I have created an annotative block. This block is displayed in a few different viewports at different scales. After I create the block I go and check the viewports and it is displaying well. The linework (polylines and a circle) is annotative as is the text in the block.
However, if I then change the scale/annotative scale of a viewport, the block doesn't seem to update properly. The text within the block updates to the new size although the linework within the block doesn't seem to scale and resets back to the model space size.
I've tried regenning etc with no luck. Is there a command I need to use after changing a viewport scale to force annotative blocks to update?
I have attached the block for reference. Now that I have found the error of my way with the annotative cutline. I have a slab-on-grade block that needs to have annotative hatches; I also need the cutline to be annotative and dynamic so that as the drawing scale changes the scale of the cutline will be match and I can adjust the length of the extension lines. I have made the cutline a nested annotative and dynamic block within the slab-on-grade block. When I insert the block into my drawing the cutline is annotative and the dynamic grips show up but they do not work.
I have a co-worker who needs to create a block where the attributes scale with the anno scale, but the block container does not. He's creating a tree block and wants the canopy and trunk attributes to scale without scaling the tree symbol.
Making an attribute annotative and applying the scales to the attributes doesn't seem to work if the block itself isn't annotative.
Are we missing something, or is this just not possible?
Is there any trick that bring in an annotative block into a drawing at the annotative scale you are working in, not the scale the block was created in?
I have a dwg with 40 blocks that have a non-annotative property. I can go through 1 by 1 and change the property to annotative and redefine the block. Is it possible to automate this? I have done some google searches but have not found anything I am able to cut and paste or put together to get it to work.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit C3D 2014 SP1 Dell M6600, Core i7 @ 2.3GHz, 16 GB ram Dell T3500 workstation, too much ram to post
We use a number of blocks with block tables for data extraction here, and whenever one of the blocks is modified and updated, all of the block tables reset to the default value. This happens for any block reference change, not just changes to the block table (which makes sense that it would reset).
How can we update these blocks without having to manually change all of the block tables afterwards?
I have a drawing with a dynamic annotative block. I want to export that block to another (new) drawing (similar as AutoCAD's wblock command). But whatever I try, I never get the block as a drawing, but always end up with a drawing containing the block.
Why can I not check the Annotative Scale box for the attribute? Please see attached. The circle scales up and down but I only see the text in the 1/8" scale and but not in the 3/16" scale. The 3/16" scale is selected in the attributes scale box.
I have a dynamic block that I created with a bunch of visibility, rotate and stretch parameters and actions. When I created said block, I meant to make it annotative but forgot about it during the initial block definition. Is there a way that I can make the block annotative now, or do I have to go back and re make the block all over again?
What the Issue is; I'm trying to field text from my "station number" block (which is Annotative) to my schedule. It will link at first but when I close the drawing and re-open the same drawing somehow the links/field between the "station number" and schedule break. Works fine if the block is non Annotative??
I'm setting up CAD standards for my office (title blocks, tool palletes, dynamic blocks, you know the drill). This should have been done long ago by another employee who makes more money than me, but that is beside the point. (Maybe you know the drill on that front too...)
This is a granite counter top fabrication shop, and I've created a dynamic block containing all the edging profiles we are producing at the moment. Contained in the block are "3D" versions of each profile, both with and without dimensions (for annotation purposes), and a 2D closed polyline showing only the "section" of the profile, to be exploded from the block and used as an extrusion shape when 3D drawings of the finished look of a countertop are necessary.
The issue I'm having is with scaling/annotative scaling. I have created a custom tool pallete with this edge profile block and a couple other dynamic "mark-up" blocks. (See Layout1 in the attached drawing.) What I need is for this edge profile block to insert into model space at "actual size" (3/4" thick), so when it is exploded and extruded, I'm creating that 3D edge at the proper proportion in my drawing. But for annotative purposes, I want to be able to insert the block at a different scale in paperspace (roughly at the size it is shown in the attached drawing).
I created an dynamic block few weeks ago and forgot to make it annotative. I try the ddchprop command, switch annotative to yes but it automatically immediately switch back to no.
Is it true that you can't attach an Annotative Block to a MultiLeader?This is the message that I got when trying: "Specify leader arrowhead location or [leader Landing first/Content
first/Options] <Options>: OP Enter an option [Leader type/leader lAnding/Content type/Maxpoints/First angle/Second angle/eXit options] <eXit options>: C Select a content type [Block/Mtext/None] <Block>: Enter block name <DOORTAG>: LEGENDNOTE Invalid Input."
