how to label Profile Grades at a certain station other than high points, low points, pvis...etc?
I need to label an offset station with profile grades and cant seem to figure it out.
Civil 3D 2013
I am trying to get the existing and proposed grade from my surfaces to show up in the center bottom of my cross sections. I am working with the CL elevations band style and trying to set up so that major and minor increments are the surface elevations. Am I going about this wrong? I went in to the compose label tab and selected for the text to be section 1 elevation and section 2 elevation. When I am at the section view properties box / bands tab, all that shows up is my existing surface. I have created sample lines and a corridor. I have also created a surface from the corridor.
View 1 Replies View RelatedI am having a problem with moving my profile grades. I go to Utilities under Corridors and create a profile for the left and right curb. They show up in my Alignment Profile, but when I click on one to move it, it disappears. When I type regen, it shows back up. I am trying to set my crossection grades in my Multiple Section Views. I first create my Profile from Surface, then do a proposed centerline grade by Draw tangents with curves. I create the corridor, put in the regions, go to corridor properties and pick the right and left corridor lines I have created. Then I set the existing surface and attach it to my profile. I create the sample lines and the Multi Section Views. Where am I screwing up?
View 4 Replies View RelatedIs there a way to label or list a station at a specific elevation? I know how to list and label an elevation at a given station but I need to know where a specific (given) elevation is located on an alignment or profile. I don't care if this is listed or labeled on the alignment or profile, I just need to be able to get a station at a given elevation.
View 5 Replies View RelatedHow can I show the description (in this case, MUDSTONE) in a profile label? I've tried modifying the style but the description refuses to appear even though it is one of the available labels.
View 3 Replies View RelatedWhen I draw in the profile layout I'm getting odd results when the labeling is placed. See attachment. I have been looking through the styles trying to find what is wrong.
View 9 Replies View RelatedIs there a way to label multiple structures/pipes at one time in profile view? We have tried selecting all at one time, right click and add label, but it only labels one of the structures/pipes.
View 4 Replies View RelatedI have an existing pipe network and a proposed pipe network. When I label a structure in my profile view, how do I combine the different network information? (Or do you usually have one network for both proposed and existing?)
For example, I have an existing pipe that will remain, but I will replace the structure and connect it to new pipes. On my label, I want to label proposed structure, pipes, and existing pipe using italics.
I have a station equation in my alignment that happens to fall in a vertical curve in my profile. I'm using the PVC and PVT station and elevations from the plans and the K value to draw a Fixed Vertical Curve. It doesn't seem to be taking into consideration the station equation. It is calculating the wrong PVI station and elevation.
View 8 Replies View RelatedIs there a way to force the Low Point or High Point in a vertical curve to a specific and precise station?
I can do it with grips, but it's imprecise. In the project I am currently working on, I have some leeway regarding the slopes into and out of the vertical curve, so I have some flexibility, but some of the LPs and HPs need to precise.
Windows 7-64
8GB RAM
AutoCAD Civil 3D 2013
I am trying to label existing ground & profile grade on my cross-sections the way old Land 4 used to do it. I've muddled through section view property style settings, band settings, group properties w/no luck. It can't possible be this difficult. What am I missing?
View 5 Replies View RelatedHow to show the deflection anglesof alignments. I want to show those angles in band set or profile view.
AutoCAD Civil 3D 2012 SP 2
I am using LISP in C3D 2012. I am trying to get the station and elevation of a point I pick in a profile view. I found the Method that will get that info, but I can';t seem to get the syntax right.This is the Method;
HRESULT FindStationAndElevationAtXY(
[in] double X,
[in] double Y,
[out] double * pStation,
[out] double * pElevation,
[out, optional] VARIANT * pInBounds
[code]...
They are read-only, so seem to reflect the start and end of the profile tangents.Would you ever not set those to the alignment start and end stations?
I tried setting them to stations before and after the alignment start and end stations, that did not allow me to reach my goal of allowing addition of PVI's before alignment start and after end.
I know you can have the profile extend beyond the alignment, it works fine if you add the PVI's with the C3D toolbar.I can't figure out how to do it with the API though.
