About half the time, when I display the text window, it's more or less locked. I can't scroll, I can't click the "X" to close the window, I can't resize it, I can't move it, etc. All I can do is click back in the main AutoCAD window, which brings it to the top and continue working. The text window stays active and in the taskbar until summoned again - until that session of C3D is closed. (It does still reflect the current command status)
Other times, the text window acts normal. There is no obvious difference between when it acts up and when it doesn't. IOW, I'm always running the same profile, same workspace, the command line is always docked, other palette configuration is the same.
Sometimes when I start C3D and hit F2 to open the text window it just flashes very quickly and won't stay open. Usually I will run a few other commands and then it will work properly. This only happens when I initially open the program.
Just switched to 2012 from 2010. When I try to edit the description format field in the properties window of a selected cogo point, I can't type in caps, it's all lower case. If I right click and edit the point, I can use capital letters, however. (running C3D 2012 sp4, Win7 64bit, 8GB)
Just recently, upon closing PSP x5, a message window pops up, the title area usually references using the e-learning center or "Explore more ways to learn and love photography", but the window itself is empty except for the message "Do not display this message again" with a checkbox and a Close button. The Close button does not work, nor does the red X close window button. I have to go into Task Manager to finish closing the program.
I'm on a Windows 8 machine and this just started happening after months of use.
Each time I open a second or third file in CorelDraw x5, the windows seem to lose the top MIN, Max Close icons. You know the ones that sit at the top right of each window. Because of this I'm unable to close or edit the work. In fact NOTHING works. I'm running Windows 7 64 bit with a TON of memory.
I have an iLogic that runs to create parts and assemblies. These parts and sub-assemblies are for a range of library components which are either part(s) or assemblies or and assemblies composed of parts) and sub-assemblies as well. This iLogic is mostly done despite I have limited knowledge in this area. At the beginning it opens a text file (.txt) by the command line:
ThisDoc.Launch("L:\_Nov 02Info and Input GuideLines.txt")that offers guidelines and instructions.
I would like to how can I close (exit) this text file at a point within or end of the current iLogic because, it opens a several files of the same every time I run the iLogic otherwise.
When I click on an object to retrieve it's extended data, the data keeps writing to the right, it does not return to the next line, when the text approaches the end of the screen. Very difficult to analyze information.
Why my 3D view gets cliped when zooming close to an object? I have tried the clipping planes and it says they are off. I have also tried them turned on with the same result.
I'm to compare volumes in c3d to Inroads. My volumes are not matching ( cut and fill are not even close). Civil 3D uses the average end area and InRoads uses 'triangle method' to calculate the total volume. How can I get C3D volumes to match InRoads which is verified correct?
Whenever I open the Volumes Dashboard in a drawing and then close it, my cursor and my WCS compass start blinking erratically, and the program seems more apt to freeze up when I try to do other things from that point on, especially if I try to move to a drawing in another tab. If I bring back the volumes dashboard, it's fine again, but then I've got the annoying outlining of my volume surfaces that I don't want. how to handle this? Is it just an unavoidable glitch in the program?
When I click on an object to retrieve it's extended data, the data keeps writing to the right, it does not return to the next line, when the text approches the end of the screen.
I used the function paste to combine three surfaces in one. It could represent a highway. I noticed that when surfaces cross or pass close to each other some extra triangles show up trying to stitch together the surfaces. I can not find an option that can stop this, eg "not create extra triangles". Why these extra triangles occur? Can you limit it?
when i try to use marquee tool by clicking on it Photoshop cs6 closes or I see an error message and then it closes? text tool causes the same problem? im using xp sp3.
I had several CorelDraw documents that crashes on me, and the auto-backup did not work.
In all these documents, if I open the text paragraph window and typed on it, the entire program will crash if I exit that window after finishing.
I discovered that if I typed directly on the text paragraph, it will not crash. That means do not open the text paragraph window to do editing. But this makes editing very slow since it seems to be more memory intensive.
Strange the auto-backup directory/folder always do not have my backup files too.
As the above mentioned, I have a drawing drawn using polylines with width from someone. The width of the line are suppose to represent area,
To put things into prospective, here is an example:
The polyline is 10 unit long and with a width of 2 unit wide. If i explode that polyline, it will become a single polyline without width. The line are suppose to represent 10 unit long and 2 unit wide; representing an area.
My question is is there a way to change the line above directly from polyline with width to a close polyline (4 x polylines) of 10 unit long and 2 unit wide.
