I know we can do this easily in AutoCAD Electrical, but I could not find any command or feature in AutoCAD to set up this function so that when two lines are intersected, the cross point will become a dot or loop.
View 9 RepliesI have feature line with elevations that represents bottom of ditch and want to go UP 3:1 slope. also i have edge of road feature line that is higher than ditch and want to go 2% down until it hits side of the ditch that is 3:1. Any easiest way in civil 3d to create intersection line between ditch bottom going up 3:1 and edge of road going down 2%?
View 2 Replies View RelatedI need to do it quickly with many text regions. How to make line boundary around multi-line text region corresponding to text mask?
View 9 Replies View RelatedI'm trying to get the "Y" intersection of a line I construct and a given polyline using the following code.The debugger stops at this line that calls the function
intersectStartY = GetYIntersection(elevationLine.StartPoint)
The error message is "MissingMethodException was unhandled by user code"
Method not found: 'Void Autodesk.AutoCAD.DatabaseServices.Entity.IntersectWith(Autodesk.AutoCAD.DatabaseServices.Entity, Autodesk.AutoCAD.DatabaseServices.Intersect, Autodesk.AutoCAD.Geometry.Point3dCollection, Int32, Int32)'.
{code}
Public Function GetYIntersection(ByVal elevationLinePoint As Point3d) As Double
Dim intersectY As Double = Nothing
Dim intersectPoints As Point3dCollection = Nothing
[code].....
When you clip an something from a file you insert, is there a way not to have the outline that you clip show?
View 1 Replies View RelatedI have a drawing file in AutoCADMap 3D 2011 consists of some administrative boundaries and city boundaries. Now I have roads of multi line style in the same drawing. When I completed the drawing I noticed there were missing intersections and I wanted all the roads to look something like the drawing shown below.
Please look into the word file thats how I wanted to do intersection in my drawing. Is it possible to do this action in one command or tool.
This is how my drawing looks like. This is how I want the drawing to be.
In Regis you copuld use the "clean"command to break each line at an intersection. What command or function must I use in AutoCad 2013? I wish to break the lines at each intersection in order to import the lines into a GIS application. I am currently drawing in 2D.
View 4 Replies View RelatedWhen trying to place a construction line through an intersection the line offsets depending on where the cursor is placed. When the on screen prompt ask to specify through point. It defaults to 0 and I enter in 45'. It comes back invalid. believe this is a snap setting somewhere but I cant seem to find it.
View 2 Replies View RelatedI have AutoCAD 2010. When I start it up, and draw simple lines in the drawing editer and then try to save the drawing,
AutoCAD gets hug up in a loop, and stops working.
I have tryed the repair option and I have reinstalled AutoCAD serveral times, and it still has not repaired the problem.
I need AutoCAD 2010 to do work.
Is it possible to select lines (maybe up to 6 lines) around an intersection point with a reference line. There is one intersection point and the lines are around it. And also, both the intersecting lines are in different layers.
How to get the ObjectARX's ArxDbg tool working on autocad 2012. ObjectARX 2010 sample project fails to open in VS2010 express.
I was looking for a post on the subject of line and circle intersections and found one that Bill Z had posted. I decided to incorperate one of the replies into my own code. In particular Luis Esquivel's code. With some minor modifications I was able to add the onseg argument that extends intersection points for the line to the circle. I also modified it to return only one point or two points depending on the line and circle supplied and the onseg argument. It seems to work great.
; test function
(defun c:go ( / )
(ed_init)
(while
(or
(not (setq ent (entsel "
[code].....
AutoCAD 2010 SP2:
Upon setting up a drawing for plotting (the problem is not printer specific) the "Print Preview" gets stuck in a loop where I am unable to exit if I choose to cancel or alter the settings. I am forced to go ahead and send the plot. If iI immediately go back and run the PLOT command again nothing happens... no dialog box, no error nothing. I must then go to any other open dwg, do a save, and then go back to the original dwg. Then the PLOT command will again work, however, still getting stuck in the preview loop.
I recieved my serial # and product key.
But I can't apply it because the site states my account has not been activated. It places me into a loop to resend to my email to activate my account. I'm in a never ending loop. There seems to be a glitch to the site.
Isn't there a command that allows you to pick 2 lines and snap to the point of intersection when dimensioning an object with a fillet/chamfer? Typically I o-track it with apparent intersection with no issues, but its a little more difficult when your working with sloped lines, tracking doesnt like to follow angled lines. (Maybe its inventor that I'm think of that can do this?)
View 3 Replies View RelatedI use Mtext quite a bit and I am trying to convince others in the office that it's a good thing (versus single line text in long paragraphs). One of their concerns in the shape of the Mtext. For instance, when you use Mtext, you type into a nice rectangle that you can change the size of. What they have to do on occassion is instead of having a nice rectangle of text, they have to make it like a triangle. So in this case, single line text can be adjusted so that the end of the sentences make an angle.
Is there a way to do this using mtext? Or is there an lsp that will work?
How do you detect the intersection of a line and circle or arc.
View 1 Replies View RelatedI have to create a hole (extrude) in a wall part in my assembly document where a stack will be installed.
To determine where, I verify if a line segment pass through the wall (XY Plane).
But I get an error with the command: IntersectWithLine
Here's my
Public Function IntersectionPoint(ByVal app As Inventor.Application,
ByVal wp As Inventor.WorkPlane) As Inventor.Point
Dim oTransGeom As Inventor.TransientGeometry = app.TransientGeometry
Dim startPoint As Inventor.Point = oTransGeom.CreatePoint(Me.StartVertex.X,
[Code] ......
