When I try to create a table from line tags, I can do it if I select them each individually. But I cannot accomplish selecting the line tags by "windowing", as it will ask me if I want to turn ALL line labels into tags first, which I do not wish to do.
For a curve table, windowing works very well.
Is there a trick to selecting your line tags by window?
C3d 2010 (no SP)
Win7
When creating a Parcel Line Table, C3D will not select tags by style or window. Only direct pick. I have a fresh install with no other bugs. [URL]...
View 3 Replies View RelatedIs there any way to get Revit window tags to behave like the door tags? The door tags seem to be instance parameters while the window tags are type parameters. I would like to use separate numbers for each window even though they are the same type. This would allow me to specify header required for each window in the schedule. I understand that I could edit the window families and save them as different files but this is time consuming. Is there an easier way?
View 3 Replies View RelatedI accidentally turned something on in Autocad, and I want it to go away, I have no idea what it's called or how to get it gone. It's akin to the "select other" window in Inventor when you select at the intersection of several objects.
How do I make this go away?
I opened a view drawing where I had placed the window tags and many of them had moved either X or Y from where they had been placed. When I say moved, I don't mean a little. Some of them moved 540 FEET! What would cause that?
View 1 Replies View RelatedJust moving over from Drawing Express to AutoCAD LT and I am looking for a command that will allow me to number windows and doors easily. Currently I have a command in drawing express that increases the door number each time I paste it to allow easy door/window numbering with a prefix. We tend not to create window or door schedule from these we just need to be able to number them quickly without editing the text manually each time.
View 4 Replies View RelatedI made a complex sketch, and want to extrude.When i want to select the whole sketch, i position the mouse on the upper left of the screen and drag down and right, but no window is created.
And i cannot add segments to the selection, even with pressing SHIFT, because immediately after the first is selected, it is extruded.you see on the picture i attached that some segments (in red) are connected. how can i connect all the sketch together, so when i will select it everything is selected.
I have seen selection filter and apply selction of faces and edges.
I want to leverage this further. In a part, is it possible to simply drag a window and have inventor select all faces?
Inventor Professional 2013
Vault Collaboration 2013
With "Select Annotations" I can window select multiple annotations at once. Why can't I window select bodies, features, or face and edges? AutoCAD, NX and Solidworks can do it. Do I have to change a setting somewhere?
View 1 Replies View RelatedUsing 2012. On pre-07 versions I've used, I could change the style of all dimensions in a drawing by selecting all entities (or using window selection) and then selecting the new dimension style from the combo box, regardless of what layers or entities were selected. Any dimension within that selection gets changed to the new style selected. In 2012, if I select any entity that isn't a dimension, no dimensions styles appear in the combo box, and so this method doesn't work.
Is there some new setting preventing this from working?
When trying to select entities with a window or crossing polygon (and hitting enter) there are no grips showing to indicate that the selection has been completed even though the entities seem to be highlighted. Syntax: select, enter, wp, enter (draw polygon), enter.
I am a part time user of this wonderful program and only recently moved to 2010 and yet I cannot figure out what I am doing wrong. I have Googled and looked in my texts and still am having difficulty (also attempted to search FAQ on this site but the link malfunctioned).
I am unable to select Sketch geometry via a crossing window to project to a new sketch.
While in the new sketch if I select " Project Geometry " I am only able to select one line at a time. quite tedious for some of my larger projects.
I can not honestly say that this feature was available in previous releases but it seems to me it was. Am I missing a variable somewhere?
as title if I need to select one by one，it will be too slow....Should this function be accompolished by LISP? But I am not familiar with LISP.... the situation is that I have many irregular lines distributed in disorder, and what I want to do is just lengthen these lines "3.5" Meters from the start point of each line.
If I can do this way , then I can join the line to some points correctly in Arcmap.
When you select similar using autocad it select similar in entire drawing. What i want is i am able to select similar using the same setting of selecting similar but with window selection instead of entire drawing ?
View 6 Replies View RelatedHow to start back to curve & line tag number 1 after generating tags?
During Parcel creation I told it to apply curve tags and it did what it said, created curve tags. Never again until I get comfortable with it. Looks great but want to have some order here. It's really random. I know it's not LDD but in LDD you could clear tags and start over. How to do this in 3D? From what I understand even if you do not display tags they are still created right? So where do I set the default starting number? Settings > Parcel > Commands > CreateSite?
My labels are only displaying as tags. How do I get them to display as bearing and distance again?
View 3 Replies View RelatedMy curve labels keep skipping. Why do they keep skipping from C6 to C9? I know how to use the renumber tags command. It just keeps skipping C7 and C8 for no apparent reason. There are no tags on frozen or off layers. When I add all possible objects to my curve table it does not change.
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
Is there a way to select all the layers in the Layers Window? is: I've got a GIF animation that's comprised of 590 individual layers, and to work on specific layers, It'd be convenient to be able to hide all the layers other than the layer I'm working on - maybe with a dialog under Layers>>Stack>>Select all Layers>>Hide, or an "eye" checkbox at the top or bottom of the Layers window that would select all layers, thereby allowing me to "unhide" the selected layer by checking the "eye" ,(show), checkbox of the relevant layer.
