AutoCAD Civil 3D :: Labeling Lines With Their Azimuth
Jul 26, 2013Labeling lines with their azimuth, I wanted to label lines with their azimuth but sounds not to work. I got question marks instead (attached)
View 9 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Labeling Tin Lines On Surface
Sep 10, 2013Is there away to label (Dynamically) slope arrows and percents on a tin surface (Without Exploding it)?
View 8 Replies View RelatedAutoCAD Civil 3D :: Labeling Lines Command
Oct 4, 2013Everytime I use the label line command, when I go to plot my drawing I see a box around my label and the label is either chopped off or missing. A rectangle prints out around where the label is.
View 9 Replies View RelatedAutoCAD Map 3D :: Creating Lines Using Azimuth?
Jun 19, 2008I have been creating lines using an azimuth and distance by using the transparent command 'zd. I recently tried entering an azimuth of 299.8 and it does not work. It just keeps repeating the "enter azimuth" command. I tried typing 299 for the azimuth and it created the line, but would not work when I typed 299.8.
View 2 Replies View RelatedAutoCAD Civil 3D :: How To Get Azimuth Label On Line
May 29, 2012how I can get an azimuth label on my line?
View 5 Replies View RelatedAutoCAD Civil 3D :: Customizing Reports - South Azimuth Direction?
Jun 3, 2013is there maybe an error in the XSL?
Here is my alignment, correctly labelled in South Azimuth:
Before customising, the Alignment_Curve report gives me this:
AutoCAD Visual LISP / AutoLISP :: Labeling Lines With Lengths
Mar 2, 2012Labeling lines with their lengths,
I got the attached lisp file from the web which automatically labels the lines with their length. Resulting the values of the length in the absolute values of the length instead of saying that the length is in inch. i.e, i need to remove the inch sign (") from the suffix of the length.
AutoCAD Civil 3D :: Deriving Counter Clockwise Azimuth From Clockwise
Jul 28, 2013Deriving “counter clockwise” azimuth from “clockwise,I’m wondering if there is a technique to automatically derive the counter clockwise azimuth from the clockwise or vice versa.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD Visual LISP / AutoLISP :: Dimension Building - Labeling Multiple Lines At Once
Sep 20, 2012How to write an AUTOLisp program to label building dimensions. With Civil3d 2013 preventing me from labeling multiple lines at once, creating building labels to dimension complex building exteriors is much more complicated than it needs to be. Lisp Routine that Generates a MText or Dtext dimension centered on a line and offset to be clear of the line. the layer for this piece of text would always be "DIMS-BLDG" and the text style will always be "L50s."
the text doesn't have to be organized as it is in this example. the main focus is the layer being correct with the foot mark, precision set to xx.x and oriented to the line.
AutoCAD Civil 3D :: Contour Labeling
Jul 10, 2012I have recreated two surfaces for my design, existing and proposed. I had used polylines for contours for in each surface. I tried labeling the contours but it will not let me select the contour itself.
I then tried to make the contours to 3d polylines and again added them to the surface and rebuilt. I still am not allowed to label the contour since it doesn't let me select the polyline. I am able to select the surface however.
AutoCAD Civil 3D :: Labeling A Pipe Between Structures
Sep 26, 2013Any way to label a pipe part way between structures? I would like to be able to label a sanitary line where a service ties in with the main line invert.
C3D 2013
AutoCAD Civil 3D :: Labeling Deflections On Alignment
Feb 9, 2012I read through the previous posts but still I am not able to do this. I am using C3D 2012.
What I need to do is label Deflection angles of an alignment (delta angle). The alignment does not have any curve.
So basically it will be some kind of PI or geometry point label showing the deflection angle.
Labelling LT or RT would be great but at this time I dont need that.
I hope it explains.
AutoCAD Civil 3D :: Labeling Surface Section
Oct 8, 2013I want to label the surface sections (eg, fg) in a single location something like what is shown in the attached image.
