AutoCAD Inventor :: Apparent Intersection Not Working?
Jan 22, 2013
Having problems dimensioning to an apparent intersection in an IDW?
Once I hover over both lines to show the intersect and both line do intersect but it should turn green, it's not, it just keeps yellow.
It is placing the dim in the right place but it's also not drawing in the intersect lines.
It was working last month as I have a drawing to prove it.This is on a few machines.
Also moving dimension is a problem. Sometimes they will not reattach after moving one end.
AIP2011 sp2
View 2 Replies
ADVERTISEMENT
Sep 15, 2012
What distinction is between “intersection” and “apparent intersection” in snaps,. I’m not sure what difference is between the “intersection” and “apparent intersection” in snaps.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 9 Replies
View Related
Jun 11, 2013
There was a message on here about using Ordinate Set to create an ordinate dimension to an apparent intersection and I've managed to do that, but is there a way to use just Ordinate to dimension to an apparent intersection? I've tried dragging and right click menu but no luck.
I'm using Inventor Professional 2012.
View 3 Replies
View Related
Jul 3, 2012
I'm using ACA 2008 and used to be able to pick two lines that didn't physically cross each other and use the trim command to trim them based on where they would cross if they extended to each other. But it doesn't seem to do it anymore.
Best way I can describe it is it used to trim at the apparent interest ion of where they would come together. I'm sure there's some easy fix to this, just don't know where it's at.
View 2 Replies
View Related
Oct 18, 2010
Using ACA 2011 and Win7 here... and I've noticed that the apparent intersection osnap does not want to work at all while working in a layout if the geometry I'm trying to snap to is also drawn in the layout.
If the geometry is in model space that osnap will work fine both in model space (through the viewport) and from outside the viewport.
View 3 Replies
View Related
Mar 6, 2013
I am trying to create an intersection design using the Intersection Tools in C3D 2012. I followed the steps in the tutorials, created a corridor on the major road, splitted the regions, created the intersection and added it to the major road corridor, and connect the regions with the intersection portion.
I used the same assembly throughout the design just for simplicity, however, i notice that there are gaps of curb between the curb return section and the through section (as outline in red rectangles).
View 6 Replies
View Related
Oct 10, 2011
We need to be able to use intersection with radius... In doing, it just snaps to the center not intersection.
View 9 Replies
View Related
Sep 5, 2012
When I place a centerline (or include a workplane from the ipt) is there ANY way to dimension to the intersection of this centerline and the edge of an object?
Like in this image above, I would like a horizontal dim between the vertical centerline and the intersection of the centerline and the edge of the part.I know that I can create a sketch on the view and project geometry/draw geometry... but that is such a pita.
View 4 Replies
View Related
Feb 6, 2006
I can put a regular dimension to an intersection, but when I rmb I do not have the intersection option when placing an ordinate dimension. Is there another way to go about putting an ordinate dimension to an intersection?
View 9 Replies
View Related
Oct 13, 2011
How do we create dimension at an intersection point between arc and line?see attached picture. I need to create dimension as red line.
View 3 Replies
View Related
Jan 7, 2012
I am practicing modelling 3D sweeps using an intersection curve, and tried to insert a swept cut on the attached model, but the ends are not circular. I assume this is because the plane which I drew the sweep profile on is not on the top face. Is there an easy way to rectify this and create the semicircular channel in the ends?
View 3 Replies
View Related
Oct 24, 2013
dimension bend parts with corner intersection. Is there any option in Autodesk Invenor Drawing so that i can give dimensions as shown in attached image.
View 2 Replies
View Related
Sep 15, 2013
I need an intersection of the surface of a sphere and a plane, producing a circular line.
I do not know how to do that.
View 2 Replies
View Related
Aug 26, 2012
I have problem with placing origin of ordinate dimensions on point where two centerlines are intersecting.
In my particular case I have rectangle and centerlines are in the middle of pararel edges. So they are crossing eatch other in the center of rectangle.
I need to place origin for ordinate dimensions in this point. But till now I had not find any way to do that except make a skkech and draw a line that's one end is exactly in the point I want. But it seems to me like rather ridicules aolution.
View 3 Replies
View Related
Nov 3, 2011
I am trying to constrain a point on a sketch to the intersection of an axis with my sketch plane... and I'm having some trouble. I can't select the axis when I select the "Project Cut Edges" and the "Project Geometry" is of no use because the axis is not normal to my sketch plane.