I have a profile view created with several surfaces including a proposed surface. The stationing on the X-Axis of the profile view corresponds correctly with the PT's, PC's etc on the proposed surface profile, however the the labels that are actually on the profile line are giving me values such as PC: 0+668.62 when it should read 21+93.63.
I can't seem to find a correlation in the two numbers and am having difficulty changing the style to correctly reflect the stationing.
I can label the superimposed profile but c3d uses the stations of main profile of profile view.
Thinking on the future.... c3D can have the ability of use superelevation values to calculate the right values of superimposed profiles ?
I've attached two screenshots of my issue. I simply need to change my major station from 1000' interval to 500' interval. As you can see from the screen caps, I can manage to get the band details on the stations I want, through a workaround, but the vertical gridlines get all messed up.
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
I have set one station equation in my alignment and it displays correctly in horizontal view and in profile. But stations of projected objects after that equation are not correct in projected object label. It displays station values as it would be without station equation. If i manually insert profile view label for that point it is correct.
As you can see in attached image green station value (that one is label for projected points) is wrong because it does not take equation into calculation. How to make projected objects labels to consider station equation?
Is there anyway to display Alignment Station Offset Label at Profile View because sometimes i want to display where is the phisical noze location in profile view also my attached file display what i have in my label and how display my label in profile view.
View 7 Replies View RelatedI was editing a profile yesterday and when I chose the grips, it offered me the station or elevation which I could edit. C3d crashed and now after 3 restarts, I cannot get the SE grips. I only get polar tracking when using grip edits.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
This is using Civil 3D 2012 Service Pack 2.1
When a Station Equation is added to an alignment it causes all of the profile views to get messed up. In addition once the EG profile changes the entire FG profile may also need to be changed. See this video I uploaded to Youtube that fully explains and shows the problem: [URL] ........
So, any way to some how lock the profile views start and end stations? Or to some how lock the PVI locations on a a proposed profile to certain stations?
how to update the information? I revised the pipe alignment but the profile did not update the station. WHat steps do I need to perform?
View 1 Replies View RelatedHow to get automaticly data on the profile. See my road profile in attachment.
Now i have to manually write data of elevation of existing and future ground and distance.
i think that is possible automaticly, but i dont know how.
When we are producing cross sections through our surfaces, the chainages are every 10m, and the level at these chainages. This is fine in some cases, but when you have batter slopes, you want a level at the top of slope, and bottom of slope. How do you get the chainages at these areas. I have attached a sample image, showing a dashed line where I want a chainage and level in the bands. Is there a way to do this?
EDIT: The attached section is produced from an alignment through the surfaces,
I can't seem to get my profile start and end station labels to appear even after I checked "Label start station" and "label end station" in the profile view properties.
View 2 Replies View RelatedThe project I am working on requires shoulders sloperd at -1.5% to -3.0%. Is it possible to set up an assembly and corridor to cut anything above -1.5% and fill anything below -3.0%?
If I can show both the cut and fill in the same drawing, that would be ideal.
AutoCAD Civil 3D 2012
Any way to raise/lower a surface, but is there a way to offset a surface basically 1m (to make it easy) perpendicular to all grades? Because when you raise/lower a surface, if you have a 3:1 slope, it will raise/lower it vertical 1m or so, but then the perpendicular distance between the 2 surfaces is less then 1m.
View 9 Replies View Relatedusing Civil 3d version 2012...Want to add existing and proposed profile grades to cross sections for the eastbound and westbound lanes. I have an alignment established for each
View 2 Replies View RelatedWe have recently upgrading from 2012 to 2014. Several of our jobs are not reading the surface when we open the drawing. We have to force the sync of the surface and then the grades display.
AutoCAD Civil 3D 2014
HP Z620 Workstation 64-bit
Duel Intel Xeon E5-2620 @ 2.00 GHz
Ram: 48 GB
can i use the "methods supported" " FindXYAtStationAndElevation" to retrieve a elevation and station from a profile view?
View 4 Replies View RelatedI have recreated two surfaces for my design, existing and proposed. I had used polylines for contours for in each surface. I tried labeling the contours but it will not let me select the contour itself.
I then tried to make the contours to 3d polylines and again added them to the surface and rebuilt. I still am not allowed to label the contour since it doesn't let me select the polyline. I am able to select the surface however.
