AutoCAD Civil 3D :: Profile Layout Labeling
Mar 6, 2012When I draw in the profile layout I'm getting odd results when the labeling is placed. See attachment. I have been looking through the styles trying to find what is wrong.
View 9 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Labeling Profile With Description
Sep 4, 2013How can I show the description (in this case, MUDSTONE) in a profile label? I've tried modifying the style but the description refuses to appear even though it is one of the available labels.
View 3 Replies View RelatedAutoCAD Civil 3D :: Labeling Grades Of Profile At Specific Station?
Jun 4, 2013how to label Profile Grades at a certain station other than high points, low points, pvis...etc?
I need to label an offset station with profile grades and cant seem to figure it out.
Civil 3D 2013
AutoCAD Civil 3D :: Labeling Multiple Structures / Pipes In Profile View
Apr 20, 2011Is there a way to label multiple structures/pipes at one time in profile view? We have tried selecting all at one time, right click and add label, but it only labels one of the structures/pipes.
View 4 Replies View RelatedAutoCAD Civil 3D :: Labeling Pipe Structure On Profile With Multiple Networks?
May 7, 2013I have an existing pipe network and a proposed pipe network. When I label a structure in my profile view, how do I combine the different network information? (Or do you usually have one network for both proposed and existing?)
For example, I have an existing pipe that will remain, but I will replace the structure and connect it to new pipes. On my label, I want to label proposed structure, pipes, and existing pipe using italics.
AutoCAD Civil 3D :: Labeling Centerline Existing Ground & Profile Grade Elevations?
Mar 28, 2012I am trying to label existing ground & profile grade on my cross-sections the way old Land 4 used to do it. I've muddled through section view property style settings, band settings, group properties w/no luck. It can't possible be this difficult. What am I missing?
View 5 Replies View RelatedAutoCAD Civil 3D :: Deflection Angles Labeling In Alignments In Band Set Or Profile View
Jun 23, 2012How to show the deflection anglesof alignments. I want to show those angles in band set or profile view.
AutoCAD Civil 3D 2012 SP 2
AutoCAD Civil 3D :: Profile Layout Tools
Sep 2, 2010I am trying to layout a road profile. I have created a profile view with my existing surface. I select "Create Profile View By Layout" in the pulldown to create my vertical road geometry and I get the Profile Layout Tools pop-up but all the buttons are greyed out so I can't do anything with it. I am using C3D 2008.
View 3 Replies View RelatedAutoCAD Civil 3D :: Plan And Profile Layout
Apr 30, 2012Is there any chance to fit plan and profile on one 11x17 layout without exploding and export to dwg? I can't do it because of annotation scale that change every time.
View 4 Replies View RelatedAutoCAD Civil 3D :: Profile Layout Tools - Grayed Out
Jul 30, 2013Is this still an issue in Civil 3D 2014? (Looks like it's been broke since Civil 3D 2007). URL.....
View 9 Replies View RelatedAutoCAD Civil 3D :: Plan And Profile Sheet Layout?
Apr 9, 2013When creating plan and profile sheets is it possible to create the plan view with the alignment moved down to show more of project above the alignment? The default setting puts the alignment at the center of the plan view window.
View 2 Replies View RelatedAutoCAD Civil 3D :: Create Profile Layout From Feature Line
Oct 4, 2012I want to create a profile layout by feature line. Is it possible?I have a pipe about 3 miles long, an alignment along the pipe, and a provie view showing the exisitng surface and pipe network. The pipe network was created from a feature line. I projected the feature line to the profile.
This is why I want to do this: I need to label the horizontal and vertical angle points of the pipe in plan view. I crated a style that shows the station and elevation. I want the elevation to reference the profile. But it only gives me the elevation of the surface and I need the top of pipe elevation.
I tried crate profile by layout and traced over the top of the pipe in profile but its 3 miles and it will take a long time. How to get what I want done faster?
AutoCAD Civil 3D :: Layout Profile Offset And Dynamic Values?
Aug 12, 2013I have seen "offset" and "update mode" for a layput profile.
Civil 3D (2013) how much you have to improve....
AutoCAD Civil 3D :: Change Profile Type That Has File Assigned To It To Layout?
Jul 15, 2013Is there any way to change a Profile Type that has "File" assigned to it to"Layout"?
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
AutoCAD Civil 3D :: Creating Layout Tabs For Plan And Profile Sheets
Dec 18, 2013I am running civil 3D 2014 and have several lisp file that I have added to my startup suite. I am creating layout tabs for plan and profile sheets and use my lisps continuously and then all of the sudden it tell me that it's an "unknown command". I have closed the program and reopened the drawing an I realized that my start up suite is now empty.
View 2 Replies View RelatedAutoCAD Civil 3D :: Create Sheet Drawing That Has Two Plan Or Profile Views On Same Layout?
May 27, 2013I would like to create a sheet drawing that has two plan views or two profile views on the same layout?
View 2 Replies View RelatedAutoCAD Civil 3D :: Targeting Offset Alignment Layout Profile With Corridor Lane Assembly
Jul 19, 2012For some reason I cant seem to target an offset alignment layout profile with my corridor lane assembly. I can target the existing the existing groundprofile with the same offset alignment, but the layout profile when targetted does not change the lane in my cross sections. I can do this with civil 3d 2010, but not 2012. I have tried other lane sub-assemblies and it doesn't make a difference.
