I have made some sheets in 1 revit file and made elevation views and put them on the sheets. Now I want to move those sheets to another file.
Is it possible or do you just have to make new sheets and views? It doesn't look like is works within 'Transfer Project Standards'.....
Whenever I try to print sheets that contain shaded (or better) 3D views, these 3D views do not appear on my prints/Pdf's/DWFx's. I've tried different PDF-drivers and hardcopy printers that are in my office, but they all don't work.
Some things that maybe can narrow the cause down:
- Printing a single 3D view to a DWFx works
- Printing a single 3D view to PDF or hardcopy printer doesn't work
- Printing a Hidden Line view on sheets works on alle printers
- 2013; printing a sheet containing 3D views works. When upgrading the same project to 2014, the same sheet fails.
i have views lets say 3 views on a sheet but in the list of views theres mores that appears maybe i inserted the extra views that are showing but i deleted them to put them on another sheet
the problem is they show up in the list of both sheet and i can't delete them from the list of the sheet that they were before
Sometimes when I print multiple sheets to a Combined PDF file Revit goes through the process and combines all of the sheets in one PDF file but then it continues to re- print the PDF file as many times as the number of sheets.
View 9 Replies View Relatedsimple project, 2 story house, 4 generated elevations, file size 600k. ACA is very slow (+4min) to almost freezing up when trying to drag a view from the view drawing into a sheet. xml files match the drawing file. only way to get the views to drop into sheets is copy the traced over views into a clean non-generated elevation view drawing and create the model space views from there.
View 2 Replies View RelatedWe would like to make the transparency of glass-materials visible in views and section-views by using the "realistic style". During a 3d-view our glass-material looks like transparent. Isn't it possible for REVIT to display the transparency of materials in views ?
The workaround to hide "glass" by using "overriding visibility" is not possible for us because some of our families and project families are using glass-materials inside (Showcases f.e.).
Software (German) :
RAC 2012+2013
Inventor Pro 2013
AcadM 2012
MaxDesign 2013
Sketchup 8 Pro
I am exporting multiple views as DWGs to create backgrounds.
When I set Naming: to Automatic - Short, it produces files named like:
FloorPlan-2D_L1_Interiors.dwg,
FloorPlan-2D_L1_Structural.dwg,
FloorPlan-2D_L2_Interiors.dwg, etc.
The 2D_L2_Interiors is the name of the view, and it is a FloorPlan so it adds that as a prefix. I am looking for a way to force Revit to ignore the prefix.
Is there a way to export these so they are automatically generated like:
2D_L1_Interiors.dwg,
2D_L1_Structural.dwg,
2D_L2_Interiors.dwg, etc.
Does the Naming: Manual (Specify file name) option have the ability to use fields for parts of the name, perhaps taken from Project Parameters or something? So in the filename box I'd be able to say {View Style}-{View Group}-{View Name}.dwg and end up 3D-Interiors-SomeViewName.dwg?
Or should I download Ant Renamer and call it a day?
I have thought about this and want to get input on a best approach to utilizing Views created in a linked Revit project file. One need is to create a Callout within the current Revit project and reference a view from another linked project. This is a common need in many of our projects
View 3 Replies View RelatedWorking in an idw file, I have a need for two drawing sheets with the identical views of the same part. However, each sheet will need different dimensions and annotations. What I would like to do is after completing one sheet, in one step create the second identical sheet, then just edit/add dimensions and annotations. Is there a method to do this? So far, I have only been able to copy one view at a time from sheet to sheet.
View 2 Replies View RelatedI need to copy only the section views to other sheets.
View 2 Replies View RelatedSince the end of Aug. 2012 I've been making families for a manufacturer. I left Friday evening with good families. This morning I am finding all the families I checked with a problem.
When I move the cursor across the various views it doubles the views. Rolling the mouse wheel one click either way to zoom in or out cleans the view but on the next time the cursor goes across the view it doubles it again. Now there are 4 views overlapping each other. The next time it is possibly 8, and so on. It is difficult to count them because they are overlapping but it looks like they are doubling each time.
