Isn't there a command that allows you to pick 2 lines and snap to the point of intersection when dimensioning an object with a fillet/chamfer? Typically I o-track it with apparent intersection with no issues, but its a little more difficult when your working with sloped lines, tracking doesnt like to follow angled lines. (Maybe its inventor that I'm think of that can do this?)
Form Autocad 2000 to 2012, there is always with this problem. It happens sometimes in object snap, it does not work to snap a intersection point (two crossed lines) when drawing a line or arc or others. For sure, these two lines are in the same plan and can be filleted or chamfered. So I turned on the Apparent intersection, it works with apparent intersection point, I am not sure if this apparent intersection will cause other problem. I am working on pure 2-D drawing, do not want to get any 3D objects inside the drawing.
When I check with DIST command both the ends of the line are with distance 0.00000000 to the region. But when I apply intersectwith method to them I get only 1 intersection. This is a sample only, I face this issue regularly.
Private Sub Button31_Click(sender As Object, e As EventArgs) Handles Button31.Click Dim R1 As AcadEntity = Nothing, R2 As AcadEntity = Nothing Ut.GetEntity(R1, "seç") Ut.GetEntity(R2, "seç") Dim inters As Object = R1.IntersectWith(R2, AcExtendOption.acExtendNone) End Subor Dim entMain As Autodesk.AutoCAD.DatabaseServices.Entity = tr.GetObject(id, Autodesk.AutoCAD.DatabaseServices.OpenMode.ForRead) 'Setup 3d plane and point collection Dim myPlaneWCS As Plane = New Plane(New Point3d(0, 0, 0), New Vector3d(0, 0, 1)) Dim myIntPntCol As Point3dCollection = New Point3dCollection() Dim myintptr01 As IntPtr = New IntPtr() Dim myintptr02 As IntPtr = New IntPtr() 'Get intersecting point collection entMain.IntersectWith(ent, Intersect.OnBothOperands, myPlaneWCS, myIntPntCol, myintptr01, myintptr02)
Dim Zinters As Object = DuvarObj.IntersectWith(MainObj, AcExtendOption.acExtendNone)
then pass the intersection points pt1 and pt2 to managed code to get length of the curve between two intersection points , but I realized that sometimes decimal numbers maybe 10th after comma is different than the curve's start or end points. And so the code below throws error, since point pt1 or pt2 is not exactly on the curve, but they are the intersection points excatly.
What can I do?
Dim dist1 As Double = ent.GetDistanceAtParameter(ent.GetParameterAtPoint(pt1))Dim dist2 As Double = ent.GetDistanceAtParameter(ent.GetParameterAtPoint(pt2))
I Posted This problem twice but it doesn't showed in the forum. I don't know why, whatever, My problem is making Array with a circle and a line[same as to radius]. When i use array between them to create 9 more lines, some lines are becomes bigger then the original line. why this happen? I attach a file to be understand clearly. Zoom the intersection point of lines and the circle.
Is it possible to select lines (maybe up to 6 lines) around an intersection point with a reference line. There is one intersection point and the lines are around it. And also, both the intersecting lines are in different layers.
How to get the ObjectARX's ArxDbg tool working on autocad 2012. ObjectARX 2010 sample project fails to open in VS2010 express.
I have to create a hole (extrude) in a wall part in my assembly document where a stack will be installed.
To determine where, I verify if a line segment pass through the wall (XY Plane).
But I get an error with the command: IntersectWithLine
Here's my
Public Function IntersectionPoint(ByVal app As Inventor.Application, ByVal wp As Inventor.WorkPlane) As Inventor.Point Dim oTransGeom As Inventor.TransientGeometry = app.TransientGeometry Dim startPoint As Inventor.Point = oTransGeom.CreatePoint(Me.StartVertex.X, [Code] ......
I want to find the intersection point between a cylindrical curve and faces in a body. I have the start point an start vector and a rotational velocity. With this values it should be possible to create this cylindrical curve.
Is there a function in inventor which I can use?
