I've added an extended Figure Property to a Survey Database called 'WegAsNaam' (Name of the Road).
Filled this attribute on several Survey Figures and now want to Label this Extended Property which should be able in Civil 3D 2013.
I don't see my own created Extended Figure Property in the Label Style composer to choose?
I have a survey figure that no matter what will not come in with the correct elevations, its a spline (continous) curve that the elevations get blow up on.
Only thing I can think of is the when it starts to interpolate the curve it cant get the elevations correct, this only happens in the curved area, once it goes tangent everything goes back to normal.
C3D11
C3D12-13
Win7x64 6gb
When bringing in some figures that don't match the figure prefix database in a drawing with a set default style for figures (settings tab>survey>edit feature settings) it is being ignored and the "standard" style is being created and used. Is there another setting?
(running C3D 2012 sp4, Win7 64bit, 8GB)
I have a survey figure in plan view that I want to project to a profile. I have a projection style set, and the command settings use this style. When I project the figure to the profile, nothing shows up.
If I try it again, the command tells me that an object already exists in the profile and will update it. What am I doing wrong? What is the correct procedure to project these lines to a profile?
I am happy that survey figures now have the long awaited "linetype generation" on in 2013 but sometimes I need it off. Is there a toggle or am I now STUCK with it on all the time?
View 2 Replies View RelatedI created new linework code to test and now I want to delete them from my toolspace but I do not get an option to delete.
View 2 Replies View RelatedI have a client who uses Bently MX Roads for road design and requires that survey data be supplied in GENIO format. I realise that there are many possible options to get Civil3D survey data into MX, but I am trying to explore the use of the Subscription Extension to Import/Export GENIO.
Surfaces - no problem. Points - I see how I can get that to work. But the only linework that can be exported is Feature Lines, and it is also important that the feature lines have a name (likely related to the layer it is on).
I can convert survey figures to feature lines and name them one by one but would be very time consuming for a whole survey. Is there any way of doing all figures at once?
I'm guessing not and that it is probably easier to do the Genio creation from dwg in MX itself.
Civil3D 2014 - Windows7 64bit
Recently I upgraded to 2013 and I been having some issues with my survey DB, first of all I created a base data shortcuts project template folder with all my folders and a default Survey DB.
once I create my project, and import points to the default DB, I have no access to the Figure Properties. Is this feature, that worked in 11 & 12 now broken in 13? I have gone into the setting and copied a new files to the folder several times, to no avail, and there are no other versions of C3D on this machine.
So now that I have my points in the drawing, I go to translate them to my survey, generally I will utilize line in the drawing between field data, and platted data to translate and rotate to the platted lot or lots and the work from there on any calcs or changes. However, when my OSNAP toolbar is docked and locked and I go to select a point line the midpoint, I have no access to the OSNAPS. This also, worked in 11 & 12, but seems broken in 13.
I just discovered survey figure groups and am playing around with them. Great way to bring certain figures in & out. What seems crazy is that I have to check them on/off one at a time. Am I missing something or is this the only way to add figures to a figure group?
View 2 Replies View RelatedI am wondering if it's possible to have a point code automatically add data to a user-defined field either in the survey database or in a drawing. For instance, our surveyors currently will code a catch basin as CB INV2.2 if it has an invert depth of 2.2'. I have a survey point user-defined property called InvertDepth. Is it possible to get the survey database to automatically add 2.2 to that user-defined property or does that have to be manually input? I have an expression and a label style that will take the elevation shot and subtract the depth number to give me the invert elevation on a lable, but I'd like to see if this can be done automatically without having to manually type in the depth on every point that is a catch basin or other inlet.
I've looked into the description key-set's parameters, but they seem to be mostly for display purposes and writing a full description.
I am using AutoCAD Civil 3D 2011. I am wondering if there is a way to assign an mline to a figure style in the Figure Prefix Database. Ultimately I am trying to create storm drains that have a width automatically (ex. 12" SD would come in at 12"). Right now I have a single center line that comes in and I manually offset the line to create a width or I place an mline over the center line.
