AutoCAD Inventor :: Dimension At An Intersection Point?
Oct 13, 2011How do we create dimension at an intersection point between arc and line?see attached picture. I need to create dimension as red line.
View 3 Replies
ADVERTISEMENT
AutoCAD Inventor :: Dimension To Intersection
Sep 5, 2012When I place a centerline (or include a workplane from the ipt) is there ANY way to dimension to the intersection of this centerline and the edge of an object?
Like in this image above, I would like a horizontal dim between the vertical centerline and the intersection of the centerline and the edge of the part.I know that I can create a sketch on the view and project geometry/draw geometry... but that is such a pita.
AutoCAD Inventor :: Ordinate Dimension To Intersection?
Feb 6, 2006I can put a regular dimension to an intersection, but when I rmb I do not have the intersection option when placing an ordinate dimension. Is there another way to go about putting an ordinate dimension to an intersection?
View 9 Replies View RelatedAutoCAD Inventor :: How To Dimension For Corner Intersection In Drawing
Oct 24, 2013dimension bend parts with corner intersection. Is there any option in Autodesk Invenor Drawing so that i can give dimensions as shown in attached image.
View 2 Replies View RelatedAutoCAD Inventor :: Find Intersection Point Between Line Segment And Workplane
Aug 31, 2011I have to create a hole (extrude) in a wall part in my assembly document where a stack will be installed.
To determine where, I verify if a line segment pass through the wall (XY Plane).
But I get an error with the command: IntersectWithLine
Here's my
Public Function IntersectionPoint(ByVal app As Inventor.Application,
ByVal wp As Inventor.WorkPlane) As Inventor.Point
Dim oTransGeom As Inventor.TransientGeometry = app.TransientGeometry
Dim startPoint As Inventor.Point = oTransGeom.CreatePoint(Me.StartVertex.X,
[Code] ......
AutoCAD Inventor :: How To Click On Two Lines In A Part Sketch And Get There Intersection Point Using VBA
Oct 29, 2013In assembly mode, how can I click on two lines in a part sketch and get there intersection point using VBA?
View 3 Replies View RelatedAutoCAD Inventor :: Find Intersection Point Between LineSegment2D / DrawingCurveSegment Object
Sep 14, 2012I'm attempting to find the intersection point between a LineSegment2d Object and a DrawingCurveSegment object unsuccessfully.
View 1 Replies View RelatedAutoCAD Inventor :: Intersection Point Between Cylindrical Curve And Faces In Body
Feb 7, 2013I want to find the intersection point between a cylindrical curve and faces in a body. I have the start point an start vector and a rotational velocity. With this values it should be possible to create this cylindrical curve.
Is there a function in inventor which I can use?
Currently I am using the function "FindUsingRay". But I thing that there is only the possibility to fire a linear function through the body.
Today I found the command "FindUsingVector":
Sub FindUsingVector(OriginPoint As Point, Direction As UnitVector, ObjectTypes As SelectionFilterEnum(), ByRef UseCylinder As [defaultvalue(-1)] Boolean, ByRef ProximityTolerance As [optional] VARIANT, ByRef VisibleObjectsOnly As [defaultvalue(-1)] Boolean, ByRef LocationPoints As [optional] VARIANT,
I did not find any information in the "Autodesk Programming help". what is the difference between this both functions?
Is the argument "UseCylinder" for a switch into cylindrical coordinate system?
AutoCAD Inventor :: Ordinate Dimension To Apparent Intersection? (but Not Using Ordinate Set)
Jun 11, 2013There was a message on here about using Ordinate Set to create an ordinate dimension to an apparent intersection and I've managed to do that, but is there a way to use just Ordinate to dimension to an apparent intersection? I've tried dragging and right click menu but no luck.
I'm using Inventor Professional 2012.
AutoCAD Inventor :: Dimension A Point Using Arrow (x / Y)
Apr 10, 2013This is not exactly a CAD issue but I use Inventor at times to create illustrations for math stuff. Is there a way to place a dimension like an arrow with x and y as text.
ASCCi art of what I want:
<---(1.2, 3.4)
Inventor Professional 2012 SP1 (25 seats with subscription)
Windows 7 64 bit
Lenovo D20, 12 GB RAM, Intel Xeon X5687 3.6 GHz, SSD
Quadro 4000, driver 8.17.12.9573, dual monitors
SpacePilot, driver version 6.15.3 Firmware 3.12
AutoCAD Inventor :: Dimension A New Feature To The Mid Point Of The Surface?