I'm trying to cut holes normal to my sketch plane on a curved surface using points projected from an overhead sketch.
View 3 Replies
View Related
Aug 31, 2011
I have to create a hole (extrude) in a wall part in my assembly document where a stack will be installed.
To determine where, I verify if a line segment pass through the wall (XY Plane).
But I get an error with the command: IntersectWithLine
Here's my
Public Function IntersectionPoint(ByVal app As Inventor.Application,
ByVal wp As Inventor.WorkPlane) As Inventor.Point
Dim oTransGeom As Inventor.TransientGeometry = app.TransientGeometry
Dim startPoint As Inventor.Point = oTransGeom.CreatePoint(Me.StartVertex.X,
[Code] ......
View 2 Replies
View Related
Oct 29, 2013
In assembly mode, how can I click on two lines in a part sketch and get there intersection point using VBA?
View 3 Replies
View Related
Sep 14, 2012
I'm attempting to find the intersection point between a LineSegment2d Object and a DrawingCurveSegment object unsuccessfully.
View 1 Replies
View Related
Feb 7, 2013
I want to find the intersection point between a cylindrical curve and faces in a body. I have the start point an start vector and a rotational velocity. With this values it should be possible to create this cylindrical curve.
Is there a function in inventor which I can use?
Currently I am using the function "FindUsingRay". But I thing that there is only the possibility to fire a linear function through the body.
Today I found the command "FindUsingVector":
Sub FindUsingVector(OriginPoint As Point, Direction As UnitVector, ObjectTypes As SelectionFilterEnum(), ByRef UseCylinder As [defaultvalue(-1)] Boolean, ByRef ProximityTolerance As [optional] VARIANT, ByRef VisibleObjectsOnly As [defaultvalue(-1)] Boolean, ByRef LocationPoints As [optional] VARIANT,
I did not find any information in the "Autodesk Programming help". what is the difference between this both functions?
Is the argument "UseCylinder" for a switch into cylindrical coordinate system?
View 7 Replies
View Related
Mar 22, 2013
Is there a command out there that allows you to mirror objects from an apparent midpoint from like an otrack without physically drawing a line then having to erase it later? I thought there was a way to do it, but my memory is failing me.
View 1 Replies
View Related
Dec 4, 2012
I have a 3D polyline (blue in attached) for which I am trying to calculate the surface area. I use the area-->object command and get 1912342m2 in AutoCAD 2012. My colleague uses the same command in AutoCAD LT 2009 and gets 1807093m2. Due to the discrepancy, I roughly traced a polyline (yellow in attached) around the area in AutoCAD 2012 and I get approx. 1810000m2 so assumedly the AutoCAD LT 2009 version is giving the correct answer while my AutoCAD 2012 is not!
Why am I getting a different area for the polylines...is the difference is due to it being a 3D polyline? Is there a way I can ensure I obtain the correct area using the 3D polyline?
View 1 Replies
View Related
Nov 9, 2011
I'm having a frequent but random problem with Multileaders where the landing distance will change on its own from its initial standard 1/8 inch to some relatively large negative distance which also causes the landing to disappear altogether. If I use the move trick for resetting all elevations to zero (Move 0,0,10e99 then 0,0,10e-99) the landing will reappear connecting the landing grip at the strange negative offset.
The problem seems only to happen when the leader is connected to the bottom right of the note.
When I remove the leader and add a new leader it appears correct but as soon as I save the drawing the affected Multileaders will again present this problem.
