I know I can use "<[Geometry Point Entity Before Data(CP)]>" (or after...) .
But this text is tooooooooo long.
Is there any way to get only the :
- radius - length of segment. or - Spiral A ???
Maybe using expressions? In this case any hidden elements?
I know I can use segments or multiple segments but I want to do the work in only 1 labeling step ...
I'd like to view the parameters of my aligments elements near the geometry points. That is, the station and the radius value or spiral parameter (or what I want). I have explored the text & reference text but there is not R or A elements...
How is it possible ? C3D can detect the type of geometry poinr, so it would must to know R, Lenght,. A, etc....
In addition I 'd like to do it using the aligment label set.... sci-fi , isn't it ?
When you have to create plans, the aligments need to show a lot of information. Doing it manually is so boring..... (and in XXI century ...... )
Civil 3D (2013)
Just started a drawing in C3D 2013 using an existing template. If I draw an arc using the "Angle" rather than length or radius, entering the angle as 11.1601, then label the arc, the delta angle is converted to hms or 11.0936 . The template and labeling style are ones we've used for several releases. I've compared the feature settings, units and the curve labeling command and can not find where this is being changed.
View 8 Replies View RelatedHow to set change the radius to degrees in horizontal geometry band set profile.
View 2 Replies View RelatedI have an alignment and would only like to label stations and specific geometry points such as EC/BC. When I add geometry points to my label set it automatically gives me curve midpoints and beg/end of alignment. How can I turn off these labels so that I only get BC/EC?
View 1 Replies View RelatedI have an alignment for a natural gas pipeline.
I want to use the 'Create Points at Alignment Geometry' tool in order to label only the PIs. However, when I use the tool it creates two points (one called PI and one called CPI) at each vertex of the alignment. How can I fix this issue and toggle the creation of the various other geometry points?
I have an alignment label that I normally use to show the PVI's of a profile in the plan view.
This is a little unusual, but in a specific case I wanted to design my profile at one alignment, but show it at another. I designed my swale profile in the pathway profile view and then superimposed the swale profile on the swale profile view. I then went back to the swale alignment to add these labels.
It's a no-go AFAICT. The only profile available for me to select for these labels is the original ground profile from the surface.
I am using projected and sketched geometry (2D sketches) in assembly space to create lines/ points that I intend to use to define planes and axes. The problem I have is that nearly all the geometry I create (lines and points in 2D sketches) is not "selectable" when I try to create planes or axes. I cannot even put a work points "on top of" my sketch points. Why are my sketches not usable in the assembly space? Since the components in my model are just two extruded rings I don't have any linear edges I can select to make this work/ define planes.
View 9 Replies View RelatedI have recreated two surfaces for my design, existing and proposed. I had used polylines for contours for in each surface. I tried labeling the contours but it will not let me select the contour itself.
I then tried to make the contours to 3d polylines and again added them to the surface and rebuilt. I still am not allowed to label the contour since it doesn't let me select the polyline. I am able to select the surface however.
I'm looking for a way to determine (and preferably edit) the values of P1 and P2, the offsets of the initial tangents into the PC/PT of the shifted curve. It's not in the (admiteddly basic) book I have either.
[Edit: OK, after double-checking,I just found Widening offset clothoid, but I'm still none the wiser.]
I draw an alignment for road. I turned off design criteria and i used data from manual for my country Slovenia. I need spiral in, curve and spiral out on alignment. Finally i got that alignment. Then i insert sample lines along the alignment. Then i saved autocad civil 3d file and shut down the program. When i reopen file, i see that sample lines after the spiral in being erased. Sample lines stayed along first tangent, after that they were erased.
View 9 Replies View RelatedI need to reproduce an alignment shown on some plans. I have not had any luck finding a tutorial about how to re-create an existing alignment.
I have a page of plans, it shows the center line going from a back tangent, into a spiral, through a curve, and spiral to tangent. How do I create an alignment from this data?
Spiral Curve
Delta: 1d33'47"
Length: 250.00'
o=0.57'
t=125.00'
Total Curve:
Delta: 24d09'01"
T=10105.34'
L=2,181.34'
o=4582.63'
Main Curve
Delta: 21d01'27"
D=1d15'02"
R=4582.06'
L=1681.34'
Spiral Curve
Delta: 1d33'47"
L=250.00'
o=0.57'
t=125.00'
I am a surveyor and I'm having a hard time understanding the alignment creation tools, in my data collector it is much simpler, you enter the back tangent and the end radius and the length of spiral and whale, but I'm trying to build a corridor, so I can stake the dtm.
How can I make a curve's end points constrain to objects in order to create a "theta" angle line that changes dynamically when the angle between the two objects changes?
I thought they answer may have lay in creating the curve using Maya's new Bezier Curve tool, then using the Rivet plug-in from CreativeCrash to pin it to the middle of two poly cylinders (the "x" and "y" axis.) Unfortunately this doesn't work; the Script editor spits back "is not a vertex!". Either I'm not using Rivet correctly or the end points of a Bezier Curve in Maya are not the same as a CV Curve. But perhaps I'm going about this the wrong way entirely.. I ultimately would wish to extrude geometry about this curve to create a dynamically changing curved cylinder to visualize the angle. It seems like it should be a relatively simple thing to do...
Any way to label a pipe part way between structures? I would like to be able to label a sanitary line where a service ties in with the main line invert.
C3D 2013
I read through the previous posts but still I am not able to do this. I am using C3D 2012.
