AutoCAD Civil 3D :: Profile Starting And Ending Station?

Mar 11, 2008

They are read-only, so seem to reflect the start and end of the profile tangents.Would you ever not set those to the alignment start and end stations?

I tried setting them to stations before and after the alignment start and end stations, that did not allow me to reach my goal of allowing addition of PVI's before alignment start and after end.

I know you can have the profile extend beyond the alignment, it works fine if you add the PVI's with the C3D toolbar.I can't figure out how to do it with the API though.

View 9 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Changing Alignment Label Sets Starting Station

Sep 19, 2011

Is it possible to modify a label set to a new starting station, e.g., instead of the alignment starting at 0, change it to start at 100?

View 9 Replies View Related

AutoCAD Civil 3D :: Station Equation In Profile?

Aug 8, 2013

I have a station equation in my alignment that happens to fall in a vertical curve in my profile.  I'm using the PVC and PVT station and elevations from the plans and the K value to draw a Fixed Vertical Curve.  It doesn't seem to be taking into consideration the station equation.  It is calculating the wrong PVI station and elevation. 

View 8 Replies View Related

CorelDRAW Graphics Suite X5 :: Ending Line And Starting Another Immediately?

Feb 6, 2013

I've noticed that when you press the space key to end a line when you drawing with the bézier tool, it automatically takes you to the pick tool. So if you want to draw another line right away, you have to switch back to the bézier tool. It would be nicer to have a one-step means of doing this. Does any exist?

View 7 Replies View Related

AutoCAD Civil 3D :: Getting Station And Elevation From Profile View

Oct 31, 2012

I am using LISP in C3D 2012.  I am trying to get the station and elevation of a point I pick in a profile view.  I found the Method that will get that info, but I can';t seem to get the syntax right.This is the Method;

HRESULT FindStationAndElevationAtXY(
    [in] double X,
    [in] double Y,
    [out] double * pStation,
    [out] double * pElevation,
    [out, optional] VARIANT * pInBounds
[code]...

View 4 Replies View Related

AutoCAD Civil 3D :: Profile View Station Labels

May 23, 2012

I have a profile view created with several surfaces including a proposed surface.  The stationing on the X-Axis of the profile view corresponds correctly with the PT's, PC's etc on the proposed surface profile, however the the labels that are actually on the profile line are giving me values such as PC: 0+668.62 when it should read 21+93.63. 

I can't seem to find a correlation in the two numbers and am having difficulty changing the style to correctly reflect the stationing.  

View 2 Replies View Related

AutoCAD Civil 3D :: Label Superimposed Profile With Its Station Data?

May 13, 2013

I can label the superimposed profile but c3d uses the stations of main profile of profile view.

Thinking on the future.... c3D can have the ability of use superelevation values to calculate  the right values of superimposed profiles ? 

View 1 Replies View Related

AutoCAD Civil 3D :: Change Profile Major Station Interval

May 28, 2013

I've attached two screenshots of my issue. I simply need to change my major station from 1000' interval to 500' interval. As you can see from the screen caps, I can manage to get the band details on the stations I want, through a workaround, but the vertical gridlines get all messed up.

Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3

View 2 Replies View Related

AutoCAD Civil 3D :: Projected Objects Station In Profile View

Nov 25, 2011

I have set one station equation in my alignment and it displays correctly in horizontal view and in profile. But stations of projected objects after that equation are not correct in projected object label. It displays station values as it would be without station equation. If i manually insert profile view label for that point it is correct.

As you can see in attached image green station value (that one is label for projected points) is wrong because it does not take equation into calculation. How to make projected objects labels to consider station equation?

View 3 Replies View Related

AutoCAD Civil 3D :: Labeling Grades Of Profile At Specific Station?

Jun 4, 2013

how to label Profile Grades at a certain station other than high points, low points, pvis...etc?

I need to label an offset station with profile grades and cant seem to figure it out. 