Windows 7 Professional 64-bit - Service Pack 1
Intel﴾R﴿ Core﴾TM﴿ i7-3820 CPU 3.60GHz; 16 GB DDR3 Dual Channel RAM
nVidia Quadro 4000; AutoCAD Civil 3D 2013, sp1
View 9 Replies
View Related
Feb 2, 2000
How can use the Osnap "APParent Intersect" into a Lisp.Others osnap options use only one point as CENter option below:
(setq pt2 (osnap pt1 "cen"))
But to use APParent Intersect ou Perpendicular is necessary two points.I've tried use:
(setq pt2 (osnap pt1 "app"))
(setq pt2 (osnap pt1 pt2 "app"))
(setq pt2 (osnap pt1 "app" pt2))
(setq pt2 (osnap "app" pt1 pt2))
View 9 Replies
View Related
Oct 21, 2013
I have an AutoLISP program that hangs up for no apparent reason. I can run the program with an Alert in the loop. The program is a sheet generator, creating a border (insert with attributes), dimensions and MultiLeaders in Model Space, then a new Layout Tab is generated and the new elements are CHSPACEd into the new layout. An Alert temporarily halts the program once the task of a new Layout is created. In this form, the program works as designed. However, if I comment out the Alert, the program hangs up as if in an infinite loop. Also, hitting Escape does not cancel the AutoLISP, I must use Task Manager to end AutoCAD instead. My computer was recently upgraded to Win7 64-bit. I'm running 64-bit versions of software. (AutoCAD MAP 2011).
View 4 Replies
View Related
Nov 13, 2008
I have a 8800 GTX and I've got my hands on PS CS4 but apparently, all that stuff of smooth and continuous zoom in and out, capability of tossing the image is not present on my machine. This may be a stupid question but, do I need to do something on the graphics card so that it will support the GPU improvement?
View 2 Replies
View Related
Oct 20, 2012
I upgraded from CS5 to CS6 when it was released. A couple of weeks ago I uninstalled both CS5 and an old version of Photoshop Elements v7 that had been on my machine.
Even though I use CS6 I just noticed that when I look for or open a PSD file from CS6 that my PSD files are defined in the "Type" column as follows "PhotoshopElements.PSDFile.7"
I no longer have Elements 7 on my machine and I'm concerned that there might be an artifact from that old app that is being used by CS6 instead of current versions of PSD.
How to confirm I am using only current CS6 PSD converions?
Environment: Windows 7, CS6, Lightroom 4.
View 3 Replies
View Related
Jul 27, 2013
I’m currently having a serious problem with my Photoshop CS4 where it continuously crashes, for no apparent reason, since July 16, 2013. I have done everything recommended via Adobe forum to try and fix this problem though it still persists. It crashes randomly and I am usually unable to use Photoshop for more than 20 minutes. Below is the error message that appeared when Photoshop crashed,
Error Message for CS4
Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 11.0.2.0
Application Timestamp: 4bf2d91c
Fault Module Name: Photoshop.exe
Fault Module Version: 11.0.2.0
Fault Module Timestamp: 4bf2d91c
[code]...
View 4 Replies
View Related
Jan 13, 2009
I already set the frame delay to 0secs but when I "save as web design..." but when I save it as a .gif after this step, viewing in FIREFOX browser, the animated gif is not the original speed. It has some delay.
View 2 Replies
View Related
May 20, 2013
They were working correctly yesterday, and now the presence of any extension, including 'Adobe Exchange,' will cause the entire application to hang once they are selected from their panel. This seems to be the case for any/all extensions (at least the ones I use). Once I remove them all, the stock tools on the right-hand panel work correctly. However, adding back any of them means that using the panel will crash the application - whether it is selecting an extension or using a built-in feature like "Adjustments" or "3D".
Curiously, when an extension is added to the panel (assuming I don't click on it and crash PS) and I close the application like normal, Photoshop also hangs on exit, forcing me to 'force quit' it. I am not sure how that is related, but there seems to be some kind of correlation.
I'm on an early-2011 macbook pro, 8gb of ram, Radeon 6750M with 1gb of video ram, loads of disk space.
View 2 Replies
View Related
Apr 4, 2013
I dont know if this is just me but whenever i try to create and work with a 3D object in Photoshop, this black square seems to pop up for no apparent reason and its really bugging me [mainly because it sometimes blocks my view of the perspective].
View 1 Replies
View Related
Oct 20, 2012
I upgraded from CS5 to CS6 when it was released. A couple of weeks ago I uninstalled both CS5 and an old version of Photoshop Elements v7 that had been on my machine.
Even though I use CS6 I just noticed that when I look for or open a PSD file from CS6 that my PSD files are defined in the "Type" column as follows "PhotoshopElements.PSDFile.7"
I no longer have Elements 7 on my machine and I'm concerned that there might be an artifact from that old app that is being used by CS6 instead of current versions of PSD.
How to confirm I am using only current CS6 PSD conversions?
Environment: Windows 7, CS6, Lightroom 4.
View 2 Replies
View Related
