to assign the scales to the block again. I would prefer not to have to manually assign the scales every time the block in inserted into a drawing.
When I worked for my previous firm, they had a library full or blocks that would change scale by picking from a small pull down menu on the block itself. I could automatically change a section of a 4" CMU to an 8" CMU just by picking from the options. I am trying to create some of those now. Are those dynamic or annotative blocks. What is the parameter I would use.
View 9 Replies View RelatedIn the attached block, how can I contraints the red line to follow the end of the attribute text?
View 3 Replies View RelatedI'm fairly new to using annotative objects, and I am having a lot of trouble with blocks and annotative multileaders.
I made a custom block (_ValveCallout) to be used in an annotative multileader, which was working perfectly, until I needed to edit the block I was using in the multileader. After I redefined the block, the attributes in the block seem to be displayed at the wrong scale, and the border around them isn't even showing at all. I have to redraw every multileader if I have to make a change to the block.
What do I need: In the example I will mark attributes with underlined text, and simple text with bold text
(Position)numberDiamdiam
Diam= diameter symbol
In the model space, I enter values:
Position = 3
number = 15
diam = 12
I need to get:
(3)15Diam12
instead of
(3 )15 Diam12
Is it possible to make an Attribute, take as a "Position X" value, the "Text alignment X" from a text ?
I "work in both worlds" It's somewhat important. (Windows at my "day job", Mac Student Ed for my University teaching.
I have an Annotative Associative block with attributes (TTFs). The Title attribute is multi-line. When the block used in a file that is opened in Windows, obvkously everything is fine. If that same drawing is opened in ACAD Mac, the position of the top attribute shifts and can't be corrected until the block is edited in Windows. (It has to be Windows because ACADmac can't edit associative blocks in this release.)
Process I used (MacBookPro 7,1):
Start ACAD12win (Parallels 7 w/WinXP), used default ACAD.DWT.inserted block "Tag Drawing Title", accepted all attribute value defaults, accepted default annotation scale of 1:1save fileopened file in ACAD12mac (multi-line attribute in wrong position)save fileOpened again in ACAD12win, and multi-line attribute is still in wrong position. Save fileOpened again in ACAD12mac, and multi-line attribute is in a greater incorrect position.
I made a post in the autoCAD LT section, URL...And to save you the jump (though there's none of the fixes I've tried)I'm having issues with annotative symbols jumping around the page. As far as I can tell, it happens on certain symbols when I add a second(or more) annotative scale to that symbol. I can reset the symbols so that they're all aligned and sitting 'on top' of each other, but when I switch to different viewports/plot or save/open the drawing again they've reverted to the position they jump too. In the past I thought it might be something to do with where the basepoint was within the block, but having changed that, I still had the problem.
Both the blocks I've had it happen with are reasonably simple (one's an 'Auto Air Valve' symbol with a mask behind the lines, the other is a custom 'Section line' symbol although that also has some properties to allow me to extend the section line) objects. With the section line symbol I mirror it to get the second half, which is the half it's having the problem on. I wouldn't expect mirroring an object would do it though. The odd thing is, it's only happened in some drawings that I've done, and only with some symbols (which were all created at a similar time, so should have the same issues?),
The attached DynBlk needs to be Constrined. As an LT user I am unable to do so.If you rotate the block thru the range you will notice that the green line changes its relationship to the dark line.I would like for it to remain 5-1/2" from the dark line. (Truth be told I would like for it to stretch to 7-1/4 and 9-1/4 as well but that's another day.)
View 9 Replies View RelatedI just called up a drawing I haven't worked on in a while. All the text is annotative with 2 scales, 1/8 & 1/4 and worked just fine. Now I see both scales at once, I can't get "grips" on it, it won't edit, and when I list it, it comes up as object type block "*uxxx", not text. If I explode it, it becomes text again, but as two separate notes of different sizes, and both remain visible, even though the anno scale is set for 1/8. Drawings that reference this also show both scales at once.
