AutoCAD Civil 3D :: Profile Layout Tools - Grayed Out
Jul 30, 2013Is this still an issue in Civil 3D 2014? (Looks like it's been broke since Civil 3D 2007). URL.....
View 9 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Profile Layout Tools
Sep 2, 2010I am trying to layout a road profile. I have created a profile view with my existing surface. I select "Create Profile View By Layout" in the pulldown to create my vertical road geometry and I get the Profile Layout Tools pop-up but all the buttons are greyed out so I can't do anything with it. I am using C3D 2008.
View 3 Replies View RelatedAutoCAD Civil 3D :: Can't Find Layout Elements That Are Supposed To Be In Layout Tools Tab
Feb 27, 2013I have a bit of a problem with Autocad map 3d 2012. When i try to insert a scale bar or a north arrow or any other carthographic element i simply can't find the layout elements that are supposed to be in layout tools tab. I've done a lot of research online and can't come up with anything.
View 2 Replies View RelatedAutoCAD Civil 3D :: Layout Tools Panel
May 20, 2013When I switch to a layout there is a panel "Layout Tools" that grabs focuse. I've never had it before, where/how I turn it off?
View 6 Replies View RelatedAutoCAD Civil 3D :: Turn Off Layout Tools Contextual Tab
Feb 4, 2013Is there any way to turn off Layout Tools Contextual Tab in 2013? I tried the same options that worked for 2013, but it didn't work on 2013.
View 1 Replies View RelatedAutoCAD Civil 3D :: 2012 - Turn Off Layout Tools Contextual Tab
May 3, 2011How do I disable the layout Tools Contextual tab in Civile3d 2012 so that is does not become active every time I change to Paper Space. I would like the ribbon to stay focused on the HOME tab when in paper space.
View 9 Replies View RelatedAutoCAD Civil 3D :: Rail Track Layout - Productivity Tools
Oct 12, 2012After installing and running the Rail Track Layout tool, the only turnouts that are available are European turnouts. Is there a way to get the standard US turnouts?
View 2 Replies View RelatedAutoCAD Civil 3D :: Parcel Layout Tools To Set A Minimum Frontage And Lot Sizing
Dec 7, 2005I have been using the parcel layout tools to set a minimum frontage and lot sizing. In the table creation tools for parcels, you can bring in the parcel name, area, perimeter, and all of the line segments. Is there anyway to include only the frontage versus all of the line segments?
View 3 Replies View RelatedAutoCAD Civil 3D :: Profile Creating Tools (Splines )
Oct 4, 2013I try to create my Vertical Profile using "Convert using AutoCAD line and spline" but spline option is not working.
I recreated as spline>cv>Degree (2) quadratic. The Civil3D is not accepting.
I'm doing something wrong? Use another procedure?
AutoCAD Civil 3D :: Plan And Profile Layout
Apr 30, 2012Is there any chance to fit plan and profile on one 11x17 layout without exploding and export to dwg? I can't do it because of annotation scale that change every time.
View 4 Replies View RelatedAutoCAD Civil 3D :: Profile Layout Labeling
Mar 6, 2012When I draw in the profile layout I'm getting odd results when the labeling is placed. See attachment. I have been looking through the styles trying to find what is wrong.
View 9 Replies View RelatedAutoCAD Civil 3D :: Substitute For Alignment & Profile Definition Tools?
Jun 18, 2013I think the icons are difficult to use at the time of deal with a complex desing.
I'd like to have a more intuitive tool for both scenarios (alignment & profile)
Civil 3D (2013)
AutoCAD Civil 3D :: Plan And Profile Sheet Layout?
Apr 9, 2013When creating plan and profile sheets is it possible to create the plan view with the alignment moved down to show more of project above the alignment? The default setting puts the alignment at the center of the plan view window.
View 2 Replies View RelatedAutoCAD Civil 3D :: Create Profile Layout From Feature Line
Oct 4, 2012I want to create a profile layout by feature line. Is it possible?I have a pipe about 3 miles long, an alignment along the pipe, and a provie view showing the exisitng surface and pipe network. The pipe network was created from a feature line. I projected the feature line to the profile.
This is why I want to do this: I need to label the horizontal and vertical angle points of the pipe in plan view. I crated a style that shows the station and elevation. I want the elevation to reference the profile. But it only gives me the elevation of the surface and I need the top of pipe elevation.
I tried crate profile by layout and traced over the top of the pipe in profile but its 3 miles and it will take a long time. How to get what I want done faster?
AutoCAD Civil 3D :: Layout Profile Offset And Dynamic Values?
Aug 12, 2013I have seen "offset" and "update mode" for a layput profile.
Civil 3D (2013) how much you have to improve....
AutoCAD Civil 3D :: Change Profile Type That Has File Assigned To It To Layout?
Jul 15, 2013Is there any way to change a Profile Type that has "File" assigned to it to"Layout"?
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
AutoCAD Civil 3D :: Creating Layout Tabs For Plan And Profile Sheets
Dec 18, 2013I am running civil 3D 2014 and have several lisp file that I have added to my startup suite. I am creating layout tabs for plan and profile sheets and use my lisps continuously and then all of the sudden it tell me that it's an "unknown command". I have closed the program and reopened the drawing an I realized that my start up suite is now empty.
View 2 Replies View RelatedAutoCAD Civil 3D :: Create Sheet Drawing That Has Two Plan Or Profile Views On Same Layout?
May 27, 2013I would like to create a sheet drawing that has two plan views or two profile views on the same layout?
