AutoCAD Inventor :: Cannot Select By Window Dragging
Jun 23, 2012
I made a complex sketch, and want to extrude.When i want to select the whole sketch, i position the mouse on the upper left of the screen and drag down and right, but no window is created.
And i cannot add segments to the selection, even with pressing SHIFT, because immediately after the first is selected, it is extruded.you see on the picture i attached that some segments (in red) are connected. how can i connect all the sketch together, so when i will select it everything is selected.
View 9 Replies
ADVERTISEMENT
Oct 19, 2011
I have seen selection filter and apply selction of faces and edges.
I want to leverage this further. In a part, is it possible to simply drag a window and have inventor select all faces?
Inventor Professional 2013
Vault Collaboration 2013
View 9 Replies
View Related
Dec 3, 2013
With "Select Annotations" I can window select multiple annotations at once. Why can't I window select bodies, features, or face and edges? AutoCAD, NX and Solidworks can do it. Do I have to change a setting somewhere?
View 1 Replies
View Related
Nov 9, 2011
I am unable to select Sketch geometry via a crossing window to project to a new sketch.
While in the new sketch if I select " Project Geometry " I am only able to select one line at a time. quite tedious for some of my larger projects.
I can not honestly say that this feature was available in previous releases but it seems to me it was. Am I missing a variable somewhere?
View 2 Replies
View Related
Sep 5, 2013
I accidentally turned something on in Autocad, and I want it to go away, I have no idea what it's called or how to get it gone. It's akin to the "select other" window in Inventor when you select at the intersection of several objects.
How do I make this go away?
View 2 Replies
View Related
Mar 23, 2009
Why does an image darken while dragging the window within Photoshop CS4?
Once the window is released with the mouse/pen, it snaps back to how it was?
Explained further:
Open an image in Photoshop CS4.
Click & hold the grey title bar at the top of the image.
Move it around within the Photoshop window.
It noticably "pops" - darkens.
Release the mouse/pen, image snaps back to how it was.
Weird
I've put a sample point on a section of the image, numbers don't change.
I've tried disabling "Open GL Drawing"
- Doesn't happen but...
- Image appears darker as per when dragging with "Open GL Drawing enabled.
- Numbers remain the same on the sample point.
Hope this makes sense.
Here are some specs:
Photoshop V 11.0.1
Graphics Card: NVidia GeForce 7950 GT
Driver Verssion: 182.08 (latest)
Windows Vista Business, 64-bit (Service Pack 1)
8GB RAM
View 13 Replies
View Related
Feb 7, 2013
-------setup:
ps cs 6
win 7 64
dual monitor setup
preferences -> perfomance as follows:
use graphics processor: ticked
advanced settings:
drawing mode: advanced
everything else in advanced is also ticked
problem:if i drag an image on my secondary (image editing) monitor the images saturation/color changes while i drag it. on mouse release it goes back to normal.this doesnt happen on my primary (system etc) monitor.yes i could probably workaround making my editing monitor my primary monitor, but i don't want to, because i want it free of windows bars and similar rubbish.
View 1 Replies
View Related
Apr 15, 2013
I drop multiple photos into Photoshop then drag one at a time away from the tab bar in order to place these photos onto one layered image. I can do this but the photo I have dragged down remains positioned where i dragged it to and cant be freely moved to another part of the screen. It springs back like its on a rubber band. This is a problem when I wish to close the floating window and don't have the top right close button visible.
I have to return it to the tab top bar in order to open it then close the window. I previous versions of PS this was not a problem and now requires all these extra steps to solve. Its very frustrating when I have to work like this all day. I have PS CS6 on MS WIN7. Is there a preference selection I can make. I want to make photoshop windows behave like MS windows and remain where I drag them to.
View 9 Replies
View Related
Jan 17, 2012
My Vista system has developed a few bugs which are not cured by Norton 360.Dragging a window causes it to maximize in a few programs PASTE does not work in some programs -- including X4 . The CROP tool stopped working in X4 but is OK in X5 High-lighting is erratic in WORD etc.