Currently I am using a major offset label which refers to the surface description* where the surface name is stored. I set the increment to a suitable number which results in multiple labels along the section. I then drag one into position and delete the rest using ctrl-select. While it would be far easier to use multileaders to acheive the correct look, they don't update location with the section views.
We use the description to store the 'friendly' name as our object naming standard wouldn't necessarily make sense to the viewer of the plans.
AutoCAD Civil 3D :: Labeling Structures In A Network?
Sep 26, 2013I am labeling structures in a network on the profile view. I cannot get the leader when i drag the label to anchor to the top of the structure? Is there a way to do this, i figured out how to have the label insert at the middle of the top line of the structure.
Civil 2014-Infrastructure Design Suite
Windows 7 Professional-SP 1-64 bit system
Intel Core i5-2500K cpu @ 3.3ghz
NVIDIA GeForce GT 430
8.0 gb ram
AutoCAD Civil 3D :: Corridor Section Labeling
Jun 21, 2012how label only the top of my road surface in section view? The road slopes -2% towards a ditch but my my code set labels both the top of road(-2%) and what I assume is the bottom of the road surface (2%) which I don't want to show.
Is it also possible to label my side slopes as 4:1 instead of 25%?
AutoCAD Civil 3D :: Labeling Contours In Every Drawing
Mar 15, 2013I'm running 2012. Is it still true that I need to label my contours in every drawing? I have a drawing that contains my existing surface (about 90 Acres). I have labeled the contours in that drawing. I then have a output drawing that the existing contours are a data shortcut. The contour labels do not show up.
View 3 Replies View RelatedAutoCAD Civil 3D :: Labeling All Of Surface Contours At Once?
Nov 6, 2013Often I've found myself dealing with some pretty complicated surfaces that have a lot of nooks and crannies, and many of the contour lines are only in a corner of the surface or are small and closed, and thus when I find myself wanting to have contour labels on all of the contours, there's not really one line I can draw using the "Create Multiple Labels at Interval" option to ensure that every contour is labeled. Thus I end up doing "Create Multiple At Interval" with a few different lines intersecting contours, but I often end up hitting some of the contours multiple times and I get a mess of labels.
I haven't been able to find a way to automatically just multiple labels on all of the contours at an interval in one fell swoop, so I started trying to program one...but then I got stuck with that, too.
Does any built-in method of doing what I want to do, or do I need to continue pursuing a programmatic solution?
AutoCAD Civil 3D :: Make Better The Second Labeling Precision
Aug 17, 2012How can I make better the second labeling precision in Civil 3D? It's only has four digits precision for the seconds. I did change the ambient settings (Lat Long precision to 8) but haven't got the result.
View 4 Replies View RelatedAutoCAD Civil 3D :: Pipe Network Labeling
Jun 11, 2013 I have a drainage model, the data for which has been imported from microdrainage into Civil3d (.sws file) .
The engineer working on the project is playing around with the Invert and Cover levels so I reload the same updated .sws file into my model almost daily expecting the information shown in the labels of the pipes and manholes to simply change. Instead mine seem to disappear and I have to relabel the whole network again.
This wouldn't be much of a problem because labeling only takes a few minutes but with this particular scheme, the client wants the labels shown in a box with a leader. When I relabel, the boxes automatically snap to the center of the manholes without a leader and i then have to drag each one away from the manhole to get the leader to show up.
AutoCAD Civil 3D :: Setting Contour Labeling
Feb 11, 2010Where do I set the contour labeling line to not show or be on layer defpoints. When I click on the label line and right click I can edit the contour label line properties and change the Display contour label line to false but not sure where the style is.
View 9 Replies View RelatedAutoCAD Civil 3D :: Labeling Profile With Description
Sep 4, 2013How can I show the description (in this case, MUDSTONE) in a profile label? I've tried modifying the style but the description refuses to appear even though it is one of the available labels.
View 3 Replies View RelatedAutoCAD Civil 3D :: Profile Layout Labeling
Mar 6, 2012When I draw in the profile layout I'm getting odd results when the labeling is placed. See attachment. I have been looking through the styles trying to find what is wrong.