View 2 Replies View RelatedAutoCAD Civil 3D :: Targeting Offset Alignment Layout Profile With Corridor Lane Assembly
Jul 19, 2012For some reason I cant seem to target an offset alignment layout profile with my corridor lane assembly. I can target the existing the existing groundprofile with the same offset alignment, but the layout profile when targetted does not change the lane in my cross sections. I can do this with civil 3d 2010, but not 2012. I have tried other lane sub-assemblies and it doesn't make a difference.
View 9 Replies View RelatedAutoCAD Map 3D :: GeoTIF Grayed Out In Layout
Jan 13, 2013I downloaded some GeoTIFs from Nationmap.gov. I attched them using FDO and when I view them in a layout tab, they are all greyed back and almost looks inversed but not quite. How to adjust the images so it looks correct?
I'm using Civil 3D 2013 SP1.I just tried it again with the MAPIINSERT command and I'm getting something similar.
Photoshop :: 3D Tools Are Still Grayed Out
May 26, 2013I am experiencing a problem with the 3D tools on CS6 Extended. I have checked and my vRAM is 512mb which seemed to be the biggest source of this problem for other people, but my 3D tools are still greyed out. I have converted the working file from CYMK to RGB and the 3D tools have become available.
View 1 Replies View RelatedPhotoshop :: Mask Button Grayed Out When Pen Tools Selected?
Jun 10, 2012how to use the Pen tool.
The tut shows that I should be able to click the Mask button in order to create a trans BG. However, mine is grayed out. I cannot find a reason why that would be. I am able to use the Layer Mask under other circumstances.
(The tut has me take an image, draw around the image to practice pulling/dragging, twisting, adding handles etc & so forth).
I have the pen tool set to Path but the Mask doesn't become available under any of the options.
The tut says to click Ctrl + Click on the path and then to click the Mask button.
why the Mask is grayed out?
AutoCAD Map 3D :: Turn Off Layout Tools Contextual Tab
Apr 23, 2013How do I disable the layout Tools Contextual tab in Autocad map 2013 so that is does not become active every time I change to Paper Space. I would like the ribbon to stay focused on the HOME tab when in paper space.
View 5 Replies View RelatedAutoCad :: Layout Tabs Productivity Tools?
May 29, 2012I am looking for tools be it tips and tricks or lisp that can make the most of layout tabs especially when I have many layout tabs in my dwg.
View 1 Replies View RelatedCorel PHOTO-PAINT X5 :: Effects Tools Grayed Out After Factory Reset?
Jan 22, 2012Effects Tools grayed out after factory reset- what do I do to restore function? :-/
View 5 Replies View RelatedPhotoshop Elements :: Layout Tab - All Floating Option Remains Grayed Out
Feb 12, 2013In expert mode under the Layaout Tab at the bottom of the screen I can see seven options for layoutas of up to four pictures - all work except the "all floating" option which remins greyed out - what do I do to bring it into use - it is probably the most useful option !
View 2 Replies View RelatedAutoCAD Civil 3D :: Profile Geometry Points Of Superimposed Profile To Alignment Label
Mar 1, 2013I have an alignment label that I normally use to show the PVI's of a profile in the plan view.
This is a little unusual, but in a specific case I wanted to design my profile at one alignment, but show it at another. I designed my swale profile in the pathway profile view and then superimposed the swale profile on the swale profile view. I then went back to the swale alignment to add these labels.
It's a no-go AFAICT. The only profile available for me to select for these labels is the original ground profile from the surface.
AutoCAD Civil 3D :: How To Base Structure Profile Label Location On Top Of Profile View
Nov 4, 2013I'm working with a structure profile label style and it seems like the only way to anchor the position of the label is based on offsets from the structure itself... Any way to position the label based on the top of the profile view, so that I could make all of my labels horizontally aligned above the profile view?
View 9 Replies View RelatedAutoCAD Civil 3D :: Creating Profile Bandsets With More Than 2 Profile / Surface Elevations Shown
Mar 14, 2013Im creating a Profile Bandset and would like to have multiple surface/profile elevations shown, ie: EG, FG, Back of Curb and Back of walk. While creating this bandset I see that the text component editor properties only has code for profile 1 elevation and profile 2 elevation in the properties area, which the code for this looks like below.
<[Profile1 Elevation(Uft|P2|RN|Sn|OF|AP)]>
<[Profile2 Elevation(Uft|P3|RN|AP|Sn|OF)]>
Ive tried to write my own code using the profile 2 as an example but it doesnt seem to work as a 3rd surface/profile and only seems to mimic the profile 2 elevation when placed in the band
My questions are as follows
1) does Civil 3d only allow 2 surface elevations in any band set? if it does allow more profiles/surface elevations what am i missing to create it?
2) if Civil 3d does alow for multiple surfaces to be shown in the band set how do i get the text component editor to supply the extra profile elevation codes? or would i need to create from scratch
3) if i need to write the code from scratch does any listing of the codes and meanings of each code ie what does RN, Uft, Sn and so forth do and mean .
AutoCAD Civil 3D :: Editing Profile Style Of Single Profile Instead All Of Profiles?
Mar 5, 2012I have a group of profiles in a drawing and I want to change how one of the profiles is displayed through the profile view style manager, but I do not want to change how all of the profiles look. Is there a way to change the way a single profile looks without changing all of them?
View 2 Replies View RelatedAutoCAD Civil 3D :: Proposed Profile And Existing Surface Not Showing In Profile
Jun 17, 2013I have a profile showing proposed storm sewer, existing sanitary, rock surface, existing surface, and proposed profile. Today for some reason the proposed profile and labels, and the existing surface are not showing on the profile and I'm not sure what has changed or how to get them back.
View 3 Replies View Related