AutoCAD Architecture :: Viewport Goes Blank After Dragging View In Sheet
May 10, 2012
Since I installed autocad architecture 2012 I have this problem. When I drag a view from the project navigator in a sheet I see the content and the option to set a scale. So far so good. When I click in the sheet to set the location the viewport goes empty. I can stretch the viewport to top left to get the drawing within range and then move it back to where I want to place the drawing.
View 5 Replies
ADVERTISEMENT
Sep 21, 2011
I have never gotten this to work, but had put little effort into it until recently. Thus far I have checked my project standards to make sure "match sheet views to view" is checked to "yes".
In both View drawing and the sheet- VISRETAIN is set to 1.
the VPLAYEROVERRIDESMODE is set to 1
I am working on drawings that are in my current project through project navigator. I am using ACA 2010 and not sure what else I need to do. I turn off all the unwanted layers in the view drawing, then create a sheet and xref in the view to model space- all the layers reset, and I again have to turn off all the unwanted layers. If I change a layer color in the view drawing, it does not change in the sheet drawing upon save and refresh.
I hate wasting time repeating the same task over and over....
View 2 Replies
View Related
Aug 11, 2012
How can I get dimensions and stair well in view to show in sheet view? Basement & 1st fl are ok but 2nd floor is not.
See attached screen shot.
View 2 Replies
View Related
Jun 16, 2011
I am using ACA 2012 and when I insert a view into a sheet, the text and dimensions in the view do not display. I have checked the view and the text and dimensions are on layers that should display in the sheet. The layers are on and thawed in the viewport on the sheet, but do not show up. I have turned on all layers and only the model (building information) shows, no text or dimensions.
View 2 Replies
View Related
Sep 25, 2013
ACA 2011
Whenever I want to pan I get the 'hand'. I click and drag...no prob. However, I want to do a controled pan (to fix a moved elevation in a viewport on a sheet). I want to click a point, and then pan, say, 50' orthogonally. Is this possible?
View 1 Replies
View Related
Dec 18, 2013
When I pick rendered for my shadeplot on a viewport, none of the materials applied to multi-view blocks show up. Is this common or is there a fix?
View 3 Replies
View Related
Aug 8, 2012
How can I remove a view from a sheet the only option seems to be rename and renumber in version 2012?
View 3 Replies
View Related
Jun 11, 2013
When I create a model space view; then drag it on the sheet; shouldn't they be linked? I mean if I go into the View drawing, move the drawing in question, then update the model space view, shouldn't that update the sheet view automatically? Theoretically speaking of course; we are talking AutoCad.
View 2 Replies
View Related
Jul 9, 2012
We have had a reoccuring problem in autocad architecture 2012 where model space views can no longer be dragged into a sheet. It just shows a circular cancel icon.
The sheets are set up fine and it may even have several MSVs already in place then out of no where the ability is lost. We have tried allt he usual fixes (checked the layers, restored the .bak file, tried on other computers, installed service packs) but it seems once the file is "poisoned" the only fix is to recreate the sheet and delete the old one. Not a terrible solution but it is not efficient.
We have a dozen computers all with acad architecture 2012 and it seems to happen on random computers and we can't pinpoint any specific differences between them.
We did not have this problem with Autocad architecture 2009.
It could be something with the project database.
View 2 Replies
View Related
Oct 27, 2011
We're testing some new machines running Windows 7 64-bit with both AutoCAD Architecture 2011 and 2012 64-bit installed.
When dragging and dropping a model space view onto a sheet, instead of the folder with paperclip symbol, we're getting a circle with a line through it prohibited symbol. This only occurs when our project files are on our network. When we use them on a local machine this does not occur.
We cannot drag and drop onto new sheets either.
[URL]
We are running on a Novell Linux Open Enterprise Server network. We previously had a problem with not being able to open any sheets if another drawing was open, which we resolved by disabling Novell File Caching. We are also now experiencing unhandled e06d7363h exception errors with any type of file access in the Project Navigator. This crashing also does not occur when the files are on the local machine.
View 5 Replies
View Related
Jun 15, 2011
Often when I attempt to insert a sheet list from the project navigator to a sheet, nothing happens. The sheet index will not insert. Why does this happen? Better yet, how can I fix it?
View 2 Replies
View Related
May 21, 2013
simple project, 2 story house, 4 generated elevations, file size 600k. ACA is very slow (+4min) to almost freezing up when trying to drag a view from the view drawing into a sheet. xml files match the drawing file. only way to get the views to drop into sheets is copy the traced over views into a clean non-generated elevation view drawing and create the model space views from there.
View 2 Replies
View Related
Jun 29, 2012
I am using MAP3D 2013 and trying to create a raster image file for use in anther document (the document will not accept a dwg or dwf file, only a raster image).
When I use the JPGOUT (or PNGOUT or BMPOUT or TIFOUT) command I can select all of the objects and viewport; there is no problem creating the file. But when I open up the raster image, only the viewport outline and objects in paperspace have come accross; the viewport appears empty.
In MAP, the viewport is turned on and I can see everything as intended.
View 1 Replies
View Related
Sep 26, 2012
I cannot get this feature of 2013 to work for me. When I grab a selected item and drag it to the new drawing window, I get at round circle with a line through it or sometimes I get a command that says invalid.
View 3 Replies
View Related
Jun 15, 2009
When I publish my sheet to PDF, dimensions of my sheet is broken.
View 9 Replies
View Related
Apr 8, 2013
Using ACAD 2008, I am having an odd problem where when I print preview/plot this drawing with a viewport the result is a blank page but when I remove the viewport it plots fine.
View 0 Replies
View Related
Feb 10, 2013
I'm fairly new to Autocad and getting used to using sheet set manager. What I'm experiencing is, when you insert a model view it brings in an xref of that model, but i'm then unsure how to add additional xref models into the same view.
For example I have a separate ground floor plan file and OS data file which I want to show in the one sheet view without nesting the OS data to the original ground floor file.
View 7 Replies
View Related
May 16, 2012
i have a template, created a viewport and fit the model view in the layout space. However, when i scale the template... the viewport model doesn't follows the layout scale. Is there any ways to fit it so that when i scale the template i don't have to set the view again.
View 8 Replies
View Related
Feb 16, 2012
I have a project with a sheet set (both created in C3D 2012) that was working fine up until a couple of days ago. Now, when I open the sheet set, there is nothing there. And any sheet set I open is blank.
Civil 3D 2012 (current SPs) 64x
Windows 7 Ultimate 64x
8GB RAM
Civil 3D 2012
Win 7 Ultimate x64
Intel Core 2 3.2Ghz - 12MB RAM
Nvidia 8500GT Dual DVI
View 3 Replies
View Related
May 14, 2013
Let’s say you have a large building plan in model space but there is only one small area of the building that the view port is looking at. Is there a way that you can draw around that viewport and then take that into model space and paste it in the same place so now you have the same area located in both views?
At the moment I need to try and work out where the view is by drawing a rectangle around the correct area of the building and this is time consuming.
I could then trim/delete everything else outside that box.
View 4 Replies
View Related
Apr 6, 2012
I have a user who opens his drawings from 2012 in 2013 and they show the sheet set manager blank. He goes back to the 2012 seat and the sheet set manager displays the dwgs.
View 1 Replies
View Related
Mar 11, 2013
A blank sheet automatically opens along with an exisitng DWG file opening. How do I stop autocad from adding a blank sheet into an existing file opening and closing ???
View 1 Replies
View Related
Jun 21, 2013
Is there a way to get sheet number of the base view for the Selected Child view (Mainly for Section. Detail Views). Because the Section views, Detail views (initially they would have created on the same sheet where the parent is, then they moved to different sheets). So we place the parent view sheet number.
View 1 Replies
View Related
Jun 15, 2011
I am running CAD Map 3D 2011 and a Windows XP SP3 machine with 4GB RAM and a 128 MB 3D card. I am trying to send the plot to a HP Designjet 800PS plotter.
The file that I am working on is not overly large and has no raster images or OLE objects attached. It does have several open database connections that I am using to theme one of my drawing layers. The sheet itself is an odd size (36" x 54"), but I have printed other drawings of this size before and I've never had problems.
