AutoCAD Architecture :: Can't Delete Tool Palette Group
Oct 10, 2011
I have set the properties in Content Browser for New Project 2012 (our template for new projects) under Tool Palettes for shared workspace catalog; tool palette group is pointing to Workspace Catalog on a shared drive; tool content root path is pointing to a Projects folder called New Project 2012.
When I open the project New Project 2012 the tool palettes come up but with a Tool Palette Group called New Project 2012 with all the tool palettes listed under it. I right clicked and made the Design group the current group and selected Customize Palettes. I can see under Palette Groups - New Project 2012. I right clicked and selected delete and it's gone but when I go out of the project and go back in, the group New Project 2012 is there. Where do I go to delete this group? Where do I tell the Project to have the Design Group be current when opening this Project?
I'm currently going over the Metric tutorial for ACA 2009. At some point, I'm instructed to right-click the tool palette title bar to select the "project-specific" palette (which should be located among the Design, Visalization, etc palettes). Well, this palette is not there.
I´ve checked the project properties and verified that Project Tool Palette Group is set to Shared workspace catalog. The paths are correct (I'm using Windows 7 x64), etc. When I open antoher tutorial project (Steel Framed Residence_m) the project tool palette is there, but when I create any new project or use the one in the tut, this group/palette is not created.
The profile used to create the project is the default:
For some reason, the tool palette I usually use is not accessible. I opened a drawing that a co-worker was using and my tool palette now looks like an old version - it doesn't have any of my custom tools in it. How do I get back my tool palette??
I have created multiple tool palettes that i load depending on whether im working on a rcp plan or a toilet room plan, etc. On the right hand side it says Tool Palettes - All Palettes. How to rename that to say rcp,civil, etc? If I right click on the right side of the tool palette & select rename it renames all tool palettes to whatever I type in. I thought it might be tool palette groups but I am not sure. I can't seem to set one to be current. The selection is grayed out
I've been using the design group in the tool palettes, and adding my own tool palettes as I create them.Today I login and see that my tool palettes is not docked to the left side of the screen anymore.So I push CTRL-3 to bring it back up.The tool palettes that I see there are the "All Palettes" group.
I cannot choose the design group, document group, detailing group, or the visualization group. They are not even selectable in the right click menu of the tool palette bar. But when I customize palettes the 4 groups show up there, but they are useless.And not even all the tool palettes are there. "Design" is missing, Windows, Doors. Any way of getting my palette groups back to the way it was before, other than re-installing autocad?
Just upgraded to 2014. I have a custom tool palette set up and Content Browser pointing to right catalog. Custom tool palette was copied from 2012. I was able to modify all tool properties within that palette to point to right content file but one. Can't change the property in one tool on palette.
Patette is locked (I locked it when I created it in 2012) and I have Right Access to all of the network files in Architecture (this is sitting on a network). Why is it the Tool Palette won't Unlock?
I am running 2011 ACA on Win 7 64bit.Today when I launch the program, the contents of the tool palette are incorrect. None of the "door, wall, spaces ff+e, etc...) are there anymore.
I am new to ACA and was trying to use the massing element from either the build ribbon on home page or design tool palette. I select the icon and then right click the properties box and all the dimension boxes are gray not letting me input data. I cannot find out how to change them to be editable.
I seem to be running into a wall here, I have created an annotative dimension and copied it to the tool palette. When I go to dimension something in a new dwg that does not have the new annotation style, the dimension style does not keep its annotation setting. It brings in the annotation style but not the annotation setting.
I am using the the tool palette to build exterior walls.. I have the wall as needed finished except for a limestine sill. It is bull nosed and contoured. How do I put the profile in the wall style so it looks correct?
I have an issue where any hatch that I place on a tool palette comes in on the wrong layer. They all come in on the a-hatch-window layer despite the properties of the tool being set to the correct layer and the correct layer being present and being the current layer in the drawing.
We use AA in the office but we have one version of autocad straight on a laptop. How can I get a tool palette we created in AA into autocad? I understand in AA that you use the content browser in AA to export a palette group but then how do you actually get that into Autocad for use? I think autocad uses an atc file or something like that.
Also, when trying to export the tool palette in AA using the content browser, the help file said I should be able to grab the tool palette and slide/ copy it into the new cataloque I created in the content browser. However, eveytime I grab onto the tool palette, the content browser woudl disappear. I finally just selected all of the items in my tool palatte and copied/ pasted them into the category folder I created within the new catalogue.