What I need to do is label Deflection angles of an alignment (delta angle). The alignment does not have any curve.
So basically it will be some kind of PI or geometry point label showing the deflection angle.
Labelling LT or RT would be great but at this time I dont need that.
I hope it explains.
I want to label the surface sections (eg, fg) in a single location something like what is shown in the attached image.
Currently I am using a major offset label which refers to the surface description* where the surface name is stored. I set the increment to a suitable number which results in multiple labels along the section. I then drag one into position and delete the rest using ctrl-select. While it would be far easier to use multileaders to acheive the correct look, they don't update location with the section views.
We use the description to store the 'friendly' name as our object naming standard wouldn't necessarily make sense to the viewer of the plans.
I am labeling structures in a network on the profile view. I cannot get the leader when i drag the label to anchor to the top of the structure? Is there a way to do this, i figured out how to have the label insert at the middle of the top line of the structure.
Civil 2014-Infrastructure Design Suite
Windows 7 Professional-SP 1-64 bit system
Intel Core i5-2500K cpu @ 3.3ghz
NVIDIA GeForce GT 430
8.0 gb ram
how label only the top of my road surface in section view? The road slopes -2% towards a ditch but my my code set labels both the top of road(-2%) and what I assume is the bottom of the road surface (2%) which I don't want to show.
Is it also possible to label my side slopes as 4:1 instead of 25%?
I'm running 2012. Is it still true that I need to label my contours in every drawing? I have a drawing that contains my existing surface (about 90 Acres). I have labeled the contours in that drawing. I then have a output drawing that the existing contours are a data shortcut. The contour labels do not show up.
View 3 Replies View RelatedLabeling lines with their azimuth, I wanted to label lines with their azimuth but sounds not to work. I got question marks instead (attached)
View 9 Replies View RelatedOften I've found myself dealing with some pretty complicated surfaces that have a lot of nooks and crannies, and many of the contour lines are only in a corner of the surface or are small and closed, and thus when I find myself wanting to have contour labels on all of the contours, there's not really one line I can draw using the "Create Multiple Labels at Interval" option to ensure that every contour is labeled. Thus I end up doing "Create Multiple At Interval" with a few different lines intersecting contours, but I often end up hitting some of the contours multiple times and I get a mess of labels.
I haven't been able to find a way to automatically just multiple labels on all of the contours at an interval in one fell swoop, so I started trying to program one...but then I got stuck with that, too.
Does any built-in method of doing what I want to do, or do I need to continue pursuing a programmatic solution?
How can I make better the second labeling precision in Civil 3D? It's only has four digits precision for the seconds. I did change the ambient settings (Lat Long precision to 8) but haven't got the result.
View 4 Replies View Related I have a drainage model, the data for which has been imported from microdrainage into Civil3d (.sws file) .
The engineer working on the project is playing around with the Invert and Cover levels so I reload the same updated .sws file into my model almost daily expecting the information shown in the labels of the pipes and manholes to simply change. Instead mine seem to disappear and I have to relabel the whole network again.
This wouldn't be much of a problem because labeling only takes a few minutes but with this particular scheme, the client wants the labels shown in a box with a leader. When I relabel, the boxes automatically snap to the center of the manholes without a leader and i then have to drag each one away from the manhole to get the leader to show up.
Where do I set the contour labeling line to not show or be on layer defpoints. When I click on the label line and right click I can edit the contour label line properties and change the Display contour label line to false but not sure where the style is.
View 9 Replies View RelatedIs there away to label (Dynamically) slope arrows and percents on a tin surface (Without Exploding it)?
View 8 Replies View RelatedHow can I show the description (in this case, MUDSTONE) in a profile label? I've tried modifying the style but the description refuses to appear even though it is one of the available labels.
View 3 Replies View RelatedWhen I draw in the profile layout I'm getting odd results when the labeling is placed. See attachment. I have been looking through the styles trying to find what is wrong.
View 9 Replies View RelatedEverytime I use the label line command, when I go to plot my drawing I see a box around my label and the label is either chopped off or missing. A rectangle prints out around where the label is.
View 9 Replies View Relatedwhy a line drawn perpendicular to a spiral curve in C3D is not radial? If so, what is it perpendicular to? It can result in several feet of difference.
Also, labeling an alignment along a spiral using the automatic routines appears to run perpendicular (whatever that is - not radial).
Perhaps I'm not looking at the math right (its been awhile since spiral curves in college) but it seems to me that a curve of diminishing radius should be labeled radially. Is that not how C3D sees it?
The only other thing I can think is that C3D is running perpendicular to the small tangents or arcs that it puts in to approximate a spiral curve.
C3D - 2014, Sincpac Addon
I have got a drawing with an alignment containing spiral-curve-spiral entities. I need to find what type of spirals are used in these entities - clothoids, cubic parabolas or other. Is there any way, to find it? In panorama and sub-entity editor there is only spiral description without exact type.
View 2 Replies View RelatedI have a job where there are 3 round pipes and one elliptical pipe going into the same structure. When I put a label on the structure, it shows all 4 pipes, but I can't figure a way to show the elliptical pipe dimensions as 29x45; It only comes in as 45" RCP. I have tried to manipulated the text, but it won't let me me change the individual pipe text in the structure label. When I change the label to read Height x Width, the round pipes show the same as elliptical pipe. Is there a way for my label to show 3 round and 1 elliptical pipe size, or do I have to manually add the elliptical pipe size (which I'd prefer not to do)?
View 9 Replies View Related