View 9 Replies View RelatedAutoCAD Civil 3D :: Contour Labeling
Jul 10, 2012I have recreated two surfaces for my design, existing and proposed. I had used polylines for contours for in each surface. I tried labeling the contours but it will not let me select the contour itself.
I then tried to make the contours to 3d polylines and again added them to the surface and rebuilt. I still am not allowed to label the contour since it doesn't let me select the polyline. I am able to select the surface however.
AutoCAD Civil 3D :: Labeling A Pipe Between Structures
Sep 26, 2013Any way to label a pipe part way between structures? I would like to be able to label a sanitary line where a service ties in with the main line invert.
C3D 2013
AutoCAD Civil 3D :: Labeling Deflections On Alignment
Feb 9, 2012I read through the previous posts but still I am not able to do this. I am using C3D 2012.
What I need to do is label Deflection angles of an alignment (delta angle). The alignment does not have any curve.
So basically it will be some kind of PI or geometry point label showing the deflection angle.
Labelling LT or RT would be great but at this time I dont need that.
I hope it explains.
AutoCAD Civil 3D :: Labeling Surface Section
Oct 8, 2013I want to label the surface sections (eg, fg) in a single location something like what is shown in the attached image.
Currently I am using a major offset label which refers to the surface description* where the surface name is stored. I set the increment to a suitable number which results in multiple labels along the section. I then drag one into position and delete the rest using ctrl-select. While it would be far easier to use multileaders to acheive the correct look, they don't update location with the section views.
We use the description to store the 'friendly' name as our object naming standard wouldn't necessarily make sense to the viewer of the plans.
AutoCAD Civil 3D :: Labeling Structures In A Network?
Sep 26, 2013I am labeling structures in a network on the profile view. I cannot get the leader when i drag the label to anchor to the top of the structure? Is there a way to do this, i figured out how to have the label insert at the middle of the top line of the structure.
Civil 2014-Infrastructure Design Suite
Windows 7 Professional-SP 1-64 bit system
Intel Core i5-2500K cpu @ 3.3ghz
NVIDIA GeForce GT 430
8.0 gb ram
AutoCAD Civil 3D :: Corridor Section Labeling
Jun 21, 2012how label only the top of my road surface in section view? The road slopes -2% towards a ditch but my my code set labels both the top of road(-2%) and what I assume is the bottom of the road surface (2%) which I don't want to show.
Is it also possible to label my side slopes as 4:1 instead of 25%?
AutoCAD Civil 3D :: Labeling Contours In Every Drawing
Mar 15, 2013I'm running 2012. Is it still true that I need to label my contours in every drawing? I have a drawing that contains my existing surface (about 90 Acres). I have labeled the contours in that drawing. I then have a output drawing that the existing contours are a data shortcut. The contour labels do not show up.
View 3 Replies View RelatedAutoCAD Civil 3D :: Labeling Lines With Their Azimuth
Jul 26, 2013Labeling lines with their azimuth, I wanted to label lines with their azimuth but sounds not to work. I got question marks instead (attached)
View 9 Replies View RelatedAutoCAD Civil 3D :: Labeling All Of Surface Contours At Once?
Nov 6, 2013Often I've found myself dealing with some pretty complicated surfaces that have a lot of nooks and crannies, and many of the contour lines are only in a corner of the surface or are small and closed, and thus when I find myself wanting to have contour labels on all of the contours, there's not really one line I can draw using the "Create Multiple Labels at Interval" option to ensure that every contour is labeled. Thus I end up doing "Create Multiple At Interval" with a few different lines intersecting contours, but I often end up hitting some of the contours multiple times and I get a mess of labels.
I haven't been able to find a way to automatically just multiple labels on all of the contours at an interval in one fell swoop, so I started trying to program one...but then I got stuck with that, too.
Does any built-in method of doing what I want to do, or do I need to continue pursuing a programmatic solution?
AutoCAD Civil 3D :: Make Better The Second Labeling Precision
Aug 17, 2012How can I make better the second labeling precision in Civil 3D? It's only has four digits precision for the seconds. I did change the ambient settings (Lat Long precision to 8) but haven't got the result.
View 4 Replies View RelatedAutoCAD Civil 3D :: Pipe Network Labeling
Jun 11, 2013 I have a drainage model, the data for which has been imported from microdrainage into Civil3d (.sws file) .
The engineer working on the project is playing around with the Invert and Cover levels so I reload the same updated .sws file into my model almost daily expecting the information shown in the labels of the pipes and manholes to simply change. Instead mine seem to disappear and I have to relabel the whole network again.
This wouldn't be much of a problem because labeling only takes a few minutes but with this particular scheme, the client wants the labels shown in a box with a leader. When I relabel, the boxes automatically snap to the center of the manholes without a leader and i then have to drag each one away from the manhole to get the leader to show up.
AutoCAD Civil 3D :: Setting Contour Labeling
Feb 11, 2010Where do I set the contour labeling line to not show or be on layer defpoints. When I click on the label line and right click I can edit the contour label line properties and change the Display contour label line to false but not sure where the style is.
View 9 Replies View RelatedAutoCAD Civil 3D :: Labeling Tin Lines On Surface
Sep 10, 2013Is there away to label (Dynamically) slope arrows and percents on a tin surface (Without Exploding it)?
View 8 Replies View RelatedAutoCAD Civil 3D :: Labeling Lines Command
Oct 4, 2013Everytime I use the label line command, when I go to plot my drawing I see a box around my label and the label is either chopped off or missing. A rectangle prints out around where the label is.
View 9 Replies View Related