View 4 Replies View RelatedI try to create a new pipe dynamic block. But I have a problem with my block. In the block, the distance2 I wanna change to some sizes follow the table. And the center line, it changes follow the sizes table, and must be center line when I change pipe size. I can not do it. How to make the block working correctly.
View 8 Replies View RelatedMy company is in the process of updating the entire block library to be annotative or dynamic (depending on the usage) and it's been wonderful for new projects.
The problem comes in when we have to update an existing dwg. When we try to "blockreplace" the new annotative tags for the old non-annotative tags. These tags have attributes, but we have literally not changed anything about the blocks except the "annotativedwg" property within the root block file. When we run block replace, the old blocks disappear completely! they're not at a teeny scale or a gigantic scale, they're not on an "off" or "frozen" layer, they just fully go away even if you say "don't purge the old block that is being replaced".
I usually don't have a problem "doing my job" and just going through and replacing them individually on the smaller sized projects, but most of our projects have upwards of 700 - 1000 tags per dwg. Slightly tedious as you can imagine, especially since I am addicted to finding newer faster better ways to draw.
I have been working on a drawing with 3 different dynamic blocks for several weeks and everything has been working perfectly. However, all of a sudden this afternoon, the text in all 3 dynamic blocks disappeared and will not display on the screen in paper or model space, and does not print.
As best I recall, I was creating a polyline viewport when this text disappeared.
I cannot turn the text on in these dynamic blocks. The text in on layer 0 which is on, and is unlocked and unfrozen. Additionally I have turned on, unlocked and unfroze all layers in the dwg and this does not work. I have also checked the text layer in the block editor and it is on layer 0.
When I click on any of the blocks, all the information appears to be correct, ie: door numbers, text style, etc. The text, however, just does not appear. Also I have never set any invisible text parameters and when I open the block editor, nothing in the invisible text area is selected or select-able.
Previous versions of this drawing, which I saved yesterday, display all block text perfectly. Perhaps there is a setting I accidentally hit which caused this problem?
I have tried repeatedly turning on all the layers, unfreezing, unlocking, changing parameters in the Style menu. I closed Autocad and turned the computer completely off and back on again.
How do I make annotative tags, callouts, and blocks non-annotative. AutoCad will not let me change them in the properties tab.
View 1 Replies View RelatedI want to create some symbols which includes text. For example, I have a square with an "F" centered within the square. The problem I am having is when I insert the block into a drawing and rotate it, the "F" also rotates. Is there any way to make it so the "F" is always horizontal no matter how I rotate the block?
View 2 Replies View RelatedPlease see the attached drawing. It's for a conveyor system, and the idea is that when you insert the block, you could then select the size of the conveyor and the angle of the turn (straight sections are another block).
What is suppose to happen is, when you insert the block, you stretch the conveyor to the size desired, and the rest of the block should scale to match. Then you select the angle of "turn", and you're good to go.
I got it all to work except... when you stretch the line out, everything scales, but the line doesn't stay in place and just stretch to the left, it moves, which leaves a gap where the conveyor should be.
The problem happens in different blocks created in Autocad 2009. I need to make blocks with many visibilities and, sometimes, only a few lines need to be turned invisible from a visibility state. Many times when I remove the visibility of a line from a single visibility state, the line erased on all the visibility states. I make my lines "all visible" and it's not there anymore.
The problem is probably in my block since it's doing the same problem on someone else's computer. If the problem is my block, is there a way to "uncorrupt" it?
I've only got LT2008 at the moment, but this is a pet project that if my office upgrades me I want to finish.
Is it possible to rotate a line by using the length of a separate line? But the degrees of rotation need to be worked out by the length of the line
as in the following sum
angle of rotated line = (fixed number/360) * length of linear line
Left handed and PROUD
I know this is located in other locations but I can't seem to make it work with my block.
I would like the cross and the text N to rotate independantly of the arrow while the N stays with the thick line. That's the easy part. How can I make the N move along the rotation path and keep the text aligned horizontally? I read something about linked action and move, but I can't make it work.
