I am trying to add a block to my tool palette. I am able to add it, but when I click on the palette to add it to a drawing, it acts like it's going to work but nothing shows up in the drawing. I have added it to the source drawing, saved the source drawing, dragged it into the palette. All is well until I try to place it in a drawing. The other blocks work fine.
View 9 RepliesI'm trying to insert a block, wich contains 2 nested blocks:
1 dynamic block
1 annotive block which has a scale 1:200 with an attribute.
when i'm inserting it trough the toolpalette, and my annoscale is 1:100, the annotive block is converted to the annotive scale 1:100, instead of the 1:200 wich it originally is.
I can't set the annotationscale in the toolpallete, exept when i use macro's. but this also has a drawback.
when i'm inserting the block with a macro, i have to insert a complete drawing wich contains only this one block.This block contains dynamic parameters (i can't add dynamic parameters outside of the blockeditor)
When this block (dwg) is inserted, i explode the block so it becomes the dynamic block again. but the block cannot be redefined, because the actual inserted block is a dwg file.
Is it a drawback of the use of the toolpalette and dynamic / annotive blocks?
I have a tool palette with our typical symbols which are blocks. All the blocks on the tool palette shows correct and the proerties of the blocks are correct but when I decide to drag a block in from the tool palette, no matter which block of 30, the same block inserts. How do I get the palette to insert the correct block.Using ARCH 2013, 64-bit, windows 7.
View 9 Replies View RelatedWe are having an issue while inserting blocks from the tool palette. Inserting a block from the tool palette takes about 5 seconds per block. Pick a block, wait 5 seconds, pick insertion point. Last week it took maybe 1 second. It doesn't sound like much, but we use alot of blocks everyday, and waiting 5 seconds every time gets annoying. Especially when it used to be almost instantaneous. We also have our blocks in our template. The template is on the server. If you type insert, and insert the block that way, it loads fast, like it used to using the tool palette.
Most of the blocks are simple text or shapes. None are dynamic. We also have some hatches in there, that are unaffected by the delay. They insert quickly.
Another thing has changed. The time it takes to change to a different tab on the palette has grown. A tab with about 10 blocks used to take about 6 seconds to load, now takes a good 30 seconds. And a tab with about 30 blocks that used to take about 12 seconds, now takes about a minute and a half! Once the tool palette and each tab has been opened for the first time, say first thing in the morning when cad is first opened, the delay is gone. They switch between tabs with no delays.
The only thing that I know of that has changed that coincides with this is last week we made a few changes to the template. We removed a few sheets that we no longer use. Could this have done something? The blocks are still in the template. We have 3 pc's that are affected in the same way, at the same time.
I've tried a few things to remedy this. I am by no means a cad guru. I created a .dwg with all the blocks in it. Made another tab on the tool palette using the blocks from the .dwg. Still the same delay. I tried creating a new palette using the design center and the blocks .dwg I made, but cad locks up on me and I have to restart cad. I tried that twice.
We are having an issue while inserting blocks from the tool palette. Inserting a block from the tool palette takes about 5 seconds per block. Pick a block, wait 5 seconds, pick insertion point. Last week it took maybe 1 second. It doesn't sound like much, but we use alot of blocks everyday, and waiting 5 seconds everytime gets annoying. Especially when it used to be almost instantanious. We also have our blocks in our template. The template is on the server. If you type insert, and insert the block that way, it loads fast, like it used to using the tool palette.
Most of the blocks are simple text or shapes. None are dynamic. We also have some hatches in there, that are unaffected by the delay. They insert quickly.
Another thing has changed. The time it takes to change to a different tab on the palette has grown. A tab with about 10 blocks used to take about 6 seconds to load, now takes a good 30 seconds. And a tab with about 30 blocks that used to take about 12 seconds, now takes about a minute and a half! Once the tool palette and each tab has been opened for the first time, say first thing in the morning when cad is first opened, the delay is gone. They switch betweeen tabs with no delays.
The only thing that I know of that has changed that coincides with this is last week we made a few changes to the template. We removed a few sheets that we no longer use. Could this have done something? The blocks are still in the template. We have 3 pc's that are affected in the same way, at the same time.
I've tried a few things to remedy this. I am by no means a cad guru. I created a .dwg with all the blocks in it. Made another tab on the tool palette using the blocks from the .dwg. Still the same delay. I tried creating a new palette using the design center and the blocks .dwg I made, but cad locks up on me and I have to restart cad. I tried that twice, same result.
We are running AutoCAD Civil 3D 2010 on Vista Business 64bit.
Is there a short cout to getting to the source drawing file containing block data? Drilling down into the Program Files folder is tedious in the heat of getting drawings done.
View 2 Replies View RelatedI don't know why but I don't see images of my dynamic blocks at tool palette.
View 6 Replies View RelatedI am currently using Autocad 2014 and I am attempting to insert a dynamic block from a tool palette. I would like to click on a dynamic block in the tool palette and have it prompt for the (uniform) scale. It seems simple enough but either all the dynamic properties are lost or it is inserted at 1"x1" (the scale of my original block). How to get this to work?
