AutoCAD 2010 :: Tool Palette - Group Names?
May 12, 2012
I have created multiple tool palettes that i load depending on whether im working on a rcp plan or a toilet room plan, etc. On the right hand side it says Tool Palettes - All Palettes. How to rename that to say rcp,civil, etc? If I right click on the right side of the tool palette & select rename it renames all tool palettes to whatever I type in. I thought it might be tool palette groups but I am not sure. I can't seem to set one to be current. The selection is grayed out
View 3 Replies
ADVERTISEMENT
Nov 12, 2012
I want to create a new Tool Palette Group. How can I do?
View 6 Replies
View Related
Oct 10, 2011
I have set the properties in Content Browser for New Project 2012 (our template for new projects) under Tool Palettes for shared workspace catalog; tool palette group is pointing to Workspace Catalog on a shared drive; tool content root path is pointing to a Projects folder called New Project 2012.
When I open the project New Project 2012 the tool palettes come up but with a Tool Palette Group called New Project 2012 with all the tool palettes listed under it. I right clicked and made the Design group the current group and selected Customize Palettes. I can see under Palette Groups - New Project 2012. I right clicked and selected delete and it's gone but when I go out of the project and go back in, the group New Project 2012 is there. Where do I go to delete this group? Where do I tell the Project to have the Design Group be current when opening this Project?
View 3 Replies
View Related
Mar 22, 2011
I'm currently going over the Metric tutorial for ACA 2009. At some point, I'm instructed to right-click the tool palette title bar to select the "project-specific" palette (which should be located among the Design, Visalization, etc palettes). Well, this palette is not there.
I´ve checked the project properties and verified that Project Tool Palette Group is set to Shared workspace catalog. The paths are correct (I'm using Windows 7 x64), etc. When I open antoher tutorial project (Steel Framed Residence_m) the project tool palette is there, but when I create any new project or use the one in the tut, this group/palette is not created.
The profile used to create the project is the default:
C:ProgramDataAutodeskACD-A 2009enuTemplateTemplate Project (Metric)Template Project (Metric).apj
View 1 Replies
View Related
Jan 16, 2012
We use autocad 2011 and we are trying to create a new tool palette. We have no problem dragging and dropping to our existing tool palettes, but we can not drop to anything new we create. We do not have any read/write issues. I have tried saving workspace, restarting CAD just erases the palette i tried to create.
View 2 Replies
View Related
Nov 7, 2012
I have created our tool palettes that reside on our network. I am setting up a laptop workstation, and use the same tool palettes. The issue is the laptop tool palettes will reside on the C:/ drive, which is not our network drive. Is there an easy way to switch drives without changing each item, on each tool palette?
I have the same directory tree on the laptops C:/ drive, the only exception is the drive letter.
View 1 Replies
View Related
May 4, 2012
I use this palette all the time and keep the icon displayed (in hidden form) on every session that I open. I started AutoCad this morning and "external reference" icon was not displayed on the screen. I went to the tools tab and selected the external reference palette. A box was displayed that could not be hidden and all screen function were stopped until I closed this box.
I went to customize tool palettes and compared it to the properties palette and they looked the same. I want to get my external reference palette function back to the way it was.
View 1 Replies
View Related
Feb 14, 2012
I'm trying to save blocks to a new tool palette and it won't let me.
I'm doing everything I've always done. Right click on the tool palette, click "new palette" then change the name.
the new tab appears on the tool palette. I go then to drag the block from my drawing to the newly made palette.
As I drag over the tool palette with block, the black line appears on the palette as it should, but when I drop it to the palette its not there. I can drag and drop that same block to any of the other tabs on the tool palette whether it's a default one or one that I've made previously. I've done this process a thousand times, it always worked without a problem. All of a sudden it doesn't. I havent made any changes to my pc or os except for the microsoft updates.
I've also tried to load the blocks from design center to the new palette, no success!
I've checked to make sure tool palettes are saving to the right file....
C:Documents and Settingsuser nameApplication DataAutodeskAutoCAD 2011R18.1enusupportTool PalettePalettes
and they are not read only!
I'm running Windows XP Pro, never had any issues until now.
Is there an patch or update to fix this
Is there something I'm missing
It's very frustrating, when you can't work on a project the way your used to
View 9 Replies
View Related
Feb 14, 2013
How do I keep the tool palette from going back to the default after I set it up?