Civil 3D 2013

View 7 Replies View Related

AutoCAD Civil 3D :: Alignment Station Offset In Profile View

Apr 27, 2013

Is there anyway to display Alignment Station Offset Label at Profile View because sometimes i want to display where is the phisical noze location in profile view also my attached file display what i have in my label and how display my label in profile view.

View 7 Replies View Related

AutoCAD Civil 3D :: Grip Edit Profile Station / Elevation

Jul 26, 2013

I was editing a profile yesterday and when I chose the grips, it offered me the station or elevation which I could edit. C3d crashed and now after 3 restarts, I cannot get the SE grips. I only get polar tracking when using grip edits.

Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post

View 1 Replies View Related

CorelDRAW Graphics Suite X6 :: Fountain Fill Starting Ending XY Coordinates And Using Perspective Effect

Jul 24, 2013

I'm thinking that once the perspective tool is enable the starting/ending coordinates of the fountain fill should lock relative to the shape.  What ya think?

As a work around you can position the to be perspective guide shape so the starting/ending coordinates of the fountain fill at least fall close?

cs_setInnerHtml('video_5c40a7a1-4b00-4e4c-aca5-47f306588bdd','');

View 3 Replies View Related

AutoCAD Civil 3D :: Station Equations - Lock Profile Views Start And End Stations?

Oct 5, 2012

This is using Civil 3D 2012 Service Pack 2.1

When a Station Equation is added to an alignment it causes all of the profile views to get messed up. In addition once the EG profile changes the entire FG profile may also need to be changed. See this video I uploaded to Youtube that fully explains and shows the problem: [URL] ........

So, any way to some how lock the profile views start and end stations? Or to some how lock the PVI locations on a a proposed profile to certain stations?

View 2 Replies View Related

AutoCAD Civil 3D :: Pipe Profile Station Label Shows Question Mark

Jun 21, 2012

how to update the information? I revised the pipe alignment but the profile did not update the station. WHat steps do I need to perform?

View 1 Replies View Related

AutoCAD Civil 3D :: Data Of Existing / Future Ground And Station On Profile Of Road

Dec 18, 2013

How to get automaticly data on the profile. See my road profile in attachment.

Now i have to manually write data of elevation of existing and future ground and distance.

i think that is possible automaticly, but i dont know how.

View 2 Replies View Related

AutoCAD Civil 3D :: Get Profile Start And End Labels To Appear Even After Checked Label Start Station

Feb 22, 2012

I can't seem to get my profile start and end station labels to appear even after I checked "Label start station" and "label end station" in the profile view properties.

View 2 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Getting Station And Elevation From Profile View?

Mar 22, 2013

can i use  the "methods supported"   " FindXYAtStationAndElevation" to retrieve a elevation and station from a profile view?

View 4 Replies View Related

Illustrator :: Adjust Starting Point Anchor Of A Variable Width Profile?

Mar 19, 2013

I want it to be a variable stroke, so I loaded up “Width Profile 2” in the profiles. The trouble I am having, is that Illustrator defaults to start the larger dots in the bottom right hand corner, and I would like the “starting point” to be in the middle of the line if you know what I mean. I'm still happy for the dots to start big, then gradually decrease in size, but I want to control where the “beginning” is.

View 2 Replies View Related

AutoCAD Civil 3D :: Manually Adding A Station

May 4, 2012

All I want is to manually add a station in between to other stations.... ie I can produce this-->
 
However I would prefer to produce this -->

Which has an additional station added as required from time to time.

View 3 Replies View Related

AutoCAD Civil 3D :: Reusable Cut Volume By Station

Oct 22, 2012

Within my road corridor, I have one section where the excavated material cannot be used as fill elsewhere.  I see a place where I can specify a factor for reusable volume when I compute earthwork materials.  But it looks like I can only use 1 factor for the whole corridor.  Is there a way to say from Sta XX+XX to Sta XX+XX the reusable fill factor is 0, but the rest of the project it is something else?