I can only run a "clean" install from my OEM disk which means reloading all applications.I was wondering if I should give up and install Windows 7.
What has been your experience with Windows 7/Did you do a "clean" install or just the update.
View 4 Replies
View Related
May 11, 2012
While making selection by drawing a selection window, the objects often get seelected and get dragged. These objects lie on the starting vertex of the selection window. Therefore I have to find the desired bjects to be selected in object manager lying in haphazard order. Is there a way , the objects don’t get dragged while making a selection window from left to right. That means, the objects get selected which are present in the selection window only.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
View 8 Replies
View Related
Feb 16, 2014
I've been trying to select and area of a JPEG but the whole thing keeps moving around.
View 2 Replies
View Related
Apr 2, 2012
When I try to create a table from line tags, I can do it if I select them each individually. But I cannot accomplish selecting the line tags by "windowing", as it will ask me if I want to turn ALL line labels into tags first, which I do not wish to do.
For a curve table, windowing works very well.
Is there a trick to selecting your line tags by window?
C3d 2010 (no SP)
Win7
View 7 Replies
View Related
Jun 16, 2011
Using 2012. On pre-07 versions I've used, I could change the style of all dimensions in a drawing by selecting all entities (or using window selection) and then selecting the new dimension style from the combo box, regardless of what layers or entities were selected. Any dimension within that selection gets changed to the new style selected. In 2012, if I select any entity that isn't a dimension, no dimensions styles appear in the combo box, and so this method doesn't work.
Is there some new setting preventing this from working?
View 2 Replies
View Related
Jun 23, 2011
When trying to select entities with a window or crossing polygon (and hitting enter) there are no grips showing to indicate that the selection has been completed even though the entities seem to be highlighted. Syntax: select, enter, wp, enter (draw polygon), enter.
I am a part time user of this wonderful program and only recently moved to 2010 and yet I cannot figure out what I am doing wrong. I have Googled and looked in my texts and still am having difficulty (also attempted to search FAQ on this site but the link malfunctioned).
View 9 Replies
View Related
Jul 12, 2012
I'm refining some SVG files, imported into GIMP as paths. I added numerous guides on the images and drag anchors to the guides. All the paths consist of straight lines only. The problem is that on some anchors GIMP performs the "drag curve" operation instead of the "drag anchor". As a result, my straight lines become broken (curved).
The only solution I've found so far is to apply maximum zoom level, say 400%, and repeat the dragging in this resolution. This makes GIMP work properly, at least, I'm able to "drag anchor" as expected. But switching back and forth to the 400% zoom level is a bit annoying and inconvenient.
Is there a better way to "say" GIMP that "dragging anchor" is the "dragging anchor", not "dragging curve"?
View 1 Replies
View Related
Aug 10, 2011
as title if I need to select one by one，it will be too slow....Should this function be accompolished by LISP? But I am not familiar with LISP.... the situation is that I have many irregular lines distributed in disorder, and what I want to do is just lengthen these lines "3.5" Meters from the start point of each line.
If I can do this way , then I can join the line to some points correctly in Arcmap.
View 9 Replies
View Related
Jun 29, 2013
I have a realy big assembly.
but I have to creat sub-assemblys.
I just place empty sub-assemblys in the big assembly,
drag and drop the specific parts i want the sub-assemblys.
But is there a way to drag and drop Patterns too?
Inventor is always priventing me to do so.
So i destroy the Patterns, drag and drop the specific part that made the Pattern,
and re-creat the Pattern in the sub-assembly.
View 2 Replies
View Related
Jun 6, 2013
When I drag parts in the browser to a folder I created half the time they end up just above. I always wait for the folder to highlight blue before dropping but why don't part go there as requested all the time?