The software is Revit Architecture 2011 and the computer is a Dell Precision T3500.Are the families corrupted or is it the computer? Is there a toggle I hit that I shouldn't have?
Every time I create the sheets C3D ask me to create a profile view ?
But ... I already have it ....
Does C3D ask always for a new one ?
When creating cross section views ("Home>Section Views>Create Multiple Views"), my sections are being placed at the exact boundary of the viewport (viewport is per my template).
Surely there's a way to create a margin inside the viewport.
Here's a screen shot of what I'm seeing. Notice how the dotted "Plot Area Boundary line is going right thru the left axis labels and on top of the bottom axis blue line (which means the bottom axis labels will NOT be seen).
When i am creating section sheets from multiple section views ,section sheet view port scale changes.I did set it correctly in my template.
For example it changs from 1:150 to 1:150_1
Then in section sheets scetions views are not displaying correctly.
When i change view port scale manually it shows correctly.But it should do to all sheets.
What should I do?
In model spacr multiple section views are showing correctly.
AutoCAD Civil 3D 2012 SP 2
Sri Lanka
Using "transfer Project Standards", I'm having trouble getting everything to come across, particularly the V/G Overrides Filters. They are included in the View Template in the original project, but are all missing after transfer.
View 6 Replies View RelatedIf you have a large project and many outside walls have large sections that are the same can you create exterior dimensions on a number of different levels that are tied together. In other words they are the same annotation done once for all those levels without cutting and pasting or doing the same dimensioning on the different levels, which is very error prone and the chances of different dimsions showing on different levels that are supposed to be the same is very large.
I am thinking of something like bing able to x-ref the dimensions like you can do in autocad. Is anything like this posssible in Revit?
No problems so far when I check the "Export views on sheets and links as external references" but when I do not check that box some dimension strings move ridiculously far away from the location as seen in Revit. This project is huge and we do not want XREFs for every single sheet (DWG file). Each view on the sheet is exported as a DWG block. I could modify each view with this problem, but it beats the point of exporting. Attached is a sample file.
View 1 Replies View RelatedWe usually print our sheets to PDF from REVIT. However, whenever a sheet has a 3D view with shade and shadow the PDF file has what appears to be a bunch of rasterized tiled boxes. Of which the borders of these boxes show up through the 3D image.
View 3 Replies View RelatedI would like to be able to add a single revision to all sheets at once. For example when doing a major issue of all sheets for building approval. In this case I don't use revision clouds but use the "Revisions on Sheet" function in the properties for the individual sheet. Hence the problem, having to individually select every sheet one by one and add the revision to each sheet. Is there a way to multiple select all or some sheets and just do it once? I've tried doing this through a schedule but that doesn't let you select and change a revision either. Is there an add-in that could do this perhaps?
View 3 Replies View RelatedWe have drawing lists that exceed the area available on the sheet and want to split it between 2 sheets. I have accomplished this with a parameter that can be filtered per view but was wondering if there were any other methods you may have used?.
View 1 Replies View RelatedWe have several users utilizing the same printer. To prevent sheets from different jobs from mixing, and a large quantity of pages sitting in the printer, each print job is queued in the printer until the sender requests that it be printed at the printer. With Revit, the problem is that each sheet is sent as a separate print job, meaning that a 300 sheet print jobe requires me to stand at the printer and request that each one be printed (300 requests). In AutoCAD, the PUBLISHCOLLATE variable sends all sheets in a publish operation as a single job. Is there a way to do this in Revit 2011?
View 2 Replies View RelatedI have created a big and complex Revit model, in Revit 2013. It's now time for me to print the sheets - I want them in PDF and DWF. But I really have some problems doing that. When I print to PDF it takes about 20 minutes for it to print 1 drawing - and it will not be complete - elements are missing compared to the original view. Often Revit stops working - and it's the same story when I try to save a DWF.
I think the reason why I have the problem is because of the complexity of the building's geometry. Have modeled it by importing SAT. files from Rhino - to create the form. The result is great but the file is now 370 Mb. I'm trying to link the model in to a new Revit project to minimize the file, and hopefully get the drawings printed in PDF and DWF. In the the new project I can't see the sheets from the linked file though.
