With "Select Annotations" I can window select multiple annotations at once. Why can't I window select bodies, features, or face and edges? AutoCAD, NX and Solidworks can do it. Do I have to change a setting somewhere?
View 1 Replies
as title if I need to select one by one，it will be too slow....Should this function be accompolished by LISP? But I am not familiar with LISP.... the situation is that I have many irregular lines distributed in disorder, and what I want to do is just lengthen these lines "3.5" Meters from the start point of each line.
If I can do this way , then I can join the line to some points correctly in Arcmap.
I'm trying to paste in things like "N.G.", "Top of Bank", "Edge of Water" all at certain points to annotate the topography. I've tried the following:
text N.G 800,90
text Top of Bank 820,90
But I keep getting the prompt for annotation angle and it gets stuck there so I tried:
text N.G 800,90 90
text Top of Bank 820,90 90
But the same thing occurs. I need the text to be vertical. I've done some searching here, but haven't come up with much. I don't want to resort to creating blocks and importing the attributes as I'm sure it's much easier than that.
I made a complex sketch, and want to extrude.When i want to select the whole sketch, i position the mouse on the upper left of the screen and drag down and right, but no window is created.
And i cannot add segments to the selection, even with pressing SHIFT, because immediately after the first is selected, it is extruded.you see on the picture i attached that some segments (in red) are connected. how can i connect all the sketch together, so when i will select it everything is selected.
I have seen selection filter and apply selction of faces and edges.
I want to leverage this further. In a part, is it possible to simply drag a window and have inventor select all faces?
Inventor Professional 2013
Vault Collaboration 2013
I am unable to select Sketch geometry via a crossing window to project to a new sketch.
While in the new sketch if I select " Project Geometry " I am only able to select one line at a time. quite tedious for some of my larger projects.
I can not honestly say that this feature was available in previous releases but it seems to me it was. Am I missing a variable somewhere?
I accidentally turned something on in Autocad, and I want it to go away, I have no idea what it's called or how to get it gone. It's akin to the "select other" window in Inventor when you select at the intersection of several objects.
How do I make this go away?
I need to do a cut extrusion on a multibodied part and need to select the solids. As of right now I have to select each one individually rather than doing a drag box or something like that. how I can do this fast, I've got a multibody part w/ over 1000 solids (I didn't create it, yes I know this is probably excessive).
View 9 Replies View RelatedIn an assembly with unconstrained parts, if you select multiple parts and drag the parts, only the first selected part moves.Is this just me?
View 3 Replies View RelatedIs there a way to prevent losing annotation in drawings if you make a minor change in the model. For example if you change the size of a W beam you lose all the welds and text associated.
View 1 Replies View RelatedI have a coworker who opens an Inventor 2014 (Inventor .dwg) drawing in AutoCAD Mech 2014 and only the views show. No annotations, titleblock, or border. If I open the same drawing in my AutoCAD Mech 2014, the drawing appears correct. Both have service pack 1 applied to Inventor and AutoCAD 2014...
View 7 Replies View RelatedMy annotations disappear when i replace an ipt with similar ipt in an idw file. The view and the browser update to the new part but the annotation disappear.
I am working with a front view in both ipts.
I am looking for how to use iLogic to Auto Re-attach Orphaned Dimension.
Core i7-2630K
12GB dual channel Corsair XMS3
Nvidia quadro 2000
128 vortex 2 SSD
WD 7200rpm Black
Asus P8P67 DELUXE
Product Design Suite 2012 Ultimate
Right now, when i click one object and then another, the first object becomes deselected. Holding shift is the only way for me to select multiple lines right now (other than dragging of course) but that's not what I'm used to and it annoys me a lot. At first everything is fine but then after a while it does this without me changing any options at all.
View 9 Replies View RelatedI'm sure this has been asked many times but none of the queries I used brought up a similar question. My issue is that I recently spent a lot of time annotating a detail view with leaders attached to geometry, leaders not attached to geometry, and sketches constrained to geometry projected from the view.
I made some modifications to the model which didn't re-locate any of the components that I'd annotated, but somehow the detail view got shifted, and all of my leaders are pointing to the wrong place and the parts of my sketch that weren't constrained to geometry are in the wrong place as well. Some of the leaders seem to have held to their posts better than others, but for the most part my annotations are worthless and will need to be re-done.
I am working with drawings that are based on files that have been replaced by new files of the exact same name but have been created from importing an completely different model as the base file. (not copied from originals, so not common 'objects')
I would like a workflow where I deferred updates on the drawing file before opening it.Open the drawing.Then run a vba script on the drawing file that would disassociate/orphan all annotations attached to the drawing views.I would then turn updates back on and set to work on reattaching each of the annotations.
There is no possibility of auto-reattaching that I know of because of the files being created from importing a third party model into inventor as the solid for the drawing's views.
