Photoshop :: Extensions Suddenly Crashing CS6 For No Apparent Reason?
May 20, 2013
They were working correctly yesterday, and now the presence of any extension, including 'Adobe Exchange,' will cause the entire application to hang once they are selected from their panel. This seems to be the case for any/all extensions (at least the ones I use). Once I remove them all, the stock tools on the right-hand panel work correctly. However, adding back any of them means that using the panel will crash the application - whether it is selecting an extension or using a built-in feature like "Adjustments" or "3D".
Curiously, when an extension is added to the panel (assuming I don't click on it and crash PS) and I close the application like normal, Photoshop also hangs on exit, forcing me to 'force quit' it. I am not sure how that is related, but there seems to be some kind of correlation.
I'm on an early-2011 macbook pro, 8gb of ram, Radeon 6750M with 1gb of video ram, loads of disk space.
View 2 Replies
ADVERTISEMENT
Jul 27, 2013
I’m currently having a serious problem with my Photoshop CS4 where it continuously crashes, for no apparent reason, since July 16, 2013. I have done everything recommended via Adobe forum to try and fix this problem though it still persists. It crashes randomly and I am usually unable to use Photoshop for more than 20 minutes. Below is the error message that appeared when Photoshop crashed,
Error Message for CS4
Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 11.0.2.0
Application Timestamp: 4bf2d91c
Fault Module Name: Photoshop.exe
Fault Module Version: 11.0.2.0
Fault Module Timestamp: 4bf2d91c
[code]...
View 4 Replies
View Related
Apr 4, 2013
I dont know if this is just me but whenever i try to create and work with a 3D object in Photoshop, this black square seems to pop up for no apparent reason and its really bugging me [mainly because it sometimes blocks my view of the perspective].
View 1 Replies
View Related
Oct 21, 2013
I have an AutoLISP program that hangs up for no apparent reason. I can run the program with an Alert in the loop. The program is a sheet generator, creating a border (insert with attributes), dimensions and MultiLeaders in Model Space, then a new Layout Tab is generated and the new elements are CHSPACEd into the new layout. An Alert temporarily halts the program once the task of a new Layout is created. In this form, the program works as designed. However, if I comment out the Alert, the program hangs up as if in an infinite loop. Also, hitting Escape does not cancel the AutoLISP, I must use Task Manager to end AutoCAD instead. My computer was recently upgraded to Win7 64-bit. I'm running 64-bit versions of software. (AutoCAD MAP 2011).
View 4 Replies
View Related
Oct 26, 2012
Photoshop CS 6 crashed twice this evening. Enclosed is the crash report:
Log Name: Application
Source: Application Error
Date: 10/26/2012 6:36:58 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: Hudechrome-PC
Description:
Faulting application name: Photoshop.exe, version: 13.0.1.0, time stamp: 0x5022da9d
Faulting module name: Photoshop.exe, version: 13.0.1.0, time stamp: 0x5022da9d
Exception code: 0xc0000005
Fault offset: 0x00000000013d0903
[code]....
Photoshop has been acting a bit strange. When I open it, I get about a 2 to3 second white screen before Photoshop finally loads. That's new.
The only changes I have made was to install a new 2T drive, copy over information from two smaller drives and remove them. These are strictly storage drives and have nothing to do with C drive or scratch.
I also have had an unscheduled reset to defaults occur recently.Finally PS persists in unchecking Open CL.
View 3 Replies
View Related
Apr 6, 2012
I purchased CS5.5 extended about 3 weeks ago and all was working fine. Just yesterday Photoshop started crashing whenever I try to open files. I've deleted preferences several times, validated my fonts, restarted my Mac, etc. all to no avail. Photoshop has become useless to me and it's part of how I make my living. InDesign seems to work OK but I haven't tried Illustrator yet.
Here is last night's crash report (half the time it crashes with no report).
Process: Adobe Photoshop CS5.1 [750]Path: /Applications/Adobe Photoshop CS5.1/Adobe Photoshop CS5.1.app/Contents/MacOS/Adobe Photoshop CS5.1Identifier: com.adobe.PhotoshopVersion: 12.1 (12.1x20110328.r.145) (12.1)Code Type: X86-64 (Native)Parent Process: launchd [121]
Date/Time: 2012-04-06 08:19:52.885 -0700OS Version: Mac OS X 10.6.8 (10K549)Report Version: 6
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
[code].....
View 2 Replies
View Related
Nov 13, 2008
I have a 8800 GTX and I've got my hands on PS CS4 but apparently, all that stuff of smooth and continuous zoom in and out, capability of tossing the image is not present on my machine. This may be a stupid question but, do I need to do something on the graphics card so that it will support the GPU improvement?
View 2 Replies
View Related
May 23, 2009
I'm just curious why Bridge would default to Fireworks for PNG files? I pretty much use PS exclusively for my image work and I'm not up to speed on FW at all. Is there something FW offers that I'm missing out on?
View 4 Replies
View Related
Oct 27, 2008
Opening a 640x480 8 bit .psd file stored on a local machine is taking 30 seconds or more...unless I unplug the network cable. Then it opens instantaneously. It can be any file; I've tested more than one.