All I can think to do is copy the quantity report to Excel and manually change the reusable volume in that station range to 0.  But, since the report comes in as just numbers (no formulas), I then have to enter all the formulas to recalculate the volumes.

View 1 Replies View Related

AutoCAD Civil 3D :: How To Edit Station Labels

Mar 28, 2012

First - the alignment station label text size when viewed in model space is fine but when viewed in paper space it comes in way to big. How do i adjust this so i see things in paper space as they are in the model?

Second - Would like to adjust the station label style from the defalt 0+00.00 to 0+000.000

View 3 Replies View Related

AutoCAD Civil 3D :: Alignment Station Modification

Nov 21, 2012

When an alignment needs to have stationing modified, what is the best process for this when a proposed grade line and corridor have been established?  I know the proposed grade line can be edited via edit profile geometry>profile grid view. 

But what from I have found each station has to be modified individually, which is cumbersome.  I would hope to be able to modify the proposed grade line by changing only the beginning station and the rest would update, similar to the alignment.

C3D 2011, (latest updates)
Win 7 Pro, 64-bit
16 GB RAM 

View 8 Replies View Related

AutoCAD Civil 3D :: Station Label Update

Sep 5, 2013

I have a problem with some station labels I have, when I open the drawing(s) the labels display ??? instead of the station. After I manually sync the alignment in prospector, the drawing switches to the model tab with the ? now showing correctly.

View 2 Replies View Related

AutoCAD Civil 3D :: Zoom To A Station On Alignment?

Jan 15, 2013

Like entering a station and going there?I've used the 'SO with Zoom C. That is not simple.12+ miles of a single road alignment with 3 equation stations makes for a LOT of panning.

View 4 Replies View Related

AutoCAD Civil 3D :: Multiple Station In One Label

Oct 30, 2012

Im trying to make a label that will call out pipe replacement in reference to an alignment. I know how to call out from multiple alignments, but I need multiple stations from the same alignment, such as sta xxx to sta xxx.

Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3

View 8 Replies View Related

AutoCAD Civil 3D :: How To Get Station Label Increment

Aug 13, 2012

I have an alignment that starts at station 1+00 and runs through 20+00.

By right clicking the station labels and editing the label group, I have updated my major station increments to 200' and my minor stations (ticks only) to 100'. The problem is, I want the 200' increments to begin at my starting station (1+00), so that the labels would read 1+00, 3+00, 5+00, etc.

As it is now, the above settings make my labels read: 1+00, 2+00, 4+00, 6+00, etc.

View 5 Replies View Related

AutoCAD Civil 3D :: Adding A Station Equation

Jul 20, 2012

I'm trying to figure out the best way to split an alignment so that I do not disturb the stationing of the alignment beyond a station equation.  I have a very long alignment with a finaized design.  I have a design change to make, which means I need to move a section of the alignment, and I want to do it without changing the stationing past a defined point so that it does not affect the design (corridor) past that point.

View 7 Replies View Related

AutoCAD Civil 3D :: Add Station And Offset To A Point

Jan 7, 2013

I currently have a drawing with a road alignment and stationing.  Is there a way to automatically station and offset a point that is not on the alignment line?  

For instance, our alignment line is the centerline of the road.  I need a station and offset of the new right of way line points at different places in the drawing.  I want to use the alignment stationing to have it automatically create the station and offset at the point I choose.

View 4 Replies View Related

AutoCAD Civil 3D :: Station / Offset Label FIX

May 29, 2013

When I am in the file with the labels everything is the proper size.  When I reference this file into my sheet file everything becomes tiny. Any legitimate solution?

View 9 Replies View Related

AutoCAD Civil 3D :: Re-Station Alignment After Editing?

Jan 13, 2013

After editing an alignment in my drawing the stationing did not update to the new edited alignment. I tried selecting the alignment and in alignment properties changing the end stationing, but I get the error "Either outside alignment limits or within gap created by a station equation". The stationing stops at my first edit point 66+24 when the total length of edited alignment is 103+15. Is there a way to re-station alignment.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved