AutoCAD Civil 3D :: Linecode - Cannot Get Radius To Close At One Of Curbs
Jun 7, 2013I have attached a plan view of a small curb and gutter. What is wrong with the linecode I can not get the radius to close at one of the curbs
View 5 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Adding Retaining Walls And Curbs To Surface?
Nov 9, 2013I am having a lot of trouble adding retaining walls to my surface. I also have to add the curbs of parking lot.
I already have the surface. However I need to tell Civil3D to stop the contours at the retaing walls and not to try to tie them in to anything else. The closest I got was using wall breaklines and I got the top of the retaining wall to have the desired elevation. However, all the contours going to the retainig wall try to go around it and tie in to something else. This ends up creating weird contours and crazy slopes.
Now for curbs, how do I tell Civil3D to jump 6" when it reaches the curb line?
AutoCAD Civil 3D :: Create Assembly Consisting Of Two Curbs Subassemblies
Jun 7, 2012I'm trying to create an assembly that consists of two curbs sub-assemblies that are tied to independent alignments with a pavement section in between them. I have been successful in actually creating an assembly with the two curb sections, but I cannot figure out how to define a line or pavement section that will connect one gutter to the other.
I have one curb tied to the main baseline and the other tied to an offset. I have assigned horizontal alignments and profiles to the baseline and the offset. The curbs actually place where I want them when viewed with the section editor. I had thought that I could use the LinkToMarkedPoint subassembly and simply attach it to the gutter of one curb and to a marked point on the gutter of the other curb, but I can't get it to actually work.
Again, the curb alignment and profiles are completely in independent one another, and I need a way to define a pavement section (or just a surface) between the two gutters.
AutoCAD Civil 3D :: SAC - API Class For Radius?
Nov 22, 2012I am working on custom subassembly and I would need different scenarios for different radiuses along the alignment. Is there a way how to find out this current value?
View 2 Replies View RelatedAutoCAD Civil 3D :: Get Grading To NOT Radius Out In Corner?
Feb 21, 2012I'm grading this pad site from EL.215 to EL213 at a 2:1 slope. I use "grade to elevation" but I don't want the corner to fillet. I need the grading to fill in to the retaining wall (red line). I tried using infill but I can't get the fill slope display to show up.
View 9 Replies View RelatedAutoCAD Civil 3D :: Change Minimum Radius Table
Apr 26, 2013How can I change the minimum radius table if Autocad Civil 3D only have as a minimum 4%?
And I need to use as a minimum 2%. see attached picture.
AutoCAD Civil 3D :: Labeling - Arc Using The Angle Rather Than Length Or Radius
Sep 4, 2012Just started a drawing in C3D 2013 using an existing template. If I draw an arc using the "Angle" rather than length or radius, entering the angle as 11.1601, then label the arc, the delta angle is converted to hms or 11.0936 . The template and labeling style are ones we've used for several releases. I've compared the feature settings, units and the curve labeling command and can not find where this is being changed.
View 8 Replies View RelatedAutoCAD Civil 3D :: Specify Value Of Radius (R) WHILE Drawing Horizontal Alignment?
Aug 11, 2013How to specify the value of radius (R) WHILE drawing the horizontal alignment?
I’m wondering if there is a way to specify the value of radius (R) while drawing the horizontal alignment.
For example, the value of deflection angle can provided while WHILE drawing the horizontal alignment by typing ‘dd (attached). Is there a way to specify the value of radius (R) while drawing the horizontal alignment?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD Civil 3D :: Minimum Curve Radius For CAT777F At 30km/hr
Dec 16, 2013minimum turning radius of cat 777f at 30km/hr? need to figure out the horizontal curves to use for this.we have been using 60 to 100m curves but i think it maybe smaller. small curves works with these steep terrain.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
AutoCAD Civil 3D :: Get ONLY Radius Or Spiral Value On Geometry Points Labeling?
Sep 12, 2013I know I can use "<[Geometry Point Entity Before Data(CP)]>" (or after...) .
But this text is tooooooooo long.
Is there any way to get only the :
- radius - length of segment. or - Spiral A ???
Maybe using expressions? In this case any hidden elements?
I know I can use segments or multiple segments but I want to do the work in only 1 labeling step ...
AutoCAD Civil 3D :: Polyline Offset Adds A Radius Fillet?
Apr 15, 2013What settings has changed to make any polyline I offset to add a radius fillet to it. See attachment
Civil 3D 2013 (SP1)
Dell T3500
Win 7 Pro X64
Intel Xeon 3.2 GHz
24 GB ram
NVIDIA Quadro 4000
AutoCAD Civil 3D :: Make A Curve Label With All Its Elements (radius / Tangent)
Oct 10, 2012I want to make a curve label with all its elements (radius,tangent...) and the data of widenning and superelevation on the curve?. I attached the label that I want to create on C3D.
C3D 2012
Win-64 bits
AutoCAD Civil 3D :: Intersections 2010 - Change Curb Return Radius
Feb 24, 2012Changing the curb return radius after the intersection has been created. I am able to go back to the curb return parameters dialog and enter a different value, but once I hit Enter or OK the value reverts back to the one I orginally used.
So it looks like I have to delete the intersection object and re-start the wizard from scratch. Not that it's a big deal, just thought there might be a way to make the change once the intersection is built.
AutoCAD Civil 3D :: Association Between Design Speed (V) And Radius Of Circular Curve (R)
Aug 1, 2013The association between design speed (V) and radius of circular curve (R),
As the R is positively related to V according to the equation (attached), then I expect that the C3D changes R value as the value of V is changed.
For example, on the attached screenshots, the R value of horizontal alignment is built based on a design speed of 100km/hr. Now if the speed is changed to 50km/hr, then why the value of R is not automatically changed to be compatible with the new speed?
AutoCAD Civil 3D :: Labeling Radius And Spiral A Or Length At Geometry Points
Sep 11, 2013I'd like to view the parameters of my aligments elements near the geometry points. That is, the station and the radius value or spiral parameter (or what I want). I have explored the text & reference text but there is not R or A elements...
How is it possible ? C3D can detect the type of geometry poinr, so it would must to know R, Lenght,. A, etc....
In addition I 'd like to do it using the aligment label set.... sci-fi , isn't it ?
When you have to create plans, the aligments need to show a lot of information. Doing it manually is so boring..... (and in XXI century ...... )
Civil 3D (2013)
AutoCAD Civil 3D :: Change Radius To Degrees In Horizontal Geometry Band Set Profile
Sep 25, 2013How to set change the radius to degrees in horizontal geometry band set profile.
View 2 Replies View RelatedAutoCAD Civil 3D :: Random OK Button After Close?
Mar 28, 2013After I close C3D 2012 I get this button,
Why? It doesn't seem to be affecting anything, but it's annoying.
Any way I can get rid of it?
AutoCAD Civil 3D :: Can't Close Text Window
Jun 20, 2013About half the time, when I display the text window, it's more or less locked. I can't scroll, I can't click the "X" to close the window, I can't resize it, I can't move it, etc. All I can do is click back in the main AutoCAD window, which brings it to the top and continue working. The text window stays active and in the taskbar until summoned again - until that session of C3D is closed. (It does still reflect the current command status)
Other times, the text window acts normal. There is no obvious difference between when it acts up and when it doesn't. IOW, I'm always running the same profile, same workspace, the command line is always docked, other palette configuration is the same.
AutoCAD Civil 3D :: View Gets Clipped When Zooming Close To Object
Jul 10, 2012Why my 3D view gets cliped when zooming close to an object? I have tried the clipping planes and it says they are off. I have also tried them turned on with the same result.
View 1 Replies View RelatedAutoCAD Civil 3D :: Volume Calculation Method - Cut And Fill Are Not Even Close?