Currently, the only way I know of to work on a specific layer within such a stack is to move the layer to the top of the stack so it becomes the visible layer, perform the work, then return the layer to its original location.
Curve tags number okay but the line tags keep numbers when curves are in between. Happens in both 2011 and 2012.
View 1 Replies View RelatedImport fbx file of revit 2011 in 3ds max design 2012. I can't select the glass separate from the window frames.!
View 1 Replies View RelatedWhy won't my welcome window show initially even when I select it to do so?
View 3 Replies View RelatedI want to do rectangular selection (window select) couple of clips. So i try to click and drag (start from any empty area in timeline), but most of the time , i will end up picking up or moving the empty track (gap). In any other editing app , i can simply click and drag but not in Smoke. Yes, i have to click in specific area in the timeline so i can properly create a window selection .
View 9 Replies View Related(defun CELBLKS ( / e blk ss blkl)
(setq blkl "" ss (ssadd))
(while (setq e (entsel "
[Code]....
i have this lsp, it works great but how can modify it if i want select with a window.? exemple: if i have 3 differentes blocks, i want to select them with windows and the lisp select all blocks that are identical of those 3.?
I'm using Organizer 11. First time evething was ok, persons/faces were detected correctly, then after a few month Organizer doesn't detected new faces and said every time that all faces were detected already also when I imported new fotos from my camera...
(I use the german version, so I can not tell you the exact error message in english, hope you unserstand what I mean.)
As I found no solution, I created a new catalog and imported all photos including their tags newly to this empty catalog. But allready tagged persons are not persons anymore - their tags are now in the "imported keyword tags" (German: "Importierte Stichwort-Tags") and not in the "person/face tags".
How can I tell the organizer that the imported Tags are persons/faces to having no douplicates in the person-tags and normal keyword-tags?
Here some Background Information about my system:
PSE 11, Windows 8, 64 Bit 8GB, Intel i7.
3 catalogs with each 8000-10000 photos.
I have just upgraded my Swedish PSE7 to an English PSE11. Of course the people keyword tags did not get converted into people tags because People is called Folk in Swedish. I was not aware of this mechanism prior to upgrading. How can I convert those keyword tags now?
View 2 Replies View RelatedI just converted from PSE 10 to PSE 11.
Now, in the Media view, over in the Tags/Info pane, I have Events, Other, and Places Tags, but no People Tags. However, when I look at individual photos in my converted catalogs, the people's names are still attached to them; the people icon is still associated with each photo so marked.
In PSE 10, when you imported new photos, you could drag People Tags from the Tags pane to one or more selected photos to quickly tag the subjects. Now, apparently, I'll have to group any new photos with people in them by hand and retype names over and over again — although those tags are already available in the catalog.
This is clearly insane. Surely Adobe hasn't taken something easy (dragging a people tag over from the right pane to a newly added photo) and turned it into something cumbersome and inefficient?
How do I get the Media view to populate the People Tags in the Tags pane along with the Existing Events, Other, and Places Tags?
When Civil 3D 2013 came out I downloaded it and installed it. I imediately discovered that when selecting my window during plotting by window, if I zoomed or panned I would not be able to pick any points and would have to hit escape SEVERAL times to get it to exit out of the selection command. AutoCAD Civil 3D 2013 Hotfix 1 solved the problem and all was good.
When our office decided to all move to 2013 last month (DEC 2012) I installed it on the workstations then installed the AutoCAD Civil 3D 2013 Service Pack 1 skipping the hotfix. I assumed it was included (WHICH IT STATES THEY ARE IN THE README). Sadly I was wrong because we are experiencing the same issue all over again. All of our workstations that installed 2013 and then SP1 without installing the Hotfixes.
I have tried to install Hotfix 1 on these workstations but it doesn't install on the SP1 version AND there is no way to uninstall SP1 without uninstalling Civil 3D all together.
We need this to get fixed sooner than later because it is a major hassel to lock up everytime we go to plot.
it does not showing command window in civil in 3D 2011 after installing first time.How can i get it?
View 5 Replies View RelatedThis has been happening using C3D 2014:
Sometimes when I start C3D and hit F2 to open the text window it just flashes very quickly and won't stay open. Usually I will run a few other commands and then it will work properly. This only happens when I initially open the program.
About half the time, when I display the text window, it's more or less locked. I can't scroll, I can't click the "X" to close the window, I can't resize it, I can't move it, etc. All I can do is click back in the main AutoCAD window, which brings it to the top and continue working. The text window stays active and in the taskbar until summoned again - until that session of C3D is closed. (It does still reflect the current command status)
Other times, the text window acts normal. There is no obvious difference between when it acts up and when it doesn't. IOW, I'm always running the same profile, same workspace, the command line is always docked, other palette configuration is the same.
I cannot seem to actual select or add to Selection Set using the Select --> CP/WP option.
The objects are highlighted but not selected. Therefore I cannot change the color for all the objects example.
I follow these precise steps (in the link) and end up with highlighted items but not "selected" items. The final enter command actually de-highlights to objects.
It works if you start with a modify command first such as move, and only then perform the CP/WP but that doesn't appear to be the case in the video. It would really good in the end, the objects are actually selected with anchors in which i can do other things then modify.
[URL] .......