View 2 Replies
View Related
May 15, 2012
I have a section cut that I use from my tool palette that disappears from paperspace. It shows up in model space and everything else I use from my tool palette shows in both model and paperspace. I have all layers on, unfrozen, etc. They are not on my defpoints layer either. It just seems to be that particular block that is disappearing. Its the strangest thing. One day it worked just fine and the next it started doing this.
View 5 Replies
View Related
Oct 17, 2011
I have a problem in Autocad2011model space when I drag blocks from the tool palette they disappear. The block initially appears when I grab it and drag it across the model space. Then when I go to insert it in position on the drawing as per normal it then vanishes. If I insert the same blocks using the 'insert block' method the blocks insert normally.
View 6 Replies
View Related
Aug 9, 2013
How to use a LISP file to create Tool Palette?
View 3 Replies
View Related
Jan 19, 2012
We are having an issue while inserting blocks from the tool palette. Inserting a block from the tool palette takes about 5 seconds per block. Pick a block, wait 5 seconds, pick insertion point. Last week it took maybe 1 second. It doesn't sound like much, but we use alot of blocks everyday, and waiting 5 seconds everytime gets annoying. Especially when it used to be almost instantanious. We also have our blocks in our template. The template is on the server. If you type insert, and insert the block that way, it loads fast, like it used to using the tool palette.
Most of the blocks are simple text or shapes. None are dynamic. We also have some hatches in there, that are unaffected by the delay. They insert quickly.
Another thing has changed. The time it takes to change to a different tab on the palette has grown. A tab with about 10 blocks used to take about 6 seconds to load, now takes a good 30 seconds. And a tab with about 30 blocks that used to take about 12 seconds, now takes about a minute and a half! Once the tool palette and each tab has been opened for the first time, say first thing in the morning when cad is first opened, the delay is gone. They switch betweeen tabs with no delays.
The only thing that I know of that has changed that coincides with this is last week we made a few changes to the template. We removed a few sheets that we no longer use. Could this have done something? The blocks are still in the template. We have 3 pc's that are affected in the same way, at the same time.
I've tried a few things to remedy this. I am by no means a cad guru. I created a .dwg with all the blocks in it. Made another tab on the tool palette using the blocks from the .dwg. Still the same delay. I tried creating a new palette using the design center and the blocks .dwg I made, but cad locks up on me and I have to restart cad. I tried that twice, same result.
We are running AutoCAD Civil 3D 2010 on Vista Business 64bit.
View 5 Replies
View Related
Jan 10, 2013
my tool palette causes a systematic crash at startup .
is there a way to launch without opening toolpalettes .?
View 5 Replies
View Related
Jul 17, 2013
For some reason, the tool palette I usually use is not accessible. I opened a drawing that a co-worker was using and my tool palette now looks like an old version - it doesn't have any of my custom tools in it. How do I get back my tool palette??
View 1 Replies
View Related
Mar 19, 2012
I don't know why but I don't see images of my dynamic blocks at tool palette.
View 6 Replies
View Related
Nov 5, 2013
Whenever I insert a block into my drawing from the Tool Palette, Autocad creates a Text Style and Dimension Style,both named Annotative. This happens on any drawing, with any block.
I can purge them after the block has been inserted. They are NOT nested in the blocks. I have tried recreated the tool. Nothing seems to be working.
View 4 Replies
View Related
May 31, 2013
tool palettes from a directory called ACAD2008 to ACAD2012. Tool palettes can't find the associated blocks because the support path still points to the ACAD200 Directory.
Is there a way to "globally" change the associated path? There are too many blocks to think about changing each one manually.
View 3 Replies
View Related
May 10, 2012
Is there anyway to add a tool palette into a work space using the customize user interface?
View 2 Replies
View Related
Mar 19, 2013
One of my designers running 2012 AutoCAD and 2012 CADWorx, can no longer select individual parts of a GROUP by shift selecting the unwanted elements.
I have tried to modify..
Pickadd
Group
PickStyle
PickAuto
PickDrag
but to no success.
Also fiddled with her Options file, still nothing+
View 6 Replies
View Related
Apr 15, 2013
how to explode group when group name not found
View 1 Replies
View Related
Nov 28, 2012
I'm writing code that able user to show my custom palette.