Currently I am using the function "FindUsingRay". But I thing that there is only the possibility to fire a linear function through the body.
Today I found the command "FindUsingVector":
Sub FindUsingVector(OriginPoint As Point, Direction As UnitVector, ObjectTypes As SelectionFilterEnum(), ByRef UseCylinder As [defaultvalue(-1)] Boolean, ByRef ProximityTolerance As [optional] VARIANT, ByRef VisibleObjectsOnly As [defaultvalue(-1)] Boolean, ByRef LocationPoints As [optional] VARIANT,
I did not find any information in the "Autodesk Programming help". what is the difference between this both functions?
Is the argument "UseCylinder" for a switch into cylindrical coordinate system?
Say I'm projecting some 3D polylines to a profile view I have, and the 3D polylines cross the alignment defining the profile view. Is there a way to format the projections such that the point of intersection is identified, and that the points will be updated if I change either the alignment or the 3D polylines?
Is it possible to find intersection poit of the anchor point and any point on path?
Like on a picture, there are an anchor poit from a line, which intersects arc path, and I need to find intersection poit on the arc (can be line) path. Thus I can do further processing for arc after intersection - change position, set color etc.
I suppose I need to divide that arc path and that will be the best way, but all I need for this moment extract point before intersection and after and process in our custom preview. Is there way to find this intersection?
I'm trying to crate an anchor point on an intersection of two paths. Not by 'joining paths' (as that joins them from the ends); I just want to join two paths in such a way that an anchor point is crated at the point where they intersect. That's how it works in Flash, but I can't figure it out in AI. I created an image to clarify what I'm trying to achieve.
I know we can do this easily in AutoCAD Electrical, but I could not find any command or feature in AutoCAD to set up this function so that when two lines are intersected, the cross point will become a dot or loop.
What distinction is between “intersection” and “apparent intersection” in snaps,. I’m not sure what difference is between the “intersection” and “apparent intersection” in snaps.
I am trying to create an intersection design using the Intersection Tools in C3D 2012. I followed the steps in the tutorials, created a corridor on the major road, splitted the regions, created the intersection and added it to the major road corridor, and connect the regions with the intersection portion.
I used the same assembly throughout the design just for simplicity, however, i notice that there are gaps of curb between the curb return section and the through section (as outline in red rectangles).
how to match up certain points. I have imported 2 point clouds and have tried to use the 'align' tool to specify three points from the source object (cloud) and three points from the destination object (cloud). When doing this, it does not properly align them. The point cloud makes it difficult to select the exact point I would like to align, since there may not be a point at that exact location, but close to it. Does AutoCAD require the points in alignment to match up perfectly or is it capable of doing a best fit?
Also, is AutoCAD capable of creating a solid 3D piece from the point cloud? I would like to take all of my points and make a smooth object.
How do I get rid of this "pin point" in my display. It shows up when displaying an isometric or perspective view. I would like to make a nice screenshot without it. There must be a variable somewhere?
How to have more than one point style in the same file? I’m wondering if there is a way to have more than one point style in the same file? Is that possible?
Is there a way one can draw a point array on a curve without starting from the beginning of the curve? I want to place point objects at equal intervals on a curve, but starting at a certain distance from the beginning of the curve.
I accidentally got constraints in my present drawing and could not get rid of them. pls give me a hand on how to delete them. it is causing me a problem when for example i need to stretch a line that have a point (which makes part of the line) the point moves together with the line which means the original coordinate of the point is lost. THIS MUST NOT HAPPEN. i work with precise coordinates which means the coordinates of points should be kept as originals and NOT TO MOVE ELSEWHERE.
I notice i was using the multiple stretch with C option when I noticed the problem started and after that i had constraints sticked on all the lines.
Having problem of trying to Move, Copy, Stretch etc an object and instead of being able to select a base point...Displacement (which is the default at the command prompt) is somehow selected and your object goes off to coordinate points? It's probably just a setting or its my mouse, but I didn't change anything and I'm just starting to see the problem.