It's unfortunate because I would like the block to show up Annotative in my Legend, and then again to the proper scale with the Multi Leader
I want to create a block that has the level # on top of the little triangle thingy (yes, highly technical terms are in use), that will automatically resize BOTH the size of the text and the size of the triangle depending on which scale I'm in.
At the moment I can figure out how to make the TEXT (aka the #) annotative, but the triangle stays the same size no matter what scale I'm in. Not only that, but then the text doesn't stay consistently next to the triangle symbol when I change scales.
I want a block where BOTH the Text size for the level AND the triangle symbol itself will always be correct, regardless of what scale my viewport is in. Aka, I put a level symbol for +5.72 in the correct position in Model Space. In Paper Space, my 1:50 viewport and my 1:100 viewports are EACH showing the +5.72 triangle level sign, in the correct place, with the triangle and text being the correct size.
I have this block with attributes and I go into Block Editor and I can select Annotative Yes (ie it's not greyed out) but when the drop down closes up it stays on No. I ended up cutting and pasting into a different drawing, Block Edit, etc and saving back. But I'm still curious as to why it wouldn't let me put it to Yes.
I've got a dynamic block for an irrigation spray head that I want to make annotative. My problem is that I need to spray radius (i.e. 15', 10') to stay the same, but the head symbol and text to scale with the viewport. So far I've only been able to make the entire block annotive. I've attached a of the block for refence.
I'm fairly new to using annotative objects, and I am having a lot of trouble with blocks and annotative multileaders.
I made a custom block (_ValveCallout) to be used in an annotative multileader, which was working perfectly, until I needed to edit the block I was using in the multileader. After I redefined the block, the attributes in the block seem to be displayed at the wrong scale, and the border around them isn't even showing at all. I have to redraw every multileader if I have to make a change to the block.
I have tried to make a dynamic block using annotative objects, text leaders, etc. The block was created initially as annotative but later somehow after going over it in the block editor. It has lost it's annotative properties. Is there a way to make a dynamic block that is not annotative, make it annotative. this block has only visibility features.
I was just notified I am supposed to show a small class how to make our company title blocks using attributes and what annotative scaling is and how to use it. videos or related forums so I can set up something to show tomorrow morning. We are going to be setting up our block library and setting up our title blocks. Should this be done using templates for each paper size?
I'm trying to create and add a block to our standards. A user wanted to make it annotative. Our company hasn't used them much. I think I'm starting to understand them better. It is just a simple HVAC symbol with two attribute definitions. The block I received was a scaled up block for 1/8" - 1'-0". I shrunk it down to normal 1:1 size to match what is would look like on paperspace with 1/8" text. Now to make it annotative.
- Do I add scales to it or leave it as is? The users may need need most of the scale that are defined.
- How do I save scales on the block for them to use?
I "work in both worlds" It's somewhat important. (Windows at my "day job", Mac Student Ed for my University teaching.
I have an Annotative Associative block with attributes (TTFs). The Title attribute is multi-line. When the block used in a file that is opened in Windows, obvkously everything is fine. If that same drawing is opened in ACAD Mac, the position of the top attribute shifts and can't be corrected until the block is edited in Windows. (It has to be Windows because ACADmac can't edit associative blocks in this release.)
Process I used (MacBookPro 7,1): Start ACAD12win (Parallels 7 w/WinXP), used default ACAD.DWT.inserted block "Tag Drawing Title", accepted all attribute value defaults, accepted default annotation scale of 1:1save fileopened file in ACAD12mac (multi-line attribute in wrong position)save fileOpened again in ACAD12win, and multi-line attribute is still in wrong position. Save fileOpened again in ACAD12mac, and multi-line attribute is in a greater incorrect position.
I want to determine the size of a (non-dynamic non-annotative) block definition (BlockTableRecord). Does a block have a boundry or limits? For example, if the block would contain a simple square, the size of the block would be equal to the size of the square.
I have a drawing that has about 450 identical instances of a block. The block has visibility options to show different things. I don't want to edit the block as there isn't anything wrong with it.
What i need to is update the blocks all together to change visibilities.
I'm having an issue with creating a column bubble block that would have an attribute and both be annotative.