Is there a way to link the sheets to another procjet?
Having now worked out a method of adding custom labels to sheets via a shared parameter file I want to know if there is an easier way of making these parameters fully functional in any project without having to set project parameters in the file.
The method is (assuming starting with New > Family > Titleblock or some sort of Sheet family ):
Create shared param .txt file (Manage>Shared Params>Create) - then browse for that new file to load (within Edit family sheets)Group>New then Params>new (make sure param names are unique and distinct from system parms for text labels) - set Type to TextThen addtext label (add param at bottom LHS > Select > Edit > Browse to open shared param file) then add your custom param to Label Params table.When the sheet is loaded into a project the custom labels will not be editable.
This is the annoying bit having to set up proect params in each project:Manage > Proj Params > Add > Shared Param > Select > Edit > Browse to shared param file > select each custom param in term > OK >Group Param = Title Text and set Category to Sheets. The custom parameter will now be editable (each shows as ? and not been able to find a way of showing a default label text.
Is it really necessary to do this (step 5) with every project file or is there a way of loading a custom sheet and setting project parameters automatically?
Also is there any way of adding (or editing) params to the System Family for drawing sheets. An example is scale where the sys param updates to the first loaded view scale, then if a different scale vies is loaded, changes to "As indicated". I prefer to quote the main scale. Additionally the System file date param is the current date. My preference is set the date to first issue and then list revision dates separately (which is a common company standard in the UK).
how I can change the revisions to multiple sheets quickly, instead of going into each and every sheet and manually changing the revision?
Surely Autodesk has a fast and simple way to do this.
I am using the student version of Revit and have desparately been trying to create a document that would print to scale. I use PDF creator to convert Revit to pdf, but it always comes messed up by an inch or so...insted of 4.6, it prints 4.75 (or the other way around). I tried formating my title block in many different ways, including deleting the outer lines. Nothing works. There is no Arch D format in the family of titleblocks. I am a complete beginner, just started using Revit a couple months ago, with no knowledge of CAD or anything similar. When I look at the PDF creator page of my doc, it shows that the doc has been properly sized, but when the print place prints it out, it is off by 1" or so.
How do I format my sheet so it prints to scale in format 24" X36"?
If I have several sheets of several floors, and I want the views in each sheet to be positioned at exactly the same position. How do I best accomplish that?
You can use the "Guide Grid" to place the views on a sheet. Then you can align the view (using the grid lines) to this guide grid. In the other sheets, you can use again the same guide grid, just select the guide grid name in the properties of the sheet.
Additional information about guide grid is available in the Revit help, search for "Aligning views on a sheet" or "Guide Grid".
Is it possible link one view into multiple sheets? I would like one key plan to appear in all of the plan sheets.
View 6 Replies View RelatedI'm trying to add a hatch on a sheet , but the Filled Region button is grayed out ???
View 6 Replies View RelatedWe are looking for an easy straightforward way to print / export an entire set of sheets to pdf.The sheets have different papersizes and we want them to be named with the sheet number + name, and possible a prefix by choice.We have Adobe Acrobat X installed as pdf printer.So far we managed to print an entire set to pdf with these somewhat annoying issues:
1. The naming adds the word "sheet" between the chosen prefix and number-name.can we get rid of this?
2. The prints seem only to follow the actual Revit Print-setup, on papersizes.Which means that we need to have print-sessions on every paper size used in a project.Strange that in Revit the paper print-setup, doesnt follow the sheet definitions.(?)Is there a way within Revit to solve this to a more automated workflow?Or do we have to implement third party plugiins / solutions?
I’m wondering if there is a way to fill the values of all parameters of a title block for ALL sheets at a time. Are we supposed to fill out these parameters for each single sheet manually despite that fact that they are similar?Surely, I’m not taking here about the sort of information that differs from sheet to another like the “sheet name”
Why ALL the parameters of the title block are not shown in the properties dialogue box?
How to change the order of the sheets? Is there a way to move the sheet up and down?
Is there an automated way to re-numbering the sheets based on a given start value say A001?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
How to set the distance between the views?Is there a way to set the distance between the views? How much is it by default?
View 4 Replies View Related