View 9 Replies View RelatedAutoCAD Civil 3D :: Labeling Round And Elliptical Pipes
Jun 11, 2013I have a job where there are 3 round pipes and one elliptical pipe going into the same structure. When I put a label on the structure, it shows all 4 pipes, but I can't figure a way to show the elliptical pipe dimensions as 29x45; It only comes in as 45" RCP. I have tried to manipulated the text, but it won't let me me change the individual pipe text in the structure label. When I change the label to read Height x Width, the round pipes show the same as elliptical pipe. Is there a way for my label to show 3 round and 1 elliptical pipe size, or do I have to manually add the elliptical pipe size (which I'd prefer not to do)?
View 9 Replies View RelatedAutoCAD Civil 3D :: Labeling - Arc Using The Angle Rather Than Length Or Radius
Sep 4, 2012Just started a drawing in C3D 2013 using an existing template. If I draw an arc using the "Angle" rather than length or radius, entering the angle as 11.1601, then label the arc, the delta angle is converted to hms or 11.0936 . The template and labeling style are ones we've used for several releases. I've compared the feature settings, units and the curve labeling command and can not find where this is being changed.
View 8 Replies View RelatedAutoCAD Civil 3D :: Labeling Profiles From Data References
Nov 17, 2013We recently started using Civil3d 2013. We made a huge jump from LDD 2008. We have profiles designed and data short cuts are created. We have existing and proposed.
Now i've created a reference and brought them into another drawing. First I tried to set up the color and linetype for each profile. When I do this. Both the existing and proposed become the same color and linetype.I do not see how to select the existing from the proposed and set the color and linetype.
Next I select the proposed profile and right click and select Edit Labels. I start to create the PVI labels. When I do this the PVI's for the existing profile get labeled. I want the proposed profile labeled. Not the existing.
AutoCAD Civil 3D :: Labeling Round / Elliptical Pipes
Jun 6, 2013I have a job where there are 3 round pipes and one elliptical pipe going into the same structure. When I put a label on the structure, it shows all 4 pipes, but I can't figure a way to show the elliptical pipe dimensions as 29x45; It only comes in as 45" RCP. I have tried to manipulated the text, but it won't let me me change the individual pipe text in the structure label. When I change the label to read Height x Width, the round pipes show the same as elliptical pipe. Is there a way for my label to show 3 round and 1 elliptical pipe size, or do I have to manually add the elliptical pipe size (which I'd prefer not to do)?
I've attached a pdf of the structure in question.
AutoCAD Civil 3D :: Section View Group Labeling?
Sep 5, 2013I have multiple alignments. When I create a section view group I would like a label at the top or bottom that is the alignment name. I cant find this option and I'm certain it exists!
View 6 Replies View RelatedAutoCAD Civil 3D :: Labeling A Line With Multiple Segments As One Segment?
Jul 3, 2012I have a bunch of lines that are created with multiple segments. I'd like to annotate the total length. I can't figure out to do this without labelling each segment along the line using Line and Curve commands. How do I get one annotation that only shows the total of all the sements?
View 9 Replies View RelatedAutoCAD Civil 3D :: Cross Sections - Labeling Offset And Elevations?
Mar 28, 2013have a good style to label cross sections at profile grade, top of curb, bottom of curb, grade breaks, and back of walks? Do I set a point or something in my assembly to use to label those points?
View 1 Replies View RelatedAutoCAD Civil 3D :: Labeling Extended Survey Figure Properties
May 16, 2012I've added an extended Figure Property to a Survey Database called 'WegAsNaam' (Name of the Road).
Filled this attribute on several Survey Figures and now want to Label this Extended Property which should be able in Civil 3D 2013.
I don't see my own created Extended Figure Property in the Label Style composer to choose?
AutoCAD Civil 3D :: Line Label Tags Not Labeling Consecutively
Aug 25, 2011Curve tags number okay but the line tags keep numbers when curves are in between. Happens in both 2011 and 2012.
View 1 Replies View Related