View 2 Replies View Relatedi am following the new feature of CIVIL3D 2013. i have some problems with making user defined properties.
when i make a lable style for figure, lable style should be selected.
But i don't know how to make a properties for text of lable style.
see image below. i select the add labels of annotate ribon -> figur -> add figure labels -> edit section of line label style -> layout tap -> contents below text -> you can see the owership which is user defined properties.how to make that properties?
I copied some Survey Data of AutoCAD Civil 3D 2013 for Surveyors to my C3D 2013 machine few weeks ago. Now I cannot do the "Import point file" of the Survey2 Data B in Survey Databases, because the Survey2 Data B is locked up - see the attached file that has a red circle with an arrow on. How I can unlocked the locked Survey 2 Data in the Survey Databases.
View 1 Replies View Relatedhere's my process:
1- Import the asc file into my drawing.
2- Convert the asc file to a FBK file
3- Import my FBK file. The survey figure linework generated doesn't overlay my previously imported asc file. I checked the FBK file and the coord's match the asc file. I'm confused as to why the survey figures don't overlay the survey points from the asc file, since the coords match in both? The survey figures are all shifted .7' and 54deg. from the points. The elevations are all good on the survey figures, as they match the survey points.
So my quick fix is to explode the survey figures, since I don't really need them for what I'm doing, and then select all the 3d polylines and move them to them to an appropriate survey point. Everything then looks fine and I can get the job done.
However, I would like some insight as to why this might be happening. It's strange that the FBK and asc coordinates match, but the survey figures aren't lying over them.
Possible to add custom fields to an AutoCAD object and be able to view those fields and contens in the extended data tab on the properties palette?
If it's not possible with VBA is it possible with .NET?
I need getting the crossing point for a survey figure relative to an alignment. I'm trying to use the IntersectWith on my active alignment. I'm able to see my figure in debug mode so, I think I've got access to each survey figure. I think I need to cast the figure as a com object to a acad entity using directcast, but that's where it's going bad. When using the ofigure.GetObjectId it returns an integer value and it fails in VS Express 2010 in the DirectCast when trying to pass the objectId.
The error (if I'm setting this up correctly) :integer cannot be converted to objectid
'Get figure crossing point Dim ofigures As AeccSurveyFigures = oSurveyProject.Figures 'Dim figEnt As Autodesk.AutoCAD.DatabaseServices.Entity Dim intPoint As New Point3dCollection() For i = 1 To ofigures.Count - 1 Dim ofigure As AeccSurveyFigure = ofigures.Item(i) Dim figObjectId = ofigure.GetObjectId Dim figEntity As Autodesk.AECC.Interop.Survey.AeccSurveyFigure = DirectCast(m_trans.GetObject(figObjectId, OpenMode.ForRead), Autodesk.AutoCAD.DatabaseServices.Entity) m_alignment.IntersectWith(figEntity, Intersect.OnBothOperands, intPoint, IntPtr.Zero, IntPtr.Zero) Next
I am trying to work on my figure database and have run into an issue I don't understand. Curious as to weather or not it's something I am doing, or just a bug.
I wanted to look at every possible line that could be imported so I created a dummy point file using the Figure prefix data base and imported it into one of my blank templates and ran into to curious issues.
Issue 1
CP is connecting to AA
Issue 2
OC only connects if the point has an identifier behind the OC, for example OC01.
Here is a copy of the figure database and point file I am using. I understand you will not have my layers, but the connectivity should be the same. Let me know if you need anything else.
using CIvil3D to figure volumes. I have a very large aerial topo from a couple years ago to compare against a topographical survey I completed this year. No problem creating surfaces.
Question: In the topo's, I need to get a volume from two different areas....one area being a fill area, the other being the borrow area. Don't want any volume data throughout the rest of the site.
Do I just create one large surface for each topo and designate boundaries somehow? Or do I need to create multiple surfaces for each topo? If this is the case, will I need to make sure any breaklines, etc. don't cross from one area to the other?
Why are figure line styles and feature line styles not shared, or a parent / child relationship? Also, should match properties change the style of a feature line to appear to be the same style as the figure line? The style only exists in as a figure line style.
If we offset a Figure line (feature line stepped offset) we get feature line, then we match properties to a figure line that has the correct style. The prospector says the Feature line has the style of the figure line; however, if we edit the feature line properties the style is set to none.
I have recreated two surfaces for my design, existing and proposed. I had used polylines for contours for in each surface. I tried labeling the contours but it will not let me select the contour itself.
I then tried to make the contours to 3d polylines and again added them to the surface and rebuilt. I still am not allowed to label the contour since it doesn't let me select the polyline. I am able to select the surface however.
[URL]
You said that there is no need to flatten, but each method I have tried does not produce a polyline with curves.
I tried:
survfig.BaseCurve
survfig.BaseCurve.GetProjectedCurve
survig.BaseCurve.GetOrthoprojectedCurve
If if manually flatten the figure using a dummy suface with the AeccFeatureElevsFromSurf command, the polyline derived from survfig.BaseCurve will then have actual arc segments.
Is there another method or a way to flatten the figure programatically first?
I am running Autocad Civil 3D 2012. I created a figure prefix database that our surveyors were familiar when coding in the field. It is a numeric code list. I received a survey last week that had 6 break lines coded in the point file. Only one of the 6 acts as a break line.
All break lines start and stop with the right line work commands but they fail to break crossing triangle legs. I've checked everything I can think of and the setup looks correct . The only difference between the one break line that works and the others is that break line has sequential point numbers while the other break line codes are scattered throughout the point file.
I have Figure prefix of GPNT for painted gas line and GP desciption key for Guy Pole. Imported survey text file, linework for GPNT came in correctly but at each shot the symbol for GP (Guy Pole) came in. Is there a way to fix that without creating a description key for GPNT. Have others with the same situation. Wanted to avoid adding description keys for items that were displayed all the same.
Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600
the properties palette started only showing the current properites for the drawing and not the properties of the entity selected. what causes this i am using autocad civil 3d 2013.
View 9 Replies View RelatedAny way to label a pipe part way between structures? I would like to be able to label a sanitary line where a service ties in with the main line invert.
C3D 2013
I read through the previous posts but still I am not able to do this. I am using C3D 2012.
What I need to do is label Deflection angles of an alignment (delta angle). The alignment does not have any curve.
So basically it will be some kind of PI or geometry point label showing the deflection angle.
Labelling LT or RT would be great but at this time I dont need that.
I hope it explains.
I want to label the surface sections (eg, fg) in a single location something like what is shown in the attached image.
Currently I am using a major offset label which refers to the surface description* where the surface name is stored. I set the increment to a suitable number which results in multiple labels along the section. I then drag one into position and delete the rest using ctrl-select. While it would be far easier to use multileaders to acheive the correct look, they don't update location with the section views.
We use the description to store the 'friendly' name as our object naming standard wouldn't necessarily make sense to the viewer of the plans.
I am labeling structures in a network on the profile view. I cannot get the leader when i drag the label to anchor to the top of the structure? Is there a way to do this, i figured out how to have the label insert at the middle of the top line of the structure.
Civil 2014-Infrastructure Design Suite
Windows 7 Professional-SP 1-64 bit system
Intel Core i5-2500K cpu @ 3.3ghz
NVIDIA GeForce GT 430
8.0 gb ram
how label only the top of my road surface in section view? The road slopes -2% towards a ditch but my my code set labels both the top of road(-2%) and what I assume is the bottom of the road surface (2%) which I don't want to show.
Is it also possible to label my side slopes as 4:1 instead of 25%?
I'm running 2012. Is it still true that I need to label my contours in every drawing? I have a drawing that contains my existing surface (about 90 Acres). I have labeled the contours in that drawing. I then have a output drawing that the existing contours are a data shortcut. The contour labels do not show up.
View 3 Replies View RelatedLabeling lines with their azimuth, I wanted to label lines with their azimuth but sounds not to work. I got question marks instead (attached)
View 9 Replies View Related