Everything is working fine, but ... I want to make some of my groupbox to be expandable/collapsible, like here (3D visualization):
[URL]
I think that using groupbox control is bad idea, so how can I make some container with my controls (label and textbox) and make this container expandable/collapsible?
View 3 Replies
View Related
Feb 17, 2012
How to select objects by their group names?
I'm working with imported graphics, and the objects appear in the AI layer hierarchy grouped and named according to their object types in the native program (see the attached image). The problem lies with the annotation objects: they are made of different parts for which different graphic styles are needed; however, they all come in one layer and are difficult to access for global operations. I need to do different things with the different object types (delete the POINT's, move the LINE's and LWPOLYLINE's to different layers, etc...). The option of selecting objects individually is ok for small data sets, but you can imagine this becomes untenable in a hurry.
Two possible solutions I've considered:
(1) change the output parameters in the source program such that the objects come into illustrator with different graphics allowing them to be accessed through the "Select same ..." tools; it would work, but is problematic for the source program
(2) print the annotation graphics with their desired graphic appearance to pdf rather than importing the source file directly in AI, then open in AI to render the remaining graphics; again, this works but introduces inefficiency in the process. Also, the print process tends to explode closed paths requiring more inefficient path tinkering in AI.
I would like to tell AI to select all objects named "POINT" or "LINE" etc... but have found nothing in the documentation or forums on whether this is possible.
View 1 Replies
View Related
Jan 29, 2011
I'm using CorelDRAW X5. When I used version 12 and earlier versions, the color palette displayed on the right side of the screen showed color names. (I think you only saw the name when you selected a color.) Now instead I see only numerical values.
Is there a way to restore color names here? It seems this should be a simple option, like display color values or color names.
View 15 Replies
View Related
Dec 7, 2012
I wan´t to delete a palette from Autocad Tool Palette. How can I do?
View 3 Replies
View Related
Sep 26, 2012
I have both Corel 12 and X5. A few years ago a friend of mine installed a custom color palette in my C12 that was matched to the Federal Standard 595 color system.
When I move the cursor over each color in the palette, it displays the FS number assigned to each color (ie. FS35237, FS37038, etc.)
I recently installed the same color palette into X5. However, when I move the cursor over each color, it displays the RGB color ratios for each color. If I open the palette and click on the 'display names' option, it shows the FS number for each color but reverts back to the RGB ratio when the palette is minimized to the right of my screen (I hope that makes sense).
How can I get the FS numbers to display when I move the cursor over the colors?
View 1 Replies
View Related
Nov 17, 2013
I have a new copy of PSE 11 and the tools menu palette names on the left side of the screen are missing. I notice that some tutorials show the palette names and others do not. How do you turn these names on or off?
View 3 Replies
View Related
Jun 9, 2011
In ACA 2009 I could, after saving the drawing, click on a wall, window etc and drag it to the tool palette to create a new tool.
In ACA 2011 this only works for lines/polylines. Plus the wall, door and window palettes are gone. How can I retreave them?
View 1 Replies
View Related
Aug 21, 2013
I have a group called "grey button" with a text layer ("ok, got it") and a shape layer ("large grey") within in it. Sometimes the two elements within the group show up in the layers palette, sometimes they don't. Sometimes when I click the drop down for the group folder, it looks to be open but nothing shows beneath it. Sometimes when I can get the items within the group folder to show beneath the folder, then close the dropdown, the folder looks closed but the elements are still showing beneath it.
View 5 Replies
View Related
Mar 12, 2013
The Photoshop CS6 Info Palette is not showing before and after in Grouped Adjustment Layers. It only shows the after values on both sides of the Palette.
The two macs with this problem are:
Mac Pro
2 x 2.93 Ghz 6-Core intel Xeon
96 GB 1333 HZ DDR3 ECC
ATI Radeon HD 5770 1024 MB
OSX Lion 10.7.5
The two macs that work correctly are:
Mac Pro
2 x 3.06 Ghz 6-Core Intel Xeon
96 GB 1333 HZ DDR3 ECC
ATI Radeon HD 5870 1024 MB
OSX Lion 10.7.5
View 4 Replies
View Related
Jan 31, 2013
Is it possible to create folders within the tool preset panel to group tool presets, instead of having a long list?
View 2 Replies
View Related