Form Autocad 2000 to 2012, there is always with this problem. It happens sometimes in object snap, it does not work to snap a intersection point (two crossed lines) when drawing a line or arc or others. For sure, these two lines are in the same plan and can be filleted or chamfered. So I turned on the Apparent intersection, it works with apparent intersection point, I am not sure if this apparent intersection will cause other problem. I am working on pure 2-D drawing, do not want to get any 3D objects inside the drawing.
View 3 Replies View RelatedWe are making road , it has intersections with simple roads wich leads to forest or a fields or to a private territory. We have 60 of those intersections (crossroads) , if we would start making them all with intersection wizzard it would take a lot of time... , maybe there is simpler way to make such an easy crossings ? ( all of those crossroads are same type same geometry, the only difference is location)
View 4 Replies View RelatedI'm not having any luck on my own. Can I use subassemblies that I create in subassembly composer to make an intersection using the "CreateIntersection" command?
View 5 Replies View RelatedWhat distinction is between “intersection” and “apparent intersection” in snaps,. I’m not sure what difference is between the “intersection” and “apparent intersection” in snaps.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I am trying to create an intersection design using the Intersection Tools in C3D 2012. I followed the steps in the tutorials, created a corridor on the major road, splitted the regions, created the intersection and added it to the major road corridor, and connect the regions with the intersection portion.
I used the same assembly throughout the design just for simplicity, however, i notice that there are gaps of curb between the curb return section and the through section (as outline in red rectangles).
I want to make one shorter animation loop within a longer one. Example would be a rotor of a plane spinning when the plane flies by, or a parameter of a material looping within lets say 15 frames (e.g. UV offset changing in cycles) while the whole walk cycle is 60 frames long. If it is a simple property that has to be changed I could simply key in a multiplied value (in the previous example I could offset the UV by 4.0 so it would loop 4 times) but this wont be a solution for more complex stuff.
View 1 Replies View RelatedI am a graphic designer and I work on w7 64.I find the latest version of Edge Animate.I saw several tutorials, amongst those showing how to make a loop on an animation. I proceed as explained in the preview on my browser (Chrome), the animation runs, but no loops.In fact, I tried other interactions and other triggers : nothing of these works there!
View 5 Replies View RelatedSo I have 2 alpha channels. When I try to make a new selection intersecting those 2 alpha channels, there is always about 1 px that is not selected...
In the image the black pixels are the new selection, and red pixels are one of the alpha channels. No matter what I do, I can't make the new selection completely "fill the red pixels".
how to make a lasso loop(lips) within a larger lasso loop(face) and mask for skintone corr.
View 2 Replies View RelatedI am desperately looking for the function in Coreldraw that allows me to cut one object based on the intersection of another object. Essentially I am looking for the "Trim" function that exists in Autocad.
Example... draw a circle...then draw a line that crosses the center of the circle. I want to be able to remove the bottom half of the circle below the intersection line.
draw and long narrow ellipse...then draw a circle on top of the ellipse I want to remove the ends of the ellipse outside circle..In autocad this takes exactly 3 keystrokes and less than 2 seconds...I have tried everything in Coreldraw and cannot find away to make this happen...
I have been practicing using a older book(copyright 1990) and it has some decent exercises in it. I was able to do this one but it seems I can"t find the proper way to do this..First drawing a line a certain distance..ortho on,click the first point anywhere,move curser to the left and click again. that gives me a line at 180 degrees at what ever length..Line command again starting at the second point of the first line..after clicking that point,I type in @2.38<150 that gives me a line2.38 long at 150 degrees..now how do i make a third line relative to the second line so that the angle is 75 degrees and a certain length..the picture shows what I am trying to draw..using the polar cordinates you get an angle based off the UCS( which is set at world) when you try to draw the third line ..that makes the angle between line 2 an 3 not the angle that I want..To make the drawing,I rotated the ucs -30 degrees..But there has to be a better way than that..
View 9 Replies View RelatedI draw a curved line and would like it to remain as a curved line even after saving the file. However everytime after saving, and opening the file again, the curve breaks into many line segments, which is not what I want! I want the curved line that I draw to remain as a curved line even after saving and opening. How do I do that? I am using autocad2010.
I use the ARC command to draw a couple of lines, they look okay here. But after I saved it, and re-open it again, what previously appeared as curved lines changed in their appearance to polyline segments.
The AutoCAD doesn’t show the “intersect osnap” at certain zoom!
The “intersection osnap” between a “hatched rectangle” and a “DASHDOT2” line appears and disappears depending on the amount of zoom!
As I zoom out the “intersection osnap” appears but when I zoom in, it disappears
Why the "intersection Osnap" should disappear as I zoom in?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
We are creating a new company title block for the use in Inventor 2010 and AutoCAd 2010. It has initially been generated in Inventor and exported to AutoCAD. My problem is that all attributes that came over are now setup as multiline attributes and I can't seem to change them to single line. Therefore you have to open the multiline editor separately for every single item to make changes in lieu of just 'tabbing' through the values in the Enhanced Attribute Editor. This adds time and frustration and seems to be intolerable for some of my colleagues.
Is there a way to change the attributes to a single line in AutoCAD I'm just not aware of? I tried to find different settings for the export from Inventor but the options seem to be very limited.
I could probably go over this and create separate AutoCad only titleblock and border but that would kind of defeat the purpose.