When I run my VBA routine from the VBA editor, the command appears in the text window of AutoCAD the way it should, but when I run the routine with the VBAload - VBArun commands (automated on a toolbar button), it does not. Do I need to obtain the AutoCAD object and issue commands that way instead of using the thisdrawing.utility method?
I know that the (graphscr) command will change the focus of ACAD from the text window to the graphics screen, but is there a command line option to actually turn off the text window?
I can press F2 to open the AutoCAD Text Window, but I'm looking for a reliable way to close it once it's open. If it's not overlapping with AutoCAD, F2 doesn't close it. I currently have it on a monitor other than the monitor AutoCAD is on.
Is there a system variable I can use to setup a LISP to toggle (or at least close) the Text Window using a keyboard shortcut?
I made a prompted entry, for example, in a sketched symbol,again, for example.
Now i edit the text and want to write a static text, not a prompted entry and none from that list, but i cannot get the empty, white, window, like in the picture, and like when i start a new text.
I must have hit some combination of keys which altered my interface because Autocad 2013 is acting slighly differently. I can no longer pick Dtext and change its contents directly but must go into the properties tab and change the text through the properties window. When I pick an object my layers scroll windo no longer identifies the objects layer. And when I right click an object I no longer have access to the same set of command that I used to. For example I used to be able to right click an XREF and have the command xclip available but that and other specific commands are no longer available. I am on a deadline and am not able to figure out what is causing this sudden unexpected change in the interface.
When Civil 3D 2013 came out I downloaded it and installed it. I imediately discovered that when selecting my window during plotting by window, if I zoomed or panned I would not be able to pick any points and would have to hit escape SEVERAL times to get it to exit out of the selection command. AutoCAD Civil 3D 2013 Hotfix 1 solved the problem and all was good.
When our office decided to all move to 2013 last month (DEC 2012) I installed it on the workstations then installed the AutoCAD Civil 3D 2013 Service Pack 1 skipping the hotfix. I assumed it was included (WHICH IT STATES THEY ARE IN THE README). Sadly I was wrong because we are experiencing the same issue all over again. All of our workstations that installed 2013 and then SP1 without installing the Hotfixes.
I have tried to install Hotfix 1 on these workstations but it doesn't install on the SP1 version AND there is no way to uninstall SP1 without uninstalling Civil 3D all together.
We need this to get fixed sooner than later because it is a major hassel to lock up everytime we go to plot.
When I try to create a table from line tags, I can do it if I select them each individually. But I cannot accomplish selecting the line tags by "windowing", as it will ask me if I want to turn ALL line labels into tags first, which I do not wish to do.
For a curve table, windowing works very well.
Is there a trick to selecting your line tags by window?
I am working on creating various standard sized window elevations using dynamic blocks. Each window elevation needs to have text underneath it that tells you the unit size of the window. While I have successfully created all the various elevations using dynamic blocks I can't figure out how to make the text appear to change with the various window unit sizes. for instance I have a small window that has text underneath showing 1818 (18"wide x 18"high). I need text to change to say 1820, 1824, 1830, etc. I can get the 1818 text to stay centered under the elevation as the window gets wider/higher but that is it.
how to move the window around with the arrow keys and I just can't find it. A little box popped up in the upper left hand corner that allowed you to move the drawing window around to find a hidden dialog box.
In 2013 Civil 3d I am having the issue that when I select the Add/ Delete scales the cursor changes to an arrow and the program waits. If i hit the exscape key it goes back to normal. My best guess is the dialog box is popping up behind the drafting window.
Civil 3D 2013 HP Z400 Workstation 6GB of RAM 296GB HDD ATI FirePro V5700(FireGL) Win 7 Home Professional
how to create a basic door and a window. I know it's easy, but I'm new to AutoCad. I'm taking a class, and I know that we use the W (Write Block) command and the I (Insert) command. I think that I have to know how to take the dimensions for a door and window and create them.
Civil 3D crashes when I open the Layer Properties window. What is the best way to fix this issue? Will the standart AutoCAD 2011 1.1 and 2 updates work?
How to label all lines in one go (window selection)?
Is there a way to label all the lines in one go by using the “window selection”? why the current behaviour of the selection requires to select the lines one by one?
How to remove the (‘) that appears at the end of each label? Is there an icon for the “add lables” command on the ribbon? Why the command “_AeccLblDlgGeneralNote” is not defined on the command line?