While I'm waiting for the file to be opened, I can see short bursts of outbound network activity.
View 1 Replies
View Related
Oct 20, 2012
I upgraded from CS5 to CS6 when it was released. A couple of weeks ago I uninstalled both CS5 and an old version of Photoshop Elements v7 that had been on my machine.
Even though I use CS6 I just noticed that when I look for or open a PSD file from CS6 that my PSD files are defined in the "Type" column as follows "PhotoshopElements.PSDFile.7"
I no longer have Elements 7 on my machine and I'm concerned that there might be an artifact from that old app that is being used by CS6 instead of current versions of PSD.
How to confirm I am using only current CS6 PSD converions?
Environment: Windows 7, CS6, Lightroom 4.
View 3 Replies
View Related
Jan 13, 2009
I already set the frame delay to 0secs but when I "save as web design..." but when I save it as a .gif after this step, viewing in FIREFOX browser, the animated gif is not the original speed. It has some delay.
View 2 Replies
View Related
Oct 20, 2012
I upgraded from CS5 to CS6 when it was released. A couple of weeks ago I uninstalled both CS5 and an old version of Photoshop Elements v7 that had been on my machine.
Even though I use CS6 I just noticed that when I look for or open a PSD file from CS6 that my PSD files are defined in the "Type" column as follows "PhotoshopElements.PSDFile.7"
I no longer have Elements 7 on my machine and I'm concerned that there might be an artifact from that old app that is being used by CS6 instead of current versions of PSD.
How to confirm I am using only current CS6 PSD conversions?
Environment: Windows 7, CS6, Lightroom 4.
View 2 Replies
View Related
Nov 6, 2013
I never used DNG before and wanted to know if there are any benefits of converting my CR2 (Canon) into DNG? I also don't quite understand what settings should I use when converting?
View 36 Replies
View Related
Mar 3, 2014
My mute goes on at 1Hour& 3min into my project in audio 2 timeline. Premire pro 5 .
View 3 Replies
View Related
Nov 1, 2012
I put text on an image and for no apparent reason, GIMP condenses it (or at least displays it as if it's condensed) no matter what font I use. I can change everything else about the font, including kerning, but the letters stay narrow. This happens even with fonts that don't have a condensed variant.Plus, GIMP gets really slow. Normally it works at a tolerable speed but when it does the condensing letters thing it acts like I have a bunch of applications running, regardless of whether I have anything else open.
This is the second time GIMP has done this. The first time was a few months ago. I think it cleared up after a few days without any action on my part. But it is extremely irritating.
I took screenshots of various fonts. I didn't insert any line breaks. GIMP is wrapping text as if the fonts are the normal width, so I'm guessing it is mostly a display issue.
View 2 Replies
View Related
Nov 10, 2011
I have the testversion and i do some tests with Digital noise removal and a 10 megapixel Image and 0.3 megapixel image.
On my system, it happen that Paint shop wait around 4 sec and do nothing.then it begin to calculate and progress requester is show for around 1.5 sec
Can see when switch in task manager the CPU load refresh to high(4* /sec seem value update).when i choose a setting or i change a value it take always 4 sec until CPU load increase from idle % to full load.
I have also written a Bug report and suggest that Paint shop begin calc as soon as possible, and stop if a value is change and calc again soon as possible with new value.So all can work lots faster.currently i get no response.
The Smart Photo Fix, too have a delay before calc.It is 1 sec.I test with a 320*250 Pixel image (0.3 megapixel), here the additional delays are too in.
In the feature list X4 stand that it can use GFX Card to be faster.I have a gforce 6600 with older pixelshader.So i guess X4 use no GFX card.The render speed of all effects i think good, but the wait time make the usage of this program not fun. I think the X4 Version is great, very good denoise sharp and enhance photo functions.
View 5 Replies
View Related
Jan 22, 2013
Having problems dimensioning to an apparent intersection in an IDW?
Once I hover over both lines to show the intersect and both line do intersect but it should turn green, it's not, it just keeps yellow.
It is placing the dim in the right place but it's also not drawing in the intersect lines.
It was working last month as I have a drawing to prove it.This is on a few machines.
Also moving dimension is a problem. Sometimes they will not reattach after moving one end.
AIP2011 sp2
View 2 Replies
View Related
Mar 22, 2013
Is there a command out there that allows you to mirror objects from an apparent midpoint from like an otrack without physically drawing a line then having to erase it later? I thought there was a way to do it, but my memory is failing me.
View 1 Replies
View Related
Mar 16, 2012
In one of the columns, for different parts I have value *Varies* displayed instead of iproperty value that other parts display. Why?
View 3 Replies
View Related
Dec 4, 2012
I have a 3D polyline (blue in attached) for which I am trying to calculate the surface area. I use the area-->object command and get 1912342m2 in AutoCAD 2012. My colleague uses the same command in AutoCAD LT 2009 and gets 1807093m2. Due to the discrepancy, I roughly traced a polyline (yellow in attached) around the area in AutoCAD 2012 and I get approx. 1810000m2 so assumedly the AutoCAD LT 2009 version is giving the correct answer while my AutoCAD 2012 is not!