We have a title block wherein the Location attribute is normally a single line, but occasionally is two or more lines. Within the title block this attribute is surrounded by lines, left, right, top, bottom.
We would like the bottom line to move down when the user adds additional lines to the attribute.
I'm trying to create a pline in a dynamic block where the length is determined by two values I would input into properties or as attributes.
The first value 'A' will be a ground surface elevation
The second value 'B' will be a ground water elevation
I would like to the pline to have a length of A minus B.
I would then also like to have mtext (or any other method of display text) to display the values of A and B.
For example, if I have a ground surface of 102 and a ground water of 91, my line length will be 11, and I can display a label of '102' at the top of the line and '91' at the bottom of the line.
I've created dynamic blocks before, but none that have used an expression of two values or having to display inputted values. I'm not really sure where to start with this, or if it's even possible.
I am having trouble trying to add text to a dynamic block that will stay locked and centered when I stretch it left/right and up/down. The default text I am looking to have should be 36x24 (36 is the lenght of the unit, 24 is the depth). I can also upload my block.
View 7 Replies View RelatedI have attached the block for reference. Now that I have found the error of my way with the annotative cutline. I have a slab-on-grade block that needs to have annotative hatches; I also need the cutline to be annotative and dynamic so that as the drawing scale changes the scale of the cutline will be match and I can adjust the length of the extension lines. I have made the cutline a nested annotative and dynamic block within the slab-on-grade block. When I insert the block into my drawing the cutline is annotative and the dynamic grips show up but they do not work.
View 0 Replies View RelatedI have created a dynamic block with several visiblility states. The block works great for what I need it for. however, I am trying to add one more action to the block but am having issues.
This block is essentially a 24" retail cabinet with the visibility states showing the different drawer and shelf configurations. I want to be able to lengthen the cabinet in 24" increments and have the visibility show for each 24" section.....e.g. I want a 10' cabinet so I bring in the 24" starter block. Then stretch the cabinet to the 10' mark, then I can chose any drawer/shelve config for each 24" section (they are all different).
I can get the block to stretch in 24" sections....no problem.....i just want the visibility state to be duplicated as well for each section. Now as it stretches, there is only one Vis state and it only populates the first cabinet.
I could do this by copying the block over and over 5 times.....but I am hoping there is a way to make this dynamic.
I have a block I am making into a Dynamic Block. I will be adding in different visibility states. Depending on the visibility state the block would need to be inserted from a different point.
My question is, is it possible to add multiple insertion points to a dynamic block so depending on the visibility state it defaults to the correct insertion point?
Is there any way to have a dynamic block which utilises a similar function to TCOUNT. I am doing drawings for solar panel installations and have set up a dynamic block for our different panels that we use, which i have used xy paramater with the array action to make life simple when inserting panels onto a drawing... however we number these panels 1 to ~ ... we could have 3 on one roof but we could also have over 100... is there any way to have the dynamic block auto increment the text automatically? At the moment i use the block to show 20 panels then i explode and use the tcount command to increment the text in selection order.
Or... how i could go about doing lets say a data entry for example insert block-> Dialogue for amount of panels / amount of panels in a row or column? And after selecting that data the block will automatically have numbers 1-x...
I have attached a sample block so you can try and get an understanding of what im after.
I am trying to set constraints to this block and having some issues. I want to constrain the attribute text so when I stretch the block from the grips the text centers itself automatically within itself. The constraints will not let me pick the grip on the attribute text as a point.
View 2 Replies View RelatedIs it possible to increment text or attributes in a dynamic block? I'm want to create elevation text for grids that can start at a certain value and increment up or down from there.
View 1 Replies View RelatedThis is just a basic block to specify a section plane. What I would like to have is a BPT with 4 rotation options (0, 90 180, 270) that would rotate the whole block but it would keep the text upright and be able to stretch the ends of the arrows. I know I must be including/not including something important. Pointers on how to do this
View 7 Replies View Related