simple project, 2 story house, 4 generated elevations, file size 600k. ACA is very slow (+4min) to almost freezing up when trying to drag a view from the view drawing into a sheet. xml files match the drawing file. only way to get the views to drop into sheets is copy the traced over views into a clean non-generated elevation view drawing and create the model space views from there.
View 2 Repliesi have views lets say 3 views on a sheet but in the list of views theres mores that appears maybe i inserted the extra views that are showing but i deleted them to put them on another sheet
the problem is they show up in the list of both sheet and i can't delete them from the list of the sheet that they were before
Working in an idw file, I have a need for two drawing sheets with the identical views of the same part. However, each sheet will need different dimensions and annotations. What I would like to do is after completing one sheet, in one step create the second identical sheet, then just edit/add dimensions and annotations. Is there a method to do this? So far, I have only been able to copy one view at a time from sheet to sheet.
View 2 Replies View RelatedI need to copy only the section views to other sheets.
View 2 Replies View RelatedEvery time I create the sheets C3D ask me to create a profile view ?
But ... I already have it ....
Does C3D ask always for a new one ?
When creating cross section views ("Home>Section Views>Create Multiple Views"), my sections are being placed at the exact boundary of the viewport (viewport is per my template).
Surely there's a way to create a margin inside the viewport.
Here's a screen shot of what I'm seeing. Notice how the dotted "Plot Area Boundary line is going right thru the left axis labels and on top of the bottom axis blue line (which means the bottom axis labels will NOT be seen).
Whenever I try to print sheets that contain shaded (or better) 3D views, these 3D views do not appear on my prints/Pdf's/DWFx's. I've tried different PDF-drivers and hardcopy printers that are in my office, but they all don't work.
Some things that maybe can narrow the cause down:
- Printing a single 3D view to a DWFx works
- Printing a single 3D view to PDF or hardcopy printer doesn't work
- Printing a Hidden Line view on sheets works on alle printers
- 2013; printing a sheet containing 3D views works. When upgrading the same project to 2014, the same sheet fails.
I have made some sheets in 1 revit file and made elevation views and put them on the sheets. Now I want to move those sheets to another file.
Is it possible or do you just have to make new sheets and views? It doesn't look like is works within 'Transfer Project Standards'.....
I cannot get this feature of 2013 to work for me. When I grab a selected item and drag it to the new drawing window, I get at round circle with a line through it or sometimes I get a command that says invalid.
View 3 Replies View RelatedSince I installed autocad architecture 2012 I have this problem. When I drag a view from the project navigator in a sheet I see the content and the option to set a scale. So far so good. When I click in the sheet to set the location the viewport goes empty. I can stretch the viewport to top left to get the drawing within range and then move it back to where I want to place the drawing.
View 5 Replies View RelatedWhen i am creating section sheets from multiple section views ,section sheet view port scale changes.I did set it correctly in my template.
For example it changs from 1:150 to 1:150_1
Then in section sheets scetions views are not displaying correctly.
When i change view port scale manually it shows correctly.But it should do to all sheets.
What should I do?
In model spacr multiple section views are showing correctly.
AutoCAD Civil 3D 2012 SP 2
Sri Lanka
I'm starting to set up Sheets from our template but none of the construct is transfering except for dimension lines. The views are drug in from Project Navigator. Elevations are fine, but when the viewport window is made larger the construct isn't there. I've attached an example of what is supposed to be the floor plan.
I've edited the walls but that made no difference. They are set to start at 0". Is there anything I haven't checked? I'm supposed to go to contract with these drawings next week.
We are using ACA2010 and use the project navigator to bring constructs into views then bring the views into sheets, which has been working great, but in the last few months we have gone to a sheet only to find that the view no longer contains the constructs. I was working on a project on Friday and the Site Plan view no longer had the site xrefed into it which I fixed, now today the Site Plan is fine but the Roof Plan is empty. This is not the 1st project this has happened to but it is the 1st time it has happened to me so I know nobody changed something they should not have. Is there a known bug in 2010 or something I should check. I don't want this to happen to the Floor Plan if it does I will lose all my dimensions.
View 2 Replies View RelatedAny way to transfer a same Lman in a Constructs floor plan dwg to a floor plan view?
My work place produces construction drawing only, no 3D, and we would like to start using constructs, view, sheet system for dwg. orginzing only. We mostly work on big commercial projects.
In Constructs, we have our main plan which includes partition plan, RCP, furniture plan, finishes plan, with annotation, and we manage all this plan through LMAN.
When I create views, I will open my main plan and open lman to set it on partition plan (for example), and save dwg. From here, I create my partition plan view, and a very clean partition plan view created very nice. And I will do the same to create views for RCP, furniture plan , etc.
The one problem is, when will views already created, we sometimes need to go back to the main dwg. and add new layers and informations. LMAN we set up nicely and I work very well on the main plan after we add new layers in certain LMAN control plans but the same LMAN system doesn't transfer to views. I will need to open every plan view and layoff the new layer that just created. I am wondering is the view will updated the same LMAN that we set up for our main plan, so we save time to check our view is showing the right information?
I'm using project navigator and I want to use the intelligent title marks created by the Mode Space View drawing that is created when I use the Detail Boundary.
I have purchased a 5 hour block of support time on this and after 4 days they have not found a result for me and are looking to developers at this point.
My issue is this. I xref in the floor plan that I want to use to make some enlarged floor plan details out of. I have a custom high detail display configuration set for this view drawing. I use the detial boundary tool that adds the detail boundary and tag and then created my model space view with an intelligent titlemark that will then reflect the number and sheet when inserted into a sheet drawing.
The problem is trying to get this MSV to reflect what I see on the floor plan. As of now it just brings in a enlarged detail of the area but it's all the same color with no hatch detail.