Is this a step up on my station, precision of the cursor? My colleagues don't seem to have this problem but we can't see any differences in our step up except I use a different mouse.
View 7 Replies
View Related
Jul 30, 2013
When you select similar using autocad it select similar in entire drawing. What i want is i am able to select similar using the same setting of selecting similar but with window selection instead of entire drawing ?
View 6 Replies
View Related
Oct 10, 2012
When creating a Parcel Line Table, C3D will not select tags by style or window. Only direct pick. I have a fresh install with no other bugs. [URL]...
View 3 Replies
View Related
Dec 19, 2012
Is there any way to open a new window of your model that is not inside the main window of inventor?
I have two monitors and would like to be able to have another window / view open on the other monitor.
View 1 Replies
View Related
Oct 21, 2011
We've been using Tube and pipe for a few months now, and still working through the quirks and tricks for producing a stable route. One problem however as more users are starting to use T&P is when in the top level T&P assembly they are dragging on a route and not always aware they have done so - this can result in the route being rotated fractions of a degree or moved fraction of mm and causing no end of confusion and frustration later on trying to diagnose and fix. Is there a way to 'lock' a route in place so it cannot be dragged in the top level?
Have tried switching off adaptivity in the i Properties of 'Tube & Pipe Runs' assembly, but this usually switches back on automatically. One user had a problem where the included geometry (taken from the x,y,z axes) had also moved and had to be deleted and redone - Wouldn't have thought anything based on the x,y,z axes should move?
View 8 Replies
View Related
Aug 21, 2012
Is there a way to select all the layers in the Layers Window? is: I've got a GIF animation that's comprised of 590 individual layers, and to work on specific layers, It'd be convenient to be able to hide all the layers other than the layer I'm working on - maybe with a dialog under Layers>>Stack>>Select all Layers>>Hide, or an "eye" checkbox at the top or bottom of the Layers window that would select all layers, thereby allowing me to "unhide" the selected layer by checking the "eye" ,(show), checkbox of the relevant layer.
Currently, the only way I know of to work on a specific layer within such a stack is to move the layer to the top of the stack so it becomes the visible layer, perform the work, then return the layer to its original location.
View 4 Replies
View Related
Dec 4, 2012
Import fbx file of revit 2011 in 3ds max design 2012. I can't select the glass separate from the window frames.!
View 1 Replies
View Related
Aug 19, 2013
Why won't my welcome window show initially even when I select it to do so?
View 3 Replies
View Related
Feb 20, 2013
I want to do rectangular selection (window select) couple of clips. So i try to click and drag (start from any empty area in timeline), but most of the time , i will end up picking up or moving the empty track (gap). In any other editing app , i can simply click and drag but not in Smoke. Yes, i have to click in specific area in the timeline so i can properly create a window selection .
View 9 Replies
View Related
Feb 28, 2011
(defun CELBLKS ( / e blk ss blkl)
(setq blkl "" ss (ssadd))
(while (setq e (entsel "
[Code]....
i have this lsp, it works great but how can modify it if i want select with a window.? exemple: if i have 3 differentes blocks, i want to select them with windows and the lisp select all blocks that are identical of those 3.?
View 9 Replies
View Related
Dec 18, 2012
Is there a way to expand the constraint window so that I can see my entire parameter formula? In the image below, my equation is cut off in the "offset" window. Or am I supposed to be inputting the parameters in some other manner?
View 9 Replies
View Related
Oct 10, 2013
Freshly started on an Inventor 2011 student version, I closed a window which showed the elements of a piece in a hierarchic manner (axis, planes, extrusions, holes,... and sublying scetches). How it can be opened again?
View 3 Replies
View Related
Sep 21, 2013
I am having trouble installing Inventor 2014 on my windows 8 laptop, I keep getting a window with "Communication Error"
View 3 Replies
View Related
Sep 9, 2013
I`m looking for the code which will capture the active window similar to iProperties-->Save--> Capture
View 4 Replies
View Related