I've created a 3/8" dia circle with 3/16" text and the text is NOT annotative. The bottom of the circle is at 0,0 with the text justification at MC
I create the block of the circle and text and make it annotative and save
When I insert it into another drawing, the block inserts properly and scales as desired. The issue is when inserted, I'm NOT given the option to fill in the column # attribute. I can double click and enter text, but this should happen during insertion.
When I create the block, if I do NOT select the attribute as part of the block, I am given the option for the attribute during insertion but it does not scale automatically.
What am I doing wrong? I'm attaching my block as an example.
Annotative block moves when annotation scale changed,
The solution for this problem is mentioned in the link below but sounds not to be useful:
[URL]....
I got a block that contains an attribute (attached) and created on layer zero while the current annotation scale is 1:100. As this annotation scale is changed (say to 1:200 or 1:50) this block moves from its original place to another one (as shown in the attached screenshots).
I created the attached block to add spot elevations to a drawing. The block has attributes allowing elevations to be manually typed in, but also includes many dynamic features for rotation, lengthening, mirroring, etc. The block was created as an annotative block.
The block and all of its features work perfect as long as the dynamic features (rotation, etc) are not used after additional annotative scales are added. I often times have a drawing set at 1:10 or 1:20 scale and need to do an enlarged detail at 1:5.
What I would like to do is have this block set at 1:10 scale and 1:5 scale and manually rotate it (ideally using the dynamic features) at different angles for each scale. Is this possible and if so, why is it not working with this block? This works flawlessly when using annotative multileaders, so why shouldn't it work with blocks or is this just too labor intensive for the software?
I have also tried attsync, etc. and often times when rotating at different annotative scales, the text attributes go "bonkers" for the opposing scale when applying attsync.
I have a block that has to be update in a bunch of drawings -more than 20-. I updated in only one drawing, apply coy paste to the following but the block does not update in the drawing that I am pasting my new block. How is possible to update this block in the following 19 drawings?
I'm working on a program that cycles through each paperspace layout in a drawing and updates the sheet number and total quantity of sheets in the titleblock attributes. I've updated the block attributes in paperspace before, and it worked fine. Now that I'm trying to cycle through each layout, I cannot get it to work. I have attached my code. I beleive it starts to cycle through the layouts, but it fails when I try to grab the attribute collection.
Public Sub UpdateSheetNumbers() Dim doc As Document = Application.DocumentManager.MdiActiveDocument Dim db As Database = doc.Database Dim ed As Editor = doc.Editor Dim layoutCount As Integer =
I've made a block with fields linked to attributes (so when I change the value of the "master" attribute, the field values will change).
*NOTE* the fields are contained within a piece of MTEXT and NOT within another attribute.
The fields will not read the "value" of the attributes they are connected to, unless I explode the block (and change the DEFAULT value), or use regular text instead of attributes.
FIELDEVAL - set to 31
UPDATEFIELD - returns: "2 fields found, 2 fields updated" but it doesn't actually update them.
Regen/Regenall/Save - does nothing
BATTMAN - SYNC - does nothing
Lastly, I noticed that if I use "loose" text outside the block, but still link the fields (that are inside the block) to that text, they will update when I change the text contents after regen. AutoCAD is just having trouble using fields+attributes.
I have the below code (from a user here on the forum) which works great for aligning text, mtext and blocks to 2 points. For annotative entities, it respects the rotation angle for mtext and text.
ie I have an mtext object at 1"=20' scale and at 1"=40' scale. I run the command when the current annotative scale is 1"=40'. The object at 40' scale has changed, but the 20' scale is unchanged. This is working as I would like it to.
But for annotative blocks, it gets weirded out. In the above example, the block at 40' will rotate, but so will the attributes at 20' scale. But linework and hatching at 20' scale will be unchanged. it looks really weird. how to get it to play nice with blocks. Ideally, I'd like the block to be at different rotation angles in different annotative scales.
(defun C:R2P (/ ss ang edata); = Rotate objects to align with 2 Points (setq ss (ssget '((0 . "*TEXT,INSERT"))) ang (angle (getpoint " First alignment point: ") (getpoint " Second alignment point: ")) ) (repeat (sslength ss) (setq edata (entget (ssname ss 0))) (entmod (subst (cons 50 ang) (assoc 50 edata) edata)) (ssdel (ssname ss 0) ss) ))
