My annotations disappear when i replace an ipt with similar ipt in an idw file. The view and the browser update to the new part but the annotation disappear.
I am working with a front view in both ipts.
How to compare two similar solid model and found where its differetiate is, and how to compare two similar drawing let say rev.1 to rev.2 and found where its differentiate is?
View 1 Replies View RelatedWant to keep picture of house - but replace lawn with image of another nicer looking lawn(bottom pic).
View 5 Replies View RelatedAn image I imported contains an area with quite a few different, yet very similar colors (different shades of the same red). I want to change the complete area to one single red tone. What's the most appropriate approach to this? Especially without loosing the antialiasing at the edges that surround the area.
View 3 Replies View Relatedhow to replace a model reference in and Inventor 11 .idw file. - It seems this is something easy to do in Inventor 12 but I don't see how to do it in 11..
View 6 Replies View RelatedHow do I replace the model reference in a IPN file?
View 3 Replies View RelatedI need to rename and replace occurences in an assembly, then modify the occurence name.I rename and replace only Farme generator components, which is tested by <condiftion>.What I want to do :
- Num = ABC
- Original filename = toto.ipt
- New filename = ABC_toto.ipt, and Occurence name = ABC_toto
The code :
fileDir contain the file path
docFName contain the original file name (for example, toto.ipt)
Num contain the prefix to add to the name and the occurence name (for example, ABC)
If <condition>Then
New_name = fileDir & Num & "_" & docFName
Call oFileNameOcc.SaveAs(New_name, True)
Call oOccurrence.Replace(New_name, False)
oOccurrence.name = Num & "_" & oOccurrence.name
End If
The problem is, the first time I use the macro, the prefix is added twice in the occurence name (the filename is ok) : I obtain ABC_ABC_toto. This happen only the first time, and only on an orrignal Frame Generator assembly.
If I use the macro again, with for example Num = 123, the result is : 123_ABC_ABC_toto.Where is the problem ?
I made a complex drawing.
Now i changed the part file just a little, the placement of a few holes, and saved it to a new name.
I need both versions.
In the Design Assistant i copied the drawing file to a new name.
Now i want, in the design assistant, to replace the file the drawing refferences, but can't, the replace option is greyed.
I understand there might be larger changes, is that the reason?
I have some code to replace the current title block with a title block from a template file. I just don't like how it adds a new title block definition named "copy of titleblock". I'd like to delete or replace the current title block definition so only the newly added one is listed.
Sub test() Dim odrawdoc As DrawingDocument Set odrawdoc = ThisApplication.ActiveDocument If (odrawdoc.DocumentType <> kDrawingDocumentObject) Then Exit Sub Dim oTemplate As DrawingDocument Dim oSourceTitleBlockDef As TitleBlockDefinition Dim oNewTitleBlockDef As TitleBlockDefinition Dim oSheet As Sheet Set oTemplate = ThisApplication.Documents.Open(ThisApplication.FileOptions.TemplatesPath & "template.idw", False) Set oSourceTitleBlockDef = oTemplate.ActiveSheet.TitleBlock.Definition Set oNewTitleBlockDef = oSourceTitleBlockDef.CopyTo(odrawdoc) ' Iterate through the sheets. For Each oSheet In odrawdoc.Sheets oSheet.Activate oSheet.TitleBlock.Delete Call oSheet.AddTitleBlock(oNewTitleBlockDef) Next oTemplate.CloseEnd Sub
I'm just being picky at this point, but I don't want a buildup of title block definitions. We reuse drawings all the time which is why a simple method of updating a title block would be nice. I can just imagine in some years time after a title block update or two there are 20 "copy of copy of copy of .................. titleblock" listed in a drawing file.
Is there a way to prevent losing annotation in drawings if you make a minor change in the model. For example if you change the size of a W beam you lose all the welds and text associated.
View 1 Replies View RelatedWith "Select Annotations" I can window select multiple annotations at once. Why can't I window select bodies, features, or face and edges? AutoCAD, NX and Solidworks can do it. Do I have to change a setting somewhere?
View 1 Replies View RelatedI have a coworker who opens an Inventor 2014 (Inventor .dwg) drawing in AutoCAD Mech 2014 and only the views show. No annotations, titleblock, or border. If I open the same drawing in my AutoCAD Mech 2014, the drawing appears correct. Both have service pack 1 applied to Inventor and AutoCAD 2014...
View 7 Replies View RelatedI am looking for how to use iLogic to Auto Re-attach Orphaned Dimension.
Core i7-2630K
12GB dual channel Corsair XMS3
Nvidia quadro 2000
128 vortex 2 SSD
WD 7200rpm Black
Asus P8P67 DELUXE
Product Design Suite 2012 Ultimate
I'm sure this has been asked many times but none of the queries I used brought up a similar question. My issue is that I recently spent a lot of time annotating a detail view with leaders attached to geometry, leaders not attached to geometry, and sketches constrained to geometry projected from the view.
I made some modifications to the model which didn't re-locate any of the components that I'd annotated, but somehow the detail view got shifted, and all of my leaders are pointing to the wrong place and the parts of my sketch that weren't constrained to geometry are in the wrong place as well. Some of the leaders seem to have held to their posts better than others, but for the most part my annotations are worthless and will need to be re-done.
I am working with drawings that are based on files that have been replaced by new files of the exact same name but have been created from importing an completely different model as the base file. (not copied from originals, so not common 'objects')
I would like a workflow where I deferred updates on the drawing file before opening it.Open the drawing.Then run a vba script on the drawing file that would disassociate/orphan all annotations attached to the drawing views.I would then turn updates back on and set to work on reattaching each of the annotations.