Why am I getting a different area for the polylines...is the difference is due to it being a 3D polyline? Is there a way I can ensure I obtain the correct area using the 3D polyline?
View 1 Replies
View Related
Jul 3, 2012
I'm using ACA 2008 and used to be able to pick two lines that didn't physically cross each other and use the trim command to trim them based on where they would cross if they extended to each other. But it doesn't seem to do it anymore.
Best way I can describe it is it used to trim at the apparent interest ion of where they would come together. I'm sure there's some easy fix to this, just don't know where it's at.
View 2 Replies
View Related
Feb 13, 2012
polylines in my current drawing have started to come out with a very fat line width. It doesnt matter what layer its on, even though previously they were drawn 'properly' i.e the thin line width that shows when you have show/hide lineweight on 'hide'. This doesnt happen on any other drawing tool (arc, circle, polygon etc). The lineweights in layer control are all 'default'. I can't explain this as it seems to have just happened. Is it a known bug or something?
View 2 Replies
View Related
Dec 27, 2012
URL....My logo on the file that i created it in looks perfect. When i create a new, blank AI file and paste it into it, it pastes as a faded version of my logo. I have gone through all the settings i could find between my two files and made them identical, it still happens. When i paste the logo into the same file it was created in it pastes correctly.
View 20 Replies
View Related
Mar 15, 2013
For some reason I am having problems exporting .CDR's to .JPG - I am using a custom page layout, 12x10" in landscape and have basically created 4 images with a 1" border around them by means of setting the page background to a plain colour and importing a .JPG to the desired size. This worked fine for two of my images, but, for some reason the other 2 images will not save as a 12 x 10 sized image, which means the 'border' is cropped on the two sides.
It's hair pulling out time for me as I have done the same process for two of the prints, but the other two will not stop cropping themselves in the export process.
View 4 Replies
View Related
Nov 9, 2011
I'm having a frequent but random problem with Multileaders where the landing distance will change on its own from its initial standard 1/8 inch to some relatively large negative distance which also causes the landing to disappear altogether. If I use the move trick for resetting all elevations to zero (Move 0,0,10e99 then 0,0,10e-99) the landing will reappear connecting the landing grip at the strange negative offset.
The problem seems only to happen when the leader is connected to the bottom right of the note.
When I remove the leader and add a new leader it appears correct but as soon as I save the drawing the affected Multileaders will again present this problem.
Windows 7 Professional 64-bit - Service Pack 1
Intel﴾R﴿ Core﴾TM﴿ i7-3820 CPU 3.60GHz; 16 GB DDR3 Dual Channel RAM
nVidia Quadro 4000; AutoCAD Civil 3D 2013, sp1
View 9 Replies
View Related
Feb 2, 2000
How can use the Osnap "APParent Intersect" into a Lisp.Others osnap options use only one point as CENter option below:
(setq pt2 (osnap pt1 "cen"))
But to use APParent Intersect ou Perpendicular is necessary two points.I've tried use:
(setq pt2 (osnap pt1 "app"))
(setq pt2 (osnap pt1 pt2 "app"))
(setq pt2 (osnap pt1 "app" pt2))
(setq pt2 (osnap "app" pt1 pt2))
View 9 Replies
View Related
Jul 29, 2013
I just converted a PDF file from a DWF file (from AutoCAD 2012). I also needed to print the PDF; unfortunatley, the PDF is taking forever to print.
This is what I did.
-I went under Plot-Model
-Under the Printer/plotter, I clicked DWG to PDF.pc3 and click on Properties
-Click under the Device and Document Settings tab
-Click on Custom Properties
-Click on Custom Properties buttom
-Under the DWG to PDF PRoperties table, I click on Capture all under Font Handling
-I uncheck Include Layer information under Additonal Output Setting
-I click ok
When I begin to plot under Batch Plot, I also went and click on Publish Options, and on that table under Layer information, I click on Don't include.
For some reason, it's printing very slow. I don't know what other option I have in order the print faster.
Here's the files for you to look at just in case [URL] .....
View 6 Replies
View Related
Feb 3, 2012
In the last three days, I lost hundreds of treatments. The photos from my folder disappeared with no reason.I have to import them again (they are on the hard drive) and work again on treatments.
I am using LR for years and it is the first time that it happens.
View 9 Replies
View Related
Oct 16, 2013
I cannot get pscc to access servers to download extention not even Kuler, i am trying to add on album DS
View 1 Replies
View Related
Jun 29, 2013
On OS X Mountain Lion the Photoshop Extensions Sub-Menu in CC is grey when I first launch. I believe this is the same as in CS5. But I think it is non-the-less a bug, because the delay in making that window available makes it appear that MiniBridge is not available, unless I wait and then come back to the menu.
View 5 Replies
View Related
Jun 17, 2013
None of my Adobe Extensions migrated. What do I do?
View 4 Replies
View Related