In ACA 2009 I could, after saving the drawing, click on a wall, window etc and drag it to the tool palette to create a new tool.
In ACA 2011 this only works for lines/polylines. Plus the wall, door and window palettes are gone. How can I retreave them?
For some reason, the tool palette I usually use is not accessible. I opened a drawing that a co-worker was using and my tool palette now looks like an old version - it doesn't have any of my custom tools in it. How do I get back my tool palette??
View 1 Replies View RelatedI did a drawing in ACA2011 sent it to my remote office where I have ACLT for mac 2013 (trial). Worked on the file,
had to explode the couple of walls I was editing, saved as 2011 or 2010 file.
When I open the file in ACA2011 I can not execute the wall tool. This is the message received:
Command: _AecWallAdd Command not allowed because drawing contains objects from a newer version of this application.
The new objects would be lines.
I'm trying to save blocks to a new tool palette and it won't let me.
I'm doing everything I've always done. Right click on the tool palette, click "new palette" then change the name.
the new tab appears on the tool palette. I go then to drag the block from my drawing to the newly made palette.
As I drag over the tool palette with block, the black line appears on the palette as it should, but when I drop it to the palette its not there. I can drag and drop that same block to any of the other tabs on the tool palette whether it's a default one or one that I've made previously. I've done this process a thousand times, it always worked without a problem. All of a sudden it doesn't. I havent made any changes to my pc or os except for the microsoft updates.
I've also tried to load the blocks from design center to the new palette, no success!
I've checked to make sure tool palettes are saving to the right file....
C:Documents and Settingsuser nameApplication DataAutodeskAutoCAD 2011R18.1enusupportTool PalettePalettes
and they are not read only!
I'm running Windows XP Pro, never had any issues until now.
Is there an patch or update to fix this
Is there something I'm missing
It's very frustrating, when you can't work on a project the way your used to
I have a wall tool whose style has a sweep attached, when I added the tool to the palette it drops the sweep. I know this was a wish list item a few years back. Has the feature been added that allows me to add the sweep to the tool so I dont have to manually import and add the sweep in every drawing?
View 2 Replies View RelatedJust upgraded to 2014. I have a custom tool palette set up and Content Browser pointing to right catalog. Custom tool palette was copied from 2012. I was able to modify all tool properties within that palette to point to right content file but one. Can't change the property in one tool on palette.
Patette is locked (I locked it when I created it in 2012) and I have Right Access to all of the network files in Architecture (this is sitting on a network). Why is it the Tool Palette won't Unlock?
I am running 2011 ACA on Win 7 64bit.Today when I launch the program, the contents of the tool palette are incorrect. None of the "door, wall, spaces ff+e, etc...) are there anymore.
View 9 Replies View RelatedI have set the properties in Content Browser for New Project 2012 (our template for new projects) under Tool Palettes for shared workspace catalog; tool palette group is pointing to Workspace Catalog on a shared drive; tool content root path is pointing to a Projects folder called New Project 2012.
When I open the project New Project 2012 the tool palettes come up but with a Tool Palette Group called New Project 2012 with all the tool palettes listed under it. I right clicked and made the Design group the current group and selected Customize Palettes. I can see under Palette Groups - New Project 2012. I right clicked and selected delete and it's gone but when I go out of the project and go back in, the group New Project 2012 is there. Where do I go to delete this group? Where do I tell the Project to have the Design Group be current when opening this Project?
I am new to ACA and was trying to use the massing element from either the build ribbon on home page or design tool palette. I select the icon and then right click the properties box and all the dimension boxes are gray not letting me input data. I cannot find out how to change them to be editable.
View 3 Replies View RelatedI seem to be running into a wall here, I have created an annotative dimension and copied it to the tool palette. When I go to dimension something in a new dwg that does not have the new annotation style, the dimension style does not keep its annotation setting. It brings in the annotation style but not the annotation setting.
View 9 Replies View RelatedI am getting an err message "unable to execute the tool .class not registered" while trying to insert objects from the tool pallette.
View 9 Replies View RelatedI am using the the tool palette to build exterior walls.. I have the wall as needed finished except for a limestine sill. It is bull nosed and contoured. How do I put the profile in the wall style so it looks correct?
View 8 Replies View RelatedI have an issue where any hatch that I place on a tool palette comes in on the wrong layer. They all come in on the a-hatch-window layer despite the properties of the tool being set to the correct layer and the correct layer being present and being the current layer in the drawing.
View 5 Replies View RelatedWe use AA in the office but we have one version of autocad straight on a laptop. How can I get a tool palette we created in AA into autocad? I understand in AA that you use the content browser in AA to export a palette group but then how do you actually get that into Autocad for use? I think autocad uses an atc file or something like that.
Also, when trying to export the tool palette in AA using the content browser, the help file said I should be able to grab the tool palette and slide/ copy it into the new cataloque I created in the content browser. However, eveytime I grab onto the tool palette, the content browser woudl disappear. I finally just selected all of the items in my tool palatte and copied/ pasted them into the category folder I created within the new catalogue.
