AutoCAD Civil 3D :: Labeling Round And Elliptical Pipes
Jun 11, 2013
I have a job where there are 3 round pipes and one elliptical pipe going into the same structure. When I put a label on the structure, it shows all 4 pipes, but I can't figure a way to show the elliptical pipe dimensions as 29x45; It only comes in as 45" RCP. I have tried to manipulated the text, but it won't let me me change the individual pipe text in the structure label. When I change the label to read Height x Width, the round pipes show the same as elliptical pipe. Is there a way for my label to show 3 round and 1 elliptical pipe size, or do I have to manually add the elliptical pipe size (which I'd prefer not to do)?
View 9 Replies
ADVERTISEMENT
Jun 6, 2013
I have a job where there are 3 round pipes and one elliptical pipe going into the same structure. When I put a label on the structure, it shows all 4 pipes, but I can't figure a way to show the elliptical pipe dimensions as 29x45; It only comes in as 45" RCP. I have tried to manipulated the text, but it won't let me me change the individual pipe text in the structure label. When I change the label to read Height x Width, the round pipes show the same as elliptical pipe. Is there a way for my label to show 3 round and 1 elliptical pipe size, or do I have to manually add the elliptical pipe size (which I'd prefer not to do)?
I've attached a pdf of the structure in question.
View 2 Replies
View Related
Apr 20, 2011
Is there a way to label multiple structures/pipes at one time in profile view? We have tried selecting all at one time, right click and add label, but it only labels one of the structures/pipes.
View 4 Replies
View Related
Oct 1, 2013
I need to put a 42 x 29 Arch Pipe in my drawing. I found a 44 x 27 in the elliptical arch catalog. But I can't get it to let me create one that's 42 x 29.
And I'm also having trouble making a label for it. This is one of three culvert pipes in this network. The other two are round 36" CMP. The label for those says XX' of 36" POLY-COATED CMP @ x.xx%. Once I need the label for this third pipe to show as XX' of 42" x 29" ARCH PIPE @ x.xx%.
When I tried to make the label style, I saw "Pipe Inner Diameter or Width". But I didn't see one for height.
View 1 Replies
View Related
Jul 10, 2012
I have recreated two surfaces for my design, existing and proposed. I had used polylines for contours for in each surface. I tried labeling the contours but it will not let me select the contour itself.
I then tried to make the contours to 3d polylines and again added them to the surface and rebuilt. I still am not allowed to label the contour since it doesn't let me select the polyline. I am able to select the surface however.
View 1 Replies
View Related
Sep 26, 2013
Any way to label a pipe part way between structures? I would like to be able to label a sanitary line where a service ties in with the main line invert.
C3D 2013
View 7 Replies
View Related
Feb 9, 2012
I read through the previous posts but still I am not able to do this. I am using C3D 2012.
What I need to do is label Deflection angles of an alignment (delta angle). The alignment does not have any curve.
So basically it will be some kind of PI or geometry point label showing the deflection angle.
Labelling LT or RT would be great but at this time I dont need that.
I hope it explains.
View 9 Replies
View Related
Oct 8, 2013
I want to label the surface sections (eg, fg) in a single location something like what is shown in the attached image.
Currently I am using a major offset label which refers to the surface description* where the surface name is stored. I set the increment to a suitable number which results in multiple labels along the section. I then drag one into position and delete the rest using ctrl-select. While it would be far easier to use multileaders to acheive the correct look, they don't update location with the section views.
We use the description to store the 'friendly' name as our object naming standard wouldn't necessarily make sense to the viewer of the plans.
View 8 Replies
View Related
Sep 26, 2013
I am labeling structures in a network on the profile view. I cannot get the leader when i drag the label to anchor to the top of the structure? Is there a way to do this, i figured out how to have the label insert at the middle of the top line of the structure.
Civil 2014-Infrastructure Design Suite
Windows 7 Professional-SP 1-64 bit system
Intel Core i5-2500K cpu @ 3.3ghz
NVIDIA GeForce GT 430
8.0 gb ram
View 1 Replies
View Related
Jun 21, 2012
how label only the top of my road surface in section view? The road slopes -2% towards a ditch but my my code set labels both the top of road(-2%) and what I assume is the bottom of the road surface (2%) which I don't want to show.
Is it also possible to label my side slopes as 4:1 instead of 25%?
View 4 Replies
View Related
Mar 15, 2013
I'm running 2012. Is it still true that I need to label my contours in every drawing? I have a drawing that contains my existing surface (about 90 Acres). I have labeled the contours in that drawing. I then have a output drawing that the existing contours are a data shortcut. The contour labels do not show up.
View 3 Replies
View Related
Jul 26, 2013
Labeling lines with their azimuth, I wanted to label lines with their azimuth but sounds not to work. I got question marks instead (attached)
View 9 Replies
View Related
Nov 6, 2013
Often I've found myself dealing with some pretty complicated surfaces that have a lot of nooks and crannies, and many of the contour lines are only in a corner of the surface or are small and closed, and thus when I find myself wanting to have contour labels on all of the contours, there's not really one line I can draw using the "Create Multiple Labels at Interval" option to ensure that every contour is labeled. Thus I end up doing "Create Multiple At Interval" with a few different lines intersecting contours, but I often end up hitting some of the contours multiple times and I get a mess of labels.
I haven't been able to find a way to automatically just multiple labels on all of the contours at an interval in one fell swoop, so I started trying to program one...but then I got stuck with that, too.
Does any built-in method of doing what I want to do, or do I need to continue pursuing a programmatic solution?
View 5 Replies
View Related
Aug 17, 2012
How can I make better the second labeling precision in Civil 3D? It's only has four digits precision for the seconds. I did change the ambient settings (Lat Long precision to 8) but haven't got the result.
View 4 Replies
View Related
Jun 11, 2013
I have a drainage model, the data for which has been imported from microdrainage into Civil3d (.sws file) .
The engineer working on the project is playing around with the Invert and Cover levels so I reload the same updated .sws file into my model almost daily expecting the information shown in the labels of the pipes and manholes to simply change. Instead mine seem to disappear and I have to relabel the whole network again.
This wouldn't be much of a problem because labeling only takes a few minutes but with this particular scheme, the client wants the labels shown in a box with a leader. When I relabel, the boxes automatically snap to the center of the manholes without a leader and i then have to drag each one away from the manhole to get the leader to show up.
View 7 Replies
View Related
Feb 11, 2010
Where do I set the contour labeling line to not show or be on layer defpoints. When I click on the label line and right click I can edit the contour label line properties and change the Display contour label line to false but not sure where the style is.
View 9 Replies
View Related
Sep 10, 2013
Is there away to label (Dynamically) slope arrows and percents on a tin surface (Without Exploding it)?
View 8 Replies
View Related
Sep 4, 2013
How can I show the description (in this case, MUDSTONE) in a profile label? I've tried modifying the style but the description refuses to appear even though it is one of the available labels.
View 3 Replies
View Related
Mar 6, 2012
When I draw in the profile layout I'm getting odd results when the labeling is placed. See attachment. I have been looking through the styles trying to find what is wrong.
View 9 Replies
View Related
Oct 4, 2013
Everytime I use the label line command, when I go to plot my drawing I see a box around my label and the label is either chopped off or missing. A rectangle prints out around where the label is.
View 9 Replies
View Related
Sep 4, 2012
Just started a drawing in C3D 2013 using an existing template. If I draw an arc using the "Angle" rather than length or radius, entering the angle as 11.1601, then label the arc, the delta angle is converted to hms or 11.0936 . The template and labeling style are ones we've used for several releases. I've compared the feature settings, units and the curve labeling command and can not find where this is being changed.
View 8 Replies
View Related
Nov 17, 2013
We recently started using Civil3d 2013. We made a huge jump from LDD 2008. We have profiles designed and data short cuts are created. We have existing and proposed.
Now i've created a reference and brought them into another drawing. First I tried to set up the color and linetype for each profile. When I do this. Both the existing and proposed become the same color and linetype.I do not see how to select the existing from the proposed and set the color and linetype.
Next I select the proposed profile and right click and select Edit Labels. I start to create the PVI labels. When I do this the PVI's for the existing profile get labeled. I want the proposed profile labeled. Not the existing.
View 3 Replies
View Related
Sep 5, 2013
I have multiple alignments. When I create a section view group I would like a label at the top or bottom that is the alignment name. I cant find this option and I'm certain it exists!
View 6 Replies
View Related
Jul 3, 2012
I have a bunch of lines that are created with multiple segments. I'd like to annotate the total length. I can't figure out to do this without labelling each segment along the line using Line and Curve commands. How do I get one annotation that only shows the total of all the sements?
View 9 Replies
View Related
Mar 28, 2013
have a good style to label cross sections at profile grade, top of curb, bottom of curb, grade breaks, and back of walks? Do I set a point or something in my assembly to use to label those points?
View 1 Replies
View Related
May 16, 2012
I've added an extended Figure Property to a Survey Database called 'WegAsNaam' (Name of the Road).
Filled this attribute on several Survey Figures and now want to Label this Extended Property which should be able in Civil 3D 2013.
I don't see my own created Extended Figure Property in the Label Style composer to choose?
View 3 Replies
View Related
Aug 25, 2011
Curve tags number okay but the line tags keep numbers when curves are in between. Happens in both 2011 and 2012.
View 1 Replies
View Related
Sep 12, 2013
I know I can use "<[Geometry Point Entity Before Data(CP)]>" (or after...) .
But this text is tooooooooo long.
Is there any way to get only the :
- radius - length of segment. or - Spiral A ???
Maybe using expressions? In this case any hidden elements?
I know I can use segments or multiple segments but I want to do the work in only 1 labeling step ...
View 2 Replies
View Related
Apr 26, 2012
Is there a way to display vertices and elevation points of featurelines so I can see where to apply labels to individual segments? Without the markers it is a trial and error process of placing labels, then picking the line to activate the grips to see if I missed any segments.
I know I could create a label style that labels all the vertices but that just adds clutter. I'd really like to see some sort of marker if possible.
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
View 1 Replies
View Related
May 9, 2012
As shown in the attached drawing, the station label where the superelevation transitions back into normal crown shows with 4 decimal places. We have verified that all precisions are set to 0.01ft. The normal crown station at the begin transition shows with 2 decimal places.
Civil 3D 2013 SP1
Dell T3500 Workstation
Intel Xeon E5630 @ 2.53 GHz
12 Gig of RAM
Nvidia Quadro FX3800
Window 7 x 64bit OS
View 2 Replies
View Related
Sep 5, 2012
Using the Best Practices, different components in their own DWG files, all brought together in a production sheet where I can place the labeling for that sheet. I can add labels for Surfaces, Alignments, Pipe networks, through the Xref(s). Evidently this was not extended to Intersection Objects.
What I'm doing now is creating a new Intersection at each street intersection just so I can get a label which shows the station of each alignment at the intersection. Is there a better way to do this?
View 3 Replies
View Related
