AutoCAD Inventor :: Intersection With Radius
Oct 10, 2011We need to be able to use intersection with radius... In doing, it just snaps to the center not intersection.
View 9 Replies
ADVERTISEMENT
AutoCAD 2013 :: Distinction Between Intersection And Apparent Intersection In Snaps
Sep 15, 2012What distinction is between “intersection” and “apparent intersection” in snaps,. I’m not sure what difference is between the “intersection” and “apparent intersection” in snaps.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD Civil 3D :: Create Intersection Design Using Intersection Tools
Mar 6, 2013I am trying to create an intersection design using the Intersection Tools in C3D 2012. I followed the steps in the tutorials, created a corridor on the major road, splitted the regions, created the intersection and added it to the major road corridor, and connect the regions with the intersection portion.
I used the same assembly throughout the design just for simplicity, however, i notice that there are gaps of curb between the curb return section and the through section (as outline in red rectangles).
AutoCAD Inventor :: Dimension To Intersection
Sep 5, 2012When I place a centerline (or include a workplane from the ipt) is there ANY way to dimension to the intersection of this centerline and the edge of an object?
Like in this image above, I would like a horizontal dim between the vertical centerline and the intersection of the centerline and the edge of the part.I know that I can create a sketch on the view and project geometry/draw geometry... but that is such a pita.
AutoCAD Inventor :: Radius Cut On Hex Nut?
Aug 21, 2012how to do a rwdius on a hex nut as shows in attached JPEG image. I am attaching my ipt file as well without radius.
View 2 Replies View RelatedAutoCAD Inventor :: Apparent Intersection Not Working?
Jan 22, 2013Having problems dimensioning to an apparent intersection in an IDW?
Once I hover over both lines to show the intersect and both line do intersect but it should turn green, it's not, it just keeps yellow.
It is placing the dim in the right place but it's also not drawing in the intersect lines.
It was working last month as I have a drawing to prove it.This is on a few machines.
Also moving dimension is a problem. Sometimes they will not reattach after moving one end.
AIP2011 sp2
AutoCAD Inventor :: Ordinate Dimension To Intersection?
Feb 6, 2006I can put a regular dimension to an intersection, but when I rmb I do not have the intersection option when placing an ordinate dimension. Is there another way to go about putting an ordinate dimension to an intersection?
View 9 Replies View RelatedAutoCAD Inventor :: Dimension At An Intersection Point?
Oct 13, 2011How do we create dimension at an intersection point between arc and line?see attached picture. I need to create dimension as red line.
View 3 Replies View RelatedAutoCAD Inventor :: Intersection Curve Sweep End Profiles?
Jan 7, 2012I am practicing modelling 3D sweeps using an intersection curve, and tried to insert a swept cut on the attached model, but the ends are not circular. I assume this is because the plane which I drew the sweep profile on is not on the top face. Is there an easy way to rectify this and create the semicircular channel in the ends?
View 3 Replies View RelatedAutoCAD Inventor :: How To Dimension For Corner Intersection In Drawing
Oct 24, 2013dimension bend parts with corner intersection. Is there any option in Autodesk Invenor Drawing so that i can give dimensions as shown in attached image.
View 2 Replies View RelatedAutoCAD Inventor :: Intersection Of Sphere Surface And Plane
Sep 15, 2013I need an intersection of the surface of a sphere and a plane, producing a circular line.
I do not know how to do that.
AutoCAD Inventor :: How To Snap Origin To Centerline Intersection
Aug 26, 2012I have problem with placing origin of ordinate dimensions on point where two centerlines are intersecting.
In my particular case I have rectangle and centerlines are in the middle of pararel edges. So they are crossing eatch other in the center of rectangle.
I need to place origin for ordinate dimensions in this point. But till now I had not find any way to do that except make a skkech and draw a line that's one end is exactly in the point I want. But it seems to me like rather ridicules aolution.