Aug 15, 2012While in sketch mode, while in a part, how do I dimension a new feature to the mid point of the surface?
In the example I've attached, I am wanting to dimension the holes around the midpoint of the surface, without stopping what I'm doing, drawing a construction line, then dimensioning to the construction line?
AutoCAD Inventor :: Change Dimension In Drawing To New Point / No Snaps?
Oct 9, 2013I seem to recall being able to do this in 2013...
Say you've dimensioned something but end up wanting to change the dimension definition points...drag the end point to another location that you want dimensioned.
I thought it used to snap to a new location, but now it will not. I have to redraw the dimension (including all text I added).
Here is what I get when I try to move the dimension definition point:
Here is what I get when I try the auto-reattach feature in "repair". Still nothing to snap to.
AutoCAD .NET :: Why Only 1 Intersection Point Instead Of 2
Aug 24, 2013When I check with DIST command both the ends of the line are with distance 0.00000000 to the region. But when I apply intersectwith method to them I get only 1 intersection. This is a sample only, I face this issue regularly.
Private Sub Button31_Click(sender As Object, e As EventArgs) Handles Button31.Click Dim R1 As AcadEntity = Nothing, R2 As AcadEntity = Nothing Ut.GetEntity(R1, "seç") Ut.GetEntity(R2, "seç") Dim inters As Object = R1.IntersectWith(R2, AcExtendOption.acExtendNone) End Subor Dim entMain As Autodesk.AutoCAD.DatabaseServices.Entity = tr.GetObject(id, Autodesk.AutoCAD.DatabaseServices.OpenMode.ForRead) 'Setup 3d plane and point collection Dim myPlaneWCS As Plane = New Plane(New Point3d(0, 0, 0), New Vector3d(0, 0, 1)) Dim myIntPntCol As Point3dCollection = New Point3dCollection() Dim myintptr01 As IntPtr = New IntPtr() Dim myintptr02 As IntPtr = New IntPtr() 'Get intersecting point collection entMain.IntersectWith(ent, Intersect.OnBothOperands, myPlaneWCS, myIntPntCol, myintptr01, myintptr02)
Windows 7 (x64)
AutoCAD 2012 (x64)
AutoCAD 2010 :: Point Of Intersection
May 9, 2013Isn't there a command that allows you to pick 2 lines and snap to the point of intersection when dimensioning an object with a fillet/chamfer? Typically I o-track it with apparent intersection with no issues, but its a little more difficult when your working with sloped lines, tracking doesnt like to follow angled lines. (Maybe its inventor that I'm think of that can do this?)
View 3 Replies View RelatedAutoCAD .NET :: Why Intersection Point Does Not Lie On The Curve
Aug 4, 2013I find intersection of two curves with interop
Dim Zinters As Object = DuvarObj.IntersectWith(MainObj, AcExtendOption.acExtendNone)
then pass the intersection points pt1 and pt2 to managed code to get length of the curve between two intersection points , but I realized that sometimes decimal numbers maybe 10th after comma is different than the curve's start or end points. And so the code below throws error, since point pt1 or pt2 is not exactly on the curve, but they are the intersection points excatly.
What can I do?
Dim dist1 As Double = ent.GetDistanceAtParameter(ent.GetParameterAtPoint(pt1))Dim dist2 As Double = ent.GetDistanceAtParameter(ent.GetParameterAtPoint(pt2))
Windows 7 (x64)
AutoCAD 2012 (x64)
AutoCAD 2010 :: Can't Snap To Intersection Point
Jul 10, 2012Form Autocad 2000 to 2012, there is always with this problem. It happens sometimes in object snap, it does not work to snap a intersection point (two crossed lines) when drawing a line or arc or others. For sure, these two lines are in the same plan and can be filleted or chamfered. So I turned on the Apparent intersection, it works with apparent intersection point, I am not sure if this apparent intersection will cause other problem. I am working on pure 2-D drawing, do not want to get any 3D objects inside the drawing.
View 3 Replies View RelatedAutoCAD Civil 3D :: Point Of Intersection Alignment Report?
Jul 6, 2012I want to generate Civil 3D point of intersection alignment report including following columes.
PI Row station
Delta Angle
PI Includead Angle
Is this possible?