Unfortunately, a new project we have does not allow us to use annotative objects, so we are back to switching scale by creating several dimstyles with a varying dimscale (eg. Dim96, for 1/8", Dim48 for 1/4" etc.) Now I have created a button on the tool palette that brings in text and it allows me to set the size of the arrow by matching it to the dimstyle, but the text comes in always at the same size - 9" which is 3/32" for a 1/8" plan. The arrow changes but the text does not. I know I have to change the CANNOSCALE, but I can't seem to figure out a way of making it work so that the user will only need to switch the dimstyle from the pull down up at the top right and then be able to use a tool palette button that will bring in a text with leader with it's arrow head and text height matching the dimstyle scale.
I've been using Revit a lot more and dont remember a lot about ADT and AutoCAD Architecture.
I've been getting reacquainted with creating sheet templates and smart tags for a project I'm working on. I have the Sheet creating okay but when I placed a view on the sheet and tried to tag it with the default view title from the call out tool palate all I get is the name of the view and placeholders for the view number and view scale. It says "View Number" and "viewport scale." From what I remember it should at least give me question marks if its linking but it doesn't look like its making any connections.
I'm writing code that able user to show my custom palette.
Everything is working fine, but ... I want to make some of my groupbox to be expandable/collapsible, like here (3D visualization):
[URL]
I think that using groupbox control is bad idea, so how can I make some container with my controls (label and textbox) and make this container expandable/collapsible?
I have a group called "grey button" with a text layer ("ok, got it") and a shape layer ("large grey") within in it. Sometimes the two elements within the group show up in the layers palette, sometimes they don't. Sometimes when I click the drop down for the group folder, it looks to be open but nothing shows beneath it. Sometimes when I can get the items within the group folder to show beneath the folder, then close the dropdown, the folder looks closed but the elements are still showing beneath it.
The Photoshop CS6 Info Palette is not showing before and after in Grouped Adjustment Layers. It only shows the after values on both sides of the Palette.
The two macs with this problem are:
Mac Pro 2 x 2.93 Ghz 6-Core intel Xeon 96 GB 1333 HZ DDR3 ECC ATI Radeon HD 5770 1024 MB OSX Lion 10.7.5
The two macs that work correctly are:
Mac Pro 2 x 3.06 Ghz 6-Core Intel Xeon 96 GB 1333 HZ DDR3 ECC ATI Radeon HD 5870 1024 MB OSX Lion 10.7.5
AutoCAD Architecture 2009 - Something new started today!!! Working in either design or construction workspace the Properties tool bar will not operate. When I select an object and roll over to the Properties Pallette it simply starts to blink and does not open. Also, the Quick Properties panel will not open. Background, the new file I am working on was last saved on my laptop and transfered via a thumb drive. I have done this often with out a problem. However, the laptop is a new one with Windows 7 and my desktop has Windows XP.
I'm having a problem with my properties window or floating palette. When I select an object, such as a "line", my properties palette refreshes itself for about 3 seconds. When I hit esc, or deselect the line, it takes another 3 seconds to refresh itself. You can even see the properties palette start at the top and go blank as it travels downward. Very slow process, I can not get anything done. IF I close my properties palette, it does not have the delay, but I can not work without it. When I reboot, it works fine for about 5-6 selections, then jams back up.
ACA 2012 sp1 with Win 7 Pro 64bit sp1 Intel i7 hex 3.0 16 gb ram Nvidia Quadro 4000
i got one problem with properties palette. that is when i select line in the drawing, it display no selection in the properties palette. but display other objects except lines.
We are trying to create a set of palettes for a building type that we specialize in. How do we add the spaces to a design palette and can we include a room tag with it?
I like to have all my palettes docked, however, the Properties Palette won't stay docked after closing and reopening AutoCAD. Every time I open AutoCAD, the Properties Palette reverts to its undocked status (all other docked palettes stay put). Is there any way to remedy this? It's a pain to have to redock it every time I open the program.
I am trying to make a custom palette for structural members. "Then, temporarily deactivate the link and change the dimension properties of the tool to 4 x 4 x 4 meters. Next, copy the tool back to the Content Browser. The Content Browser catalog is updated with the new tool properties. Finally, reactivate the link from the Content Browser tool to the AutoCAD Architecture palette."
I am attempting to use the Weld symbols routine from the detail palette. All the symbols are being created an enormous size. how to reduce this insert scale.