AutoCAD Inventor :: How To Change Radius On A Bend
Oct 21, 2011I have been trying to bend a larger radius on a corner bend but i can not seem to be able to . I start out with a face of 46" x 82" i want to put a 1/2" bend up then a 1/2" bend out to make a z shape i'm using as a material .109 stainless steel and i want to end up with a 1/2" on the inside corners so that when i'm done i can flatten it out to get the proper sheer size for the piece the metal brake i'm using has a 1/2" die in thats why i trying to figure this out is their any way to put this kind of radius on the sheet metal bends.
View 2 Replies View RelatedAutoCAD Inventor :: Get Rid Of Right Click Radius Menu?
Nov 28, 2012I just had to reinstall Inventor and I forget how to remove the annoying radial menu that pops up whenever I right click. I just want the normal right click menu.
Inventor 2013
Windows XP
AutoCAD Inventor :: Add A Radius In A Corner And Its Not Cooperating
Apr 12, 2012Trying to add a radius in a corner and its not cooperating. Take a look at this image. Notice how the one radius curves around the part, but the other one does not? I know these two look different because they are different sizes. I would like to get the 1in radius to go straight across like the R3/4, but it will not do it. I've tried the options under the chevron, but nothing gives me what I want.
View 9 Replies View RelatedAutoCAD Inventor :: Dimension Circles With Same Radius With API
Sep 26, 2011I have been able to dimension any circle on the drawing， but if there're several circles with the same radius ,I just don't know how to dimension the circles with the same radius with only one dimension.
View 1 Replies View RelatedAutoCAD Inventor :: Follow Radius Of Roll
Jul 12, 2012I'm still new using autodesk inventor and still learning. I have trouble to cut the plate (Penahan Depan.ipt) follow the radius of the roll (Roll.ipt).
View 4 Replies View RelatedAutoCAD Inventor :: How To Split Edge For Radius
Feb 8, 2012I would like to radius the edge of a block for about 1" along a 3" edge. In Solid-doesn't-Works I would select an eddge to radius and then would edit it pulling one end of the line to radius back to the desired length of the radius.Here I find no option to edit the edge, I have also tried splitting the edge but I can't seem to make that feature work. Is there a way to do this short of creating a work plane at one end of the edge and then creating a cut to a set depth?
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
AutoCAD Inventor :: Project Intersection Of Axis With Plane Command
Nov 3, 2011I am trying to constrain a point on a sketch to the intersection of an axis with my sketch plane... and I'm having some trouble. I can't select the axis when I select the "Project Cut Edges" and the "Project Geometry" is of no use because the axis is not normal to my sketch plane.
I'm trying to cut holes normal to my sketch plane on a curved surface using points projected from an overhead sketch.
AutoCAD Inventor :: Any Way To Preload Info - Bend Radius
Feb 27, 2012Is there a way to preload information into Inventor in regards to the break press such as the dies being used or the ones available so the when the computer is deciding a bending radius,it know what tool we have?
Currently the bend radius is set to "radius", which i am assuming is default, but I can't figure out how to change that either, and depending on the thickness it will change, but like today it said I would need a 1/16th inch radius, but we don't have a 1/16th inch die,it is an 85 degree air bending setup,and has a 4 way die with smaller and bigger openings.
AutoCAD Inventor :: Dimension Style Radius Vs Diameter
Jan 4, 2013I am trying to edit my drawing template dimension style to always do a diameter (if it is a circle). Right now it defaults to radius and I manually right click and change it. I found all sorts of styles for how it displays the radius and diameter, but didn't find where to set the default.
View 7 Replies View RelatedAutoCAD Inventor :: How To Change Sheet Metal Radius
Jun 4, 2013how to change the bend radius on a flange that has several different bend radii with the same metal thickness. For example, I have a sheet metal part that is 1/4" thick and has one bend radius that needs to be .030". How can I change the bend radius?
View 2 Replies View RelatedAutoCAD Inventor :: Changing Radius Dimension To Diameter?
Jul 9, 2012How do I change this dimension into a diameter dimension?
I have tried editing the dimension style to display as a diameter and it doesn't change it. I tried creating a new dimension style and it doesn't change it.
AutoCAD Inventor :: Modifying Diameter And Radius Dimensions
Oct 23, 2012My company is trying to Standardize all drawings produced to 1 format. the one we are attempting to create would be in the form of: nominal upper limit^lower limit. this is easily acheived in autocad and linear, chamfer, and hole/thread dimensions in inventor. but radii's and diameters from a round surface (as apposed to linear diameters) we have run into a snag with. We cannot seem to find a way to either remove the prefix symbols or be able to insert text between the symbol and tolerance.
below is a illistration of the problem and the form of the new dimensions.
AutoCAD Inventor :: Bending Sheet Metal Having Big Radius
Dec 3, 2013We have an issue where we are trying to bend a 1mm sheet with a 24mm radius. The one side must come out 105mm wide and the flange must be 50 mm wide. inventor gives a flat pattern width of 143.4
If we bend using a brake press and a 24mm tube blade then it wont come out the right size. its like the flat pattern isn't big enough. we get the 50 mm flange but whats left over is 99 and not 105. How do we deal with something like this?
AutoCAD Inventor :: Variable Radius Going Wrong Direction
Sep 6, 2012Trying to apply a variable radius to a part. The direction of the radius is wrong (pointed back in toward the part) and I cant get it to go the other way. As long as all the fillets along the curve are the same radius, the fillet will compute, but if I make them vary, then it fails.
View 2 Replies View RelatedAutoCAD Inventor :: Find Intersection Point Between Line Segment And Workplane
Aug 31, 2011I have to create a hole (extrude) in a wall part in my assembly document where a stack will be installed.
To determine where, I verify if a line segment pass through the wall (XY Plane).
But I get an error with the command: IntersectWithLine
Here's my
Public Function IntersectionPoint(ByVal app As Inventor.Application,
ByVal wp As Inventor.WorkPlane) As Inventor.Point
Dim oTransGeom As Inventor.TransientGeometry = app.TransientGeometry
Dim startPoint As Inventor.Point = oTransGeom.CreatePoint(Me.StartVertex.X,
[Code] ......
AutoCAD Inventor :: How To Click On Two Lines In A Part Sketch And Get There Intersection Point Using VBA
Oct 29, 2013In assembly mode, how can I click on two lines in a part sketch and get there intersection point using VBA?
View 3 Replies View RelatedAutoCAD Inventor :: Find Intersection Point Between LineSegment2D / DrawingCurveSegment Object
Sep 14, 2012I'm attempting to find the intersection point between a LineSegment2d Object and a DrawingCurveSegment object unsuccessfully.
View 1 Replies View RelatedAutoCAD Inventor :: Intersection Point Between Cylindrical Curve And Faces In Body
Feb 7, 2013I want to find the intersection point between a cylindrical curve and faces in a body. I have the start point an start vector and a rotational velocity. With this values it should be possible to create this cylindrical curve.
Is there a function in inventor which I can use?
Currently I am using the function "FindUsingRay". But I thing that there is only the possibility to fire a linear function through the body.
Today I found the command "FindUsingVector":
Sub FindUsingVector(OriginPoint As Point, Direction As UnitVector, ObjectTypes As SelectionFilterEnum(), ByRef UseCylinder As [defaultvalue(-1)] Boolean, ByRef ProximityTolerance As [optional] VARIANT, ByRef VisibleObjectsOnly As [defaultvalue(-1)] Boolean, ByRef LocationPoints As [optional] VARIANT,
I did not find any information in the "Autodesk Programming help". what is the difference between this both functions?
Is the argument "UseCylinder" for a switch into cylindrical coordinate system?
AutoCAD Inventor :: Sheet Metal - Create Flanges On A Radius
Feb 18, 2013The question is if I have designed a part in sheet metal with multiple flanges and one of my edges follow a specific radius. Is is possible to use contour roll or any other means to create a flange on that edge that will allow me to flatten that out. I cant see it being physically possible putting a bend in there as the material would need to stretch and the bend tool would need to follow that radius.
View 2 Replies View Related