There is no possibility of auto-reattaching that I know of because of the files being created from importing a third party model into inventor as the solid for the drawing's views.
i am working on writing a lisp to update several similar drawings through a .bat file. One of the things i would like to do is to automatically increase the revision number by one. I have figured out everything except how to select the text. Looking at the database, the coordinates for the revision number are (10 15.2908 0.0295 0.0). However, (setq a (ssget "x" '((0 . "TEXT,MTEXT")(10 15.2908 0.0295 0.0)))) returns nil.
If each drawing's revision number is not in the exact same location, is it possible to select by a range of coordinates? Using (getpoint), the range is from (15.5 0.0 0.0) to (15.1805 0.1409 0.0).
I am writhig a macro to put text ( count number) under each occurrence in an assembly.
I got the Sequence correct and able to place the cnumber un drawing sheet.
But What I need to do is to place that number under consequent occurrence.
find the Image file and you will see wht i am trying to get.
i am icluding the Macro i written as well.
Private Sub RHSnumbering()
Dim oDrawingDoc As DrawingDocument
If ThisApplication.ActiveDocument.DocumentType <> kDrawingDocumentObject Then
[Code].....
I have a .stp file that I am trying to dimension on a drawing. There are about 100 or so lightening pockets that are all the same basic shape (a rectangle with a full round on the ends). As of now I have been manually making a table for each location. Is there a way to create something like a hole table to automatically capture the locations of the pockets and create a corresponding table? I know I can create a centermrk on the round portions to use with a hole table but I want to dimension from the center of the pockets for the table.
View 5 Replies View RelatedThis seems to be happening to large files in general, but happens more often when saving down from CS6 to CS3 (for preflighting). The files will save, then throw this error when re-opening. The preview of the file in the Finder will disappear and the file becomes useless. We are on Macs running 10.6.8 and Illustrator CS6 (fully patched).
View 7 Replies View RelatedIs there a way of using design accelerator to rivet fix as you would with bolted connection ? I know that by initiating the bolted connection command there is no option to use rivet to complete the connection as is done with bolts. It would be great if rivets from the content centre could be somehow imported into the bolted connection component generator (or readily available) to add like bolted connection or if there are any 'workaround's' to produced similar results ?
View 1 Replies View Relatedi have a csv file that has 6 columns, PNEZD and a 6th column which is my notes..i type a star in the data collector after my code, make my note, and then find/replace after i export it and replace star with a column..that gives the desired 6th column in excel that my boss wants....problem is he also wants to see that next to the Full Description in Civil 3d 2012...i tried adding a Point File Format with a 6th Column, User Defined, String for type...named the column Notes...but if i go to edit the point there is no 6th column in the Tool Palette.
View 1 Replies View RelatedIs there a way to convert an Inventor 2012 view scale from "0.5" to "1:2" or similar within an iLogic rule? I can extract the main view scale and plug it into a variable but the format isn't correct for the drawings I'm creating.
View 2 Replies View Related"Find" command gives me a dialogue box. Then everything falls apart.(program stops). Have not found any samples except VBA and lisp files. I want to use only "script" files.
View 0 Replies View Relatedis there a way of find and replace tab names in one drawing file? one file with six tabs named 001 rev A, 002 rev A etc. i would like to change all the "rev A" to "rev 0" with out going into each tab seperatly and changing them.
View 2 Replies View RelatedPhotoshop generator nice to have features for future roll-out would be: Check box or similar for transparent PSD file to generate the whole canvas area, not just the image area.The ability to generate to a specific folder, including on a networked drive within a shared environment.Ability to generate to no folder at all, place in the same location that the PSD file is located Ability to generate an animated GIF.
View 2 Replies View Relatedwhy my drawing on illustrator won't export at maximum resolution when a nearly identical drawing can.
View 2 Replies View RelatedWe're using Inventor to model complex bridge structures. We take sections, plans, elevations etc. from the model to AutoCAD.dwg format. We then open the .dwg and insert the view blocks in model space, these files are then used as xrefs in AutoCAD, long winded but a supply chain requirement.
The models and xrefs are all saved on our network, no vault used, no windows syncing.
To create the sections we have a separate part file that contains sketches where we want the sections taken, this is placed in our assembly. The sketches are all straight lines (no cranks) and included in the .dwg and selected to create the sections.
We're experiencing a significant number of files that when we open to update the model views we randomly get an error "valid section line not found" and several of the sections disappear. The section lines part file is fine, the section lines are all still there and unchanged.
Settings: Inventor 14 - Student version / Window 7 64bit
When I save parts in the library on my harddrive the file does not show subsequently. But if I try to re-save it, I get the statement that the file already exist.
I cannot find the file anywhere, not even with the windows search function. The file is missing, but somehow present below the surface.
Besides this did Inventor create several versions of my previous parts (0001, 0002, 0003... etc.)
when i am trying to edit a part in a assembly all the other parts disappear and make it hard to project geometry that is not there.
View 1 Replies View RelatedThe attached IPart works wonderfully for all sizes, shows no errors or recovery alerts.
The problem is that once it is published, the ORB end changes for any size 1/2" (8) or under.
It just turns into a Hex head, I don't understand what the problem is.
When I zoom in on a drawing, certain parts of the drawing will just disappear. Dimensions, title block, text...it doesn't matter, its different every time. It's not all the time but when it happens it's frustrating. Try dimensioning a part that isn't visible! When I zoom out to a full page view it always returns. When I zoom in again, parts will disappear. See attached screen captures and you will see the same file at different moments.
View 3 Replies View Related