AutoCAD Civil 3D 2012 SP 2
AutoCad :: Zoom Intersection Point Of Lines And Circle
Apr 7, 2013I Posted This problem twice but it doesn't showed in the forum. I don't know why, whatever, My problem is making Array with a circle and a line[same as to radius]. When i use array between them to create 9 more lines, some lines are becomes bigger then the original line. why this happen? I attach a file to be understand clearly. Zoom the intersection point of lines and the circle.
View 3 Replies View RelatedAutoCAD .NET :: Selecting Lines Around Intersection Point With Reference Line?
Sep 17, 2011Is it possible to select lines (maybe up to 6 lines) around an intersection point with a reference line. There is one intersection point and the lines are around it. And also, both the intersecting lines are in different layers.
How to get the ObjectARX's ArxDbg tool working on autocad 2012. ObjectARX 2010 sample project fails to open in VS2010 express.
AutoCAD Civil 3D :: Projecting Objects To Profile View And Showing Point Of Intersection
Nov 11, 2013Say I'm projecting some 3D polylines to a profile view I have, and the 3D polylines cross the alignment defining the profile view. Is there a way to format the projections such that the point of intersection is identified, and that the points will be updated if I change either the alignment or the 3D polylines?
View 1 Replies View RelatedIllustrator SDK :: Intersection Of Anchor Point With A Middle Of The Path
Jan 20, 2013Is it possible to find intersection poit of the anchor point and any point on path?
Like on a picture, there are an anchor poit from a line, which intersects arc path, and I need to find intersection poit on the arc (can be line) path. Thus I can do further processing for arc after intersection - change position, set color etc.
I suppose I need to divide that arc path and that will be the best way, but all I need for this moment extract point before intersection and after and process in our custom preview. Is there way to find this intersection?
Illustrator :: Creating Anchor Point On Intersection Of Two Paths?
Apr 2, 2013I'm trying to crate an anchor point on an intersection of two paths. Not by 'joining paths' (as that joins them from the ends); I just want to join two paths in such a way that an anchor point is crated at the point where they intersect. That's how it works in Flash, but I can't figure it out in AI. I created an image to clarify what I'm trying to achieve.
View 9 Replies View RelatedRevit :: Hosted Adaptive Point Along Intersection Of Reference Planes
Mar 20, 2013Is it possible to host an adaptive point along the intersection of two reference planes? Or is there another way to accomplish this same idea?
View 5 Replies View RelatedAutoCAD 2013 :: Distinction Between Intersection And Apparent Intersection In Snaps
Sep 15, 2012What distinction is between “intersection” and “apparent intersection” in snaps,. I’m not sure what difference is between the “intersection” and “apparent intersection” in snaps.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD Civil 3D :: Create Intersection Design Using Intersection Tools
Mar 6, 2013I am trying to create an intersection design using the Intersection Tools in C3D 2012. I followed the steps in the tutorials, created a corridor on the major road, splitted the regions, created the intersection and added it to the major road corridor, and connect the regions with the intersection portion.
I used the same assembly throughout the design just for simplicity, however, i notice that there are gaps of curb between the curb return section and the through section (as outline in red rectangles).
AutoCAD Inventor :: How To Convert Normal Dimension To Driven Dimension Through ILogic
May 28, 2013I have one problem in ilogic "How to convert the normal dimension to driven dimension through ilogic"
View 4 Replies View RelatedAutoCAD Inventor :: Make Radius Dimension Diameter Dimension?
Feb 23, 2013how to make a radius dimension a diameter dimension? I have Inventor Profession 2013.
View 1 Replies View RelatedAutoCAD Inventor :: Override A Dimension To Create A Basic Dimension?
Jun 27, 2011Is there a way to override a dimension and have it shown as a GD&T Basic dimension. I can override a dimension with the text option but not with a box around the letter. It sounds strange to do this but the letter represents a dimension in a chart format that are Basic dimensions.
View 9 Replies View RelatedAutoCAD Inventor :: Make Linear Dimension A Diameter Dimension?
Jan 27, 2012Is there a way to make the linear dimension a diameter dimension?
View 9 Replies View RelatedAutoCAD Inventor :: Intersection With Radius
Oct 10, 2011We need to be able to use intersection with radius... In doing, it just snaps to the center not intersection.
View 9 Replies View RelatedAutoCAD 2013 :: Dimension Tags And Text / Point Are Merged With Other Drawing Objects
Oct 20, 2013i am opening file in autocad 2013, my all dimension tags and text and point are merged with my other drawing objects how can i separate.
View 1 Replies View Related