Sep 4, 2012I'm to compare volumes in c3d to Inroads. My volumes are not matching ( cut and fill are not even close). Civil 3D uses the average end area and InRoads uses 'triangle method' to calculate the total volume. How can I get C3D volumes to match InRoads which is verified correct?
View 5 Replies View RelatedAutoCAD Civil 3D :: Program Acts Funny When Close Volumes Dashboard
Oct 9, 2013Whenever I open the Volumes Dashboard in a drawing and then close it, my cursor and my WCS compass start blinking erratically, and the program seems more apt to freeze up when I try to do other things from that point on, especially if I try to move to a drawing in another tab. If I bring back the volumes dashboard, it's fine again, but then I've got the annoying outlining of my volume surfaces that I don't want. how to handle this? Is it just an unavoidable glitch in the program?
(I'm using AutoCAD Civil 3D 2014.)
AutoCAD Civil 3D :: When Surfaces Cross Or Pass Close To Each Other Some Extra Triangles Show Up
May 8, 2013I used the function paste to combine three surfaces in one. It could represent a highway. I noticed that when surfaces cross or pass close to each other some extra triangles show up trying to stitch together the surfaces. I can not find an option that can stop this, eg "not create extra triangles". Why these extra triangles occur? Can you limit it?
View 3 Replies View RelatedAutoCAD Inventor :: Radius Cut On Hex Nut?
Aug 21, 2012how to do a rwdius on a hex nut as shows in attached JPEG image. I am attaching my ipt file as well without radius.
View 2 Replies View RelatedAutoCAD 2013 :: Arc Without Radius
Jul 10, 2013Im trying to draw a series of segments using script. I'm trying to build a template in Excel using my coordinates along with the radius. The segments consist of arcs and straight lines. However, the sequential order of the arcs and straight lines vary from object to object.
Is there anyway to use the ARC command and have the radius be "0"?.
I understand, in principle, this is nothing more than a straight line. However, because of the varying placement of the straight lines within the arcs, it is almost impossible for me to achieve what I'm trying to do without constantly modifying my template to meet the object needs.
Are there any options to use the arc command while applying a zero "0" radius?
AutoCad :: Fillet With A Radius
Nov 12, 2012I'm having a problem with the fillet command using a radius, I can't seem to get a rounded corner. I have the radius set at 1.00. I should see a rounded corner. If I set it at 0.00 or 1.00. I get the same result. Something doesn't seem right! Could it be a setting.
I viewed a few videos on Youtube and I can't replicate the same filet with radius results. I watched one that you can select radius by right clicking mouse. A text box appears to the right of the cross hair cursor where you can input the radius. On my screen that does not come up.
AutoCAD .NET :: Fillet Two Lines With Radius
Dec 23, 2013I need to fillet below lines in .net...Iam having the entities list..How to fillet those lines with radius using .net?
View 2 Replies View RelatedAutoCAD Inventor :: Intersection With Radius
Oct 10, 2011We need to be able to use intersection with radius... In doing, it just snaps to the center not intersection.
View 9 Replies View RelatedAutoCAD LT :: How To Check Radius Of Polyline Arc
Oct 31, 2012how to check the radius of a polyline arc?
View 6 Replies View RelatedAutoCAD LT :: Put FILLET Radius In Polyline?
Jul 26, 2005Is there a way to put a FILLET radius in a polyline? (2D dwg)
e.g. a straight line crosses a radius, both lines trimmed off, turned into a polyline and joined using PEDIT.
When I try to put a FILLET radius between the straight line and the original radius, the command line quotes;`Cannot fillet polyline arc segements'
AutoCad 3D :: Extruding / Sweeping Through Radius?
Feb 27, 2012I have a complex polyline I'd like to extrude through a finite radius and distance that is not obvious in this old version 13 I have to use.
View 3 Replies View RelatedAutoCad 3D :: Flattening Out A Solid Radius?
Feb 12, 2012what is the best way to flatten out a radiused peice of sheet metal with holes in it. i know how to flatshot but how do I flatten this for laser cutting and shearing
View 9 Replies View Related