I know this discussion title is a bit murky, but the problem is a bit odd. I have Photoshop CS6 v13.1.2. In this version, I will activate the Select Tool, check Auto-Select: Layer, check Show Transform Controls, and then while using the Select Tool I will drag to create a rectangle to select multiple layers with content within the specified area.
Unfortunately, this action only works when I begin the selection from outside of the canvas area. If started from within the canvas area, no rectangle will appear, it will show me a measurement of my selection size, and then no layers will be selected upon release.
This cannot be working as intended right? I mean multi-select dragging cannot be intended to only work when started outside of the canvas right? Is there some way to fix this issue? Is this a bug? See the images below for more information on this issue.
When I try to create a table from line tags, I can do it if I select them each individually. But I cannot accomplish selecting the line tags by "windowing", as it will ask me if I want to turn ALL line labels into tags first, which I do not wish to do.
For a curve table, windowing works very well.
Is there a trick to selecting your line tags by window?
C3d 2010 (no SP)
Win7
Using 2012. On pre-07 versions I've used, I could change the style of all dimensions in a drawing by selecting all entities (or using window selection) and then selecting the new dimension style from the combo box, regardless of what layers or entities were selected. Any dimension within that selection gets changed to the new style selected. In 2012, if I select any entity that isn't a dimension, no dimensions styles appear in the combo box, and so this method doesn't work.
Is there some new setting preventing this from working?
When trying to select entities with a window or crossing polygon (and hitting enter) there are no grips showing to indicate that the selection has been completed even though the entities seem to be highlighted. Syntax: select, enter, wp, enter (draw polygon), enter.
I am a part time user of this wonderful program and only recently moved to 2010 and yet I cannot figure out what I am doing wrong. I have Googled and looked in my texts and still am having difficulty (also attempted to search FAQ on this site but the link malfunctioned).
When you select similar using autocad it select similar in entire drawing. What i want is i am able to select similar using the same setting of selecting similar but with window selection instead of entire drawing ?
View 6 Replies View RelatedWhen creating a Parcel Line Table, C3D will not select tags by style or window. Only direct pick. I have a fresh install with no other bugs. [URL]...
View 3 Replies View RelatedIs there any way to open a new window of your model that is not inside the main window of inventor?
I have two monitors and would like to be able to have another window / view open on the other monitor.
Is there a way to open more than one acad drawing without having to open multiple acad windows? Sort of like word. You only have one window open and you can toggle between many files.
I have acad 2004.
No matter what command i try in autocad (move, erase, copy, etc)..i can only select one item at a time. When i choose one item it goes dashed (as they normally do), but when i click the second item the first one i chose goes back to solid and if i press return only the second item i selected if affected. Similarly if i choose 3 items , it forgets the first two and only keeps the third one.. Is this an Autocad options thing or a windows Mouse thing?
View 8 Replies View RelatedIs there a way to select all the layers in the Layers Window? is: I've got a GIF animation that's comprised of 590 individual layers, and to work on specific layers, It'd be convenient to be able to hide all the layers other than the layer I'm working on - maybe with a dialog under Layers>>Stack>>Select all Layers>>Hide, or an "eye" checkbox at the top or bottom of the Layers window that would select all layers, thereby allowing me to "unhide" the selected layer by checking the "eye" ,(show), checkbox of the relevant layer.
Currently, the only way I know of to work on a specific layer within such a stack is to move the layer to the top of the stack so it becomes the visible layer, perform the work, then return the layer to its original location.
why Autocad 2012 opens one window per drawing as opposed to Autocad 2007/2008 opening one window for as many drawings as you have open. (I also don't care to group/ungroup similar programs through Windows 7.) This must be an Autocad 2012 program default that I can't figure out to change.
View 9 Replies View RelatedI've been having trouble selecting more than one object with the pointer. the program was just reloaded on the computer, but this problem has happened multiple times now. everything will work fine for a while, then suddenly, when trying to select objects during a command, i can only select one. (ex. trying to copy multiple lines, i can only select one to copy at a time).
View 9 Replies View RelatedI have a lot of polylines that are all over a drawing from an outside source. Unfortunately the only unique properties about them are:
AREA = .14 sq in
PERIMETER = 1-11/32"
Everything is on the same layer, color by layer and are at the same elevation.
Any way to select just these closed polylnes? I tried quickselect but the AREA option did not work (it wouldn't except just the .14 value), and there is no apparent PERIMETER value to select.
Suddenly I can only select one item at a time. If I move onto another item, the first one de-selects. I haven't knowingly made any changes. What has happened and how to put it right? I can select multiple items via 'click and drag', but only within one drag - another drag then de-selects the first drag again.
View 9 Replies View RelatedImport fbx file of revit 2011 in 3ds max design 2012. I can't select the glass separate from the window frames.!
View 1 Replies View Related