When I first plotted the sheet, it was taking forever to spool, so I ended up canceling the print several times. I finally decided to try to plot to PDF, but this created a HUGE spool file (2.65 GB). Since it was actually spooling, I went ahead and let it run. It ended up taking about an hour to spool and print the PDF. Before I opened the PDF, I checked the size and found it to be about 12 Mb. When I opened it, all that was there was a blank sheet. After that, I re-sent the plot to the HP plotter and just let it work overnight. When I got in this morning, there was a 36" x 54" blank sheet waiting for me.
I've checked the basic settings and none of the layers are frozen, off, or set to not print. I also increased by page file size to work with the plot, but that does not seem to have had any effect. I've tried creating several different .pc3 files, but the issue has stayed. I am now trying to have another person open the file and print it from a different workstation, but so far no luck.
As a side note, I tried a work around by plotting to a dwf file using the included dwf driver. This spooled and plotted very quickly (<60 seconds) and the dwf file appears just fine in design review. However, when I try to print from design review, it won't let me set it as a 36" x 54" plot; it keeps with with the standard print sizes only.
View 1 Replies
View Related
Feb 7, 2014
Recently I downloaded 3ds Max 2014 trial from autodesk. It worked without any problems for a week. It all started when I updated my Nvidia 630M with a WHQL certified graphics driver. When I opened Max after the driver update it closed with an application error which said that, an error has occurred and the application will now close.
Made a complete uninstall of max, plugins and graphics driver. But it had the same problem. Now it opens after a product update. But viewport is completly white. If I open any file it crashes. Tried changing the viewport renderer from Nitrous to Direct 3d and Open GL. But it doesn't even start and gives the same application error. It all happens only if I opened max with graphics card both with the old and the newer driver. It works fine with the integrated graphics.
dxdiag works fine and the report says that there are no problems.
Core i5-3210M @ 2.5 GHz
Windows 7 Ultimate 64bit sp1
4GB RAM
1GB Nvidia GT630M
View 3 Replies
View Related
Jun 23, 2013
In the AutoCAD layout, the View port cannot always be linked to the drawing view. How will the viewport is linked to the drawing view.
View 1 Replies
View Related
Aug 21, 2012
Immediately after closing AutoCAD Architecture 2012 or AutoCAD MEP 2012 a yellow warning triangle with a black exclamation point displays. This happens every time AutoCAD is closed. However it is isolated to a few systems all of which were installed using the same deployment as the other systems that do not display this warning. AutoCAD performs as expected but displays this warning when closed.
View 9 Replies
View Related
Aug 14, 2012
You know how when you cut and paste a viewport from one sheet to another and the viewport has to be turned ON by using Mview / ON - is there a way to set the default to always ON?
View 4 Replies
View Related
Sep 13, 2013
I want to know that we can't put out any object from new blank sheet? like illustrator and coral draw..
we are running a advertising company Buzzooka Infomedia and we often use photoshop for make designs and website templetes so we face inconvenience without this feature in photoshop
[URL]...
View 3 Replies
View Related
Jun 26, 2013
I have a user who is experiencing a blank or improperly rendered layer dialog box from time to time (see image attached).
I've seen this with another user at a different office as well. I assume its a video driver issue but as I'm strictly a CAD manager and not IT support, messing around with that is outside my responsibilities.
A restart usually fixes the issue but I figured I try to at least find out of its a known issue with a known cause (and a known fix).
View 1 Replies
View Related
May 3, 2013
Whenever I attempt to marquee select (click-hold and drag a box) in Viewport 2.0, the viewport becomes a blank white screen and instead of drawing a box my mouse draws a single thick line. When I release the mouse, the viewport will not return to normal until I move the camera. It actually does perform the selection that I would expect. However, not being able to see what I'm doing is a bit of a pain sometimes.
The irony is that it actually works fine in default and high quality modes, but I'm not able to use those because the transparency sorting is really wonky and doesn't let me see what I'm trying to work on from the angles that I need. Only Viewport 2.0 solves that problem.
View 2 Replies
View Related