Unfortunately, a new project we have does not allow us to use annotative objects, so we are back to switching scale by creating several dimstyles with a varying dimscale (eg. Dim96, for 1/8", Dim48 for 1/4" etc.) Now I have created a button on the tool palette that brings in text and it allows me to set the size of the arrow by matching it to the dimstyle, but the text comes in always at the same size - 9" which is 3/32" for a 1/8" plan. The arrow changes but the text does not. I know I have to change the CANNOSCALE, but I can't seem to figure out a way of making it work so that the user will only need to switch the dimstyle from the pull down up at the top right and then be able to use a tool palette button that will bring in a text with leader with it's arrow head and text height matching the dimstyle scale.
View 4 Replies View RelatedI've been using Revit a lot more and dont remember a lot about ADT and AutoCAD Architecture.
I've been getting reacquainted with creating sheet templates and smart tags for a project I'm working on. I have the Sheet creating okay but when I placed a view on the sheet and tried to tag it with the default view title from the call out tool palate all I get is the name of the view and placeholders for the view number and view scale. It says "View Number" and "viewport scale." From what I remember it should at least give me question marks if its linking but it doesn't look like its making any connections.
I'm currently going over the Metric tutorial for ACA 2009. At some point, I'm instructed to right-click the tool palette title bar to select the "project-specific" palette (which should be located among the Design, Visalization, etc palettes). Well, this palette is not there.
I´ve checked the project properties and verified that Project Tool Palette Group is set to Shared workspace catalog. The paths are correct (I'm using Windows 7 x64), etc. When I open antoher tutorial project (Steel Framed Residence_m) the project tool palette is there, but when I create any new project or use the one in the tut, this group/palette is not created.
The profile used to create the project is the default:
C:ProgramDataAutodeskACD-A 2009enuTemplateTemplate Project (Metric)Template Project (Metric).apj
I wan´t to delete a palette from Autocad Tool Palette. How can I do?
View 3 Replies View RelatedI'm trying to create a Tool Palette for Autocad 2000 from VB.Net.
View 5 Replies View RelatedMy question has to do with the Annotation Tool Palette out-of-the-box. For a given scale, the Call out bubble circle and text is a different size from the Section call out. See attached image.
View 2 Replies View RelatedHow to the fix the little buttons (icons) on the tool palette(s)?
Sometimes, by mistake, I drag an (or many) icon(s) to another place. I work with autocad 2010.
I am using AutoCAD 2011. Because when I typically draw a circle I use the center, diameter style to create a circle. The factory default is Center, Radius. I would like to make the center, diameter my default setting whenever I chose to draw a circle. I would like to know how to make that change then how do I get it onto a custom tool palette?
View 5 Replies View RelatedI am trying to add a block to my tool palette. I am able to add it, but when I click on the palette to add it to a drawing, it acts like it's going to work but nothing shows up in the drawing. I have added it to the source drawing, saved the source drawing, dragged it into the palette. All is well until I try to place it in a drawing. The other blocks work fine.
View 9 Replies View RelatedIs there a way to create more than one tool palette in AutoCAD instead of just adding tabs onto an existing tool palette?
View 1 Replies View RelatedI heard tool palettes are easy to create and use? I am being able to drop in doors and windows into plans. Is there an easy way to create these tool palettes?
View 2 Replies View RelatedWe use autocad 2011 and we are trying to create a new tool palette. We have no problem dragging and dropping to our existing tool palettes, but we can not drop to anything new we create. We do not have any read/write issues. I have tried saving workspace, restarting CAD just erases the palette i tried to create.
View 2 Replies View RelatedIs there any option to load the dll on every drawing opened, like vba macro is loaded in start up suite. or is there any possibility to open a tool palette on every drawing opened.
View 2 Replies View RelatedI am using autocad lt 2014 and have some multi leaders on a tool palette that work fine but if I hit enter or right click for enter the multi leader will use what ever leader is set from the multi leader style that is set on the multi leader style control, but only the leader will come in wrong the text will come in correct.
View 6 Replies View RelatedI want to create a new Tool Palette Group. How can I do?
View 6 Replies View RelatedQuite often when I open drawings or just open AutoCAD my tool palete is there but none of the tools are there to select from? If I reset the tool palette it does the same. Sometimes they are there and sometimes they are not?? I have tried uninstalling and reinstalling but it still happens. I'm using AutoCAD LT 2013 for Mac. Screen shot attached.
View 1 Replies View RelatedI have created one drawing with 10 Layouts in different formats(A1,A0...etc) and with different Legends on it. I need to give these layouts to lot of users, where everyone uses one layout out of 10 in their drawing. Is there any way to add them in tool palette like dynamic blocks? or is it possible to add thme as a ribbon in the dwg template?
View 3 Replies View Related