View 3 Replies View RelatedSince AutoCAD 2013, I'm not able to use tracking when inserting block from tool palette. Example, I want to insert a door at 6 inches from a wall. I click the door from the tool palette, leave a tracking point at the wall corner, move the cursor in the right direction and type 6 follow by enter. The door is insert randomly in the drawing. It was working perfectly in previous release.
Actually I had to insert the door anywhere in the drawing and moving it at the right place and rotate it if required, it is very tedious.
Whenever I insert a block into my drawing from the Tool Palette, Autocad creates a Text Style and Dimension Style,both named Annotative. This happens on any drawing, with any block.
I can purge them after the block has been inserted. They are NOT nested in the blocks. I have tried recreated the tool. Nothing seems to be working.
tool palettes from a directory called ACAD2008 to ACAD2012. Tool palettes can't find the associated blocks because the support path still points to the ACAD200 Directory.
Is there a way to "globally" change the associated path? There are too many blocks to think about changing each one manually.
It's been too long since I created one of these for Toolbars. I need a macro that will insert and explode a block. I just need the block's content, not the block itself. I can create a maco to explode a block with no path, but can't remember how to include the "*" in a file with a folder path to explode the block while its being inserted. Because of spaces in the file name, quotes (") must be around the path.
View 1 Replies View RelatedFor some reason, the tool palette I usually use is not accessible. I opened a drawing that a co-worker was using and my tool palette now looks like an old version - it doesn't have any of my custom tools in it. How do I get back my tool palette??
View 1 Replies View RelatedI wan´t to delete a palette from Autocad Tool Palette. How can I do?
View 3 Replies View RelatedIn ACA 2009 I could, after saving the drawing, click on a wall, window etc and drag it to the tool palette to create a new tool.
In ACA 2011 this only works for lines/polylines. Plus the wall, door and window palettes are gone. How can I retreave them?
Where is Block Authoring Palette in 2013?
I want to make dynamic block...
But i couldnt find Block Authoring Palette to parameters...Actions....
I am using AutoCAD 2013 for Mac as students lisence.
I am creating dynamic blocks but having a hard time adding them to a pallette correctly. In my block folders from which I create my pallettes all the blocks there are separate exploded drawings which ACAD turns into a block when you input them into your drawing via a pallette. The trouble is that when I save my dynamic blocks in this folder I'm saving it as an already blocked drawing, I assume this is the problem as I have to explode it each time I insert it. Is there way to avoid having to explode each time I insert?
View 3 Replies View RelatedI have ACA 2011 on 64 bit Windows 7. I can't seem to find the block authoring palette anywhere..
View 2 Replies View RelatedI'm trying to create a Tool Palette for Autocad 2000 from VB.Net.
View 5 Replies View RelatedMy question has to do with the Annotation Tool Palette out-of-the-box. For a given scale, the Call out bubble circle and text is a different size from the Section call out. See attached image.
View 2 Replies View RelatedHow to the fix the little buttons (icons) on the tool palette(s)?
Sometimes, by mistake, I drag an (or many) icon(s) to another place. I work with autocad 2010.
I am using AutoCAD 2011. Because when I typically draw a circle I use the center, diameter style to create a circle. The factory default is Center, Radius. I would like to make the center, diameter my default setting whenever I chose to draw a circle. I would like to know how to make that change then how do I get it onto a custom tool palette?
View 5 Replies View RelatedIs there a way to create more than one tool palette in AutoCAD instead of just adding tabs onto an existing tool palette?
View 1 Replies View RelatedI heard tool palettes are easy to create and use? I am being able to drop in doors and windows into plans. Is there an easy way to create these tool palettes?
View 2 Replies View RelatedWe use autocad 2011 and we are trying to create a new tool palette. We have no problem dragging and dropping to our existing tool palettes, but we can not drop to anything new we create. We do not have any read/write issues. I have tried saving workspace, restarting CAD just erases the palette i tried to create.
View 2 Replies View RelatedIs there any option to load the dll on every drawing opened, like vba macro is loaded in start up suite. or is there any possibility to open a tool palette on every drawing opened.
View 2 Replies View RelatedI am using autocad lt 2014 and have some multi leaders on a tool palette that work fine but if I hit enter or right click for enter the multi leader will use what ever leader is set from the multi leader style that is set on the multi leader style control, but only the leader will come in wrong the text will come in correct.
View 6 Replies View RelatedI want to create a new Tool Palette Group. How can I do?
View 6 Replies View RelatedQuite often when I open drawings or just open AutoCAD my tool palete is there but none of the tools are there to select from? If I reset the tool palette it does the same. Sometimes they are there and sometimes they are not?? I have tried uninstalling and reinstalling but it still happens. I'm using AutoCAD LT 2013 for Mac. Screen shot attached.
View 1 Replies View RelatedI have created one drawing with 10 Layouts in different formats(A1,A0...etc) and with different Legends on it. I need to give these layouts to lot of users, where everyone uses one layout out of 10 in their drawing. Is there any way to add them in tool palette like dynamic blocks? or is it possible to add thme as a ribbon in the dwg template?
View 3 Replies View RelatedI am trying to create a pallette , where I can use routinely used small symbols(saved as drawings) for insertion into a drawing.
I've created a pallette but unsure how to get my symbols into the pallette.