I can change the result of what I get by selecting the “model space view” that I created and then going to properties and changing the “display controlled by” on the display tab of the properties of that object. If I change that to “Drawing default setting” then the result is set to whatever the drawing default settings are. It looks like the “default settings” for a 2D Section/Elevation object are “General” Display Representations.
how to get my custom “Bew_High Detail” display representation to be the default Display Representation of the “2D Section/Elevation” object then I think I would get my desired results.
Autocad architecture 2014 64bit displays conceptual views as wire frame for walls when displayed in 3D
View 9 Replies View RelatedAutocad architecture 2014 64bit displays conceptual views as wire frame when displayed in 3D;
View 9 Replies View Relatedshouldn't sheets marked as "exclude from count" not be counted?
I tried this in both 2013 and 2012 to see if maybe AutoDesk broke it, but it doesn't work in either one. This is easily reproducible for me, a file shouldn't be necessary. Just open up (or create) a multi sheet drawing. Go to edit sheet on one or two of them and check the "exclude form count" box. Now create a new iLogic rule and put the following line into it:
MsgBox("This is the number of sheets in the drawing: " & ThisDoc.Document.Sheets.Count, VBOkOnly, "Number of Sheets")
I have several different views xreffed into a single view, should'nt they all share the base construct? i.e. If I want to overlay the lighting plan, HVAC plan and my reflected ceiling plan- they should share the first floor construct. Instead each one brings in the same base construct and then when you overlay them, the walls interfere and you get wall errors.
View 9 Replies View RelatedI'm refining some SVG files, imported into GIMP as paths. I added numerous guides on the images and drag anchors to the guides. All the paths consist of straight lines only. The problem is that on some anchors GIMP performs the "drag curve" operation instead of the "drag anchor". As a result, my straight lines become broken (curved).
The only solution I've found so far is to apply maximum zoom level, say 400%, and repeat the dragging in this resolution. This makes GIMP work properly, at least, I'm able to "drag anchor" as expected. But switching back and forth to the 400% zoom level is a bit annoying and inconvenient.
Is there a better way to "say" GIMP that "dragging anchor" is the "dragging anchor", not "dragging curve"?
I am trying to create a second base view (using Layout/Create View/Base from model space). The problem is, I need it to be rotated from the original base view. However, when I rotate the part in model space, ALL of my views change.
So I guess my question is, how do I create multiple views of the same part that are seperate from the other base views?
We would like to make the transparency of glass-materials visible in views and section-views by using the "realistic style". During a 3d-view our glass-material looks like transparent. Isn't it possible for REVIT to display the transparency of materials in views ?
The workaround to hide "glass" by using "overriding visibility" is not possible for us because some of our families and project families are using glass-materials inside (Showcases f.e.).
Software (German) :
RAC 2012+2013
Inventor Pro 2013
AcadM 2012
MaxDesign 2013
Sketchup 8 Pro
Since the end of Aug. 2012 I've been making families for a manufacturer. I left Friday evening with good families. This morning I am finding all the families I checked with a problem.
When I move the cursor across the various views it doubles the views. Rolling the mouse wheel one click either way to zoom in or out cleans the view but on the next time the cursor goes across the view it doubles it again. Now there are 4 views overlapping each other. The next time it is possibly 8, and so on. It is difficult to count them because they are overlapping but it looks like they are doubling each time.
The software is Revit Architecture 2011 and the computer is a Dell Precision T3500.Are the families corrupted or is it the computer? Is there a toggle I hit that I shouldn't have?
When I right click on a selected object, I need the contextual menu to show up but, very very often, the result is that the object moves itself slightly! And that's of course terrible. Basically, when I select an object and right click on it, it can randomly move to somewhere else (a few millimeters away from the original point, so it's often hard to notice if it moved or not) or autocad can show me the menu.
How can I disable this annoying and useless dragging feature? I've realized that these kind of things happens only now and looking at some of my drawings, I've seen that many objects (mainly hatches) are moved from the point they are supposed to be!
i cannot get the tools name while dragging the cross hair towards the tools it is displaying only some boxes .
View 3 Replies View RelatedI made a complex sketch, and want to extrude.When i want to select the whole sketch, i position the mouse on the upper left of the screen and drag down and right, but no window is created.
And i cannot add segments to the selection, even with pressing SHIFT, because immediately after the first is selected, it is extruded.you see on the picture i attached that some segments (in red) are connected. how can i connect all the sketch together, so when i will select it everything is selected.
I have a realy big assembly.
but I have to creat sub-assemblys.
I just place empty sub-assemblys in the big assembly,
drag and drop the specific parts i want the sub-assemblys.
But is there a way to drag and drop Patterns too?
Inventor is always priventing me to do so.
So i destroy the Patterns, drag and drop the specific part that made the Pattern,
and re-creat the Pattern in the sub-assembly.
how to draw 3d box in Dragging Using object arx.
View 2 Replies View RelatedWhen I drag parts in the browser to a folder I created half the time they end up just above. I always wait for the folder to highlight blue before dropping but why don't part go there as requested all the time?
Is this a step up on my station, precision of the cursor? My colleagues don't seem to have this problem but we can't see any differences in our step up except I use a different mouse.
I have a line (not a polyline) that i need to extend by dragging one end to an arbitrary location but must conserve the orientation of the line. I then have to drag the other end point in the opposite location to a location that I pick (ie, not a cad feature, but by human eye)
POLAR works good in that i know the angle, but the line is allowed to be drawn wherever, and i need to focus on precisely where i extend the line too and not that the angle is changing.
Move labelpecify the locationFunction cancelled"
*** INTERNAL ERROR: VL
namespace mismatch
"" type Y to reset: "*Cancel*
C3D 2012
Win 7 64. 12 GB