Each time I open a second or third file in CorelDraw x5, the windows seem to lose the top MIN, Max Close icons. You know the ones that sit at the top right of each window. Because of this I'm unable to close or edit the work. In fact NOTHING works. I'm running Windows 7 64 bit with a TON of memory.
View 3 RepliesThe minimize, restore down, & close icons keep disappearing from the upper right hand corner on my current drawing file in 2013 LT. They will reappear once I re-zoom the drawing. Is there any way to keep these icons on the screen at all times?
View 2 Replies View RelatedI can't seem to close/minimize/maximize my windows in PS.
View 2 Replies View RelatedHave been using Xara products for years and currently on Photo and Graphic Designer V7.
Normally, I have the three windows icons in the top right (minimise, maximise and close) and these normally operate on the whole of the Xara window. (If I minimise, then Xara minimises to the task bar and I see my desktop etc.)
However, today, if I click on minimise, then the drawing (within Xara) minimises, and I'm left with the Xara window but no buttons to minimise, maximise or close the whole window .... it's just there and the only way I can see behind it is to drag the sides in or use FILE / EXIT to close the program.
When I first installed Photoshop CS6 Extended on my Mac it had a bar running along the top that had the program name in it (Photoshop) with the red, orange and green, close, minimize and maximize buttons in it.
Somehow I have turned this off and the three buttons no longer show. Below is an example picture of the bar I'm wanting to turn on: I have the application frame turned on and they still do not show.
Been using PSP since X2 and never had any real problems, but I recently purchased and installed x6. It started giving me a problem I couldn't live with so I uninstalled and then reinstalled PSPX6 Ultimate. That didn't fix the problem tho.
My problem: when I click on minimize, maximize or close, nothing happens. Repeated clicks of maximize has more than once even closed the program altogether.
As I mentioned, re-installation did not fix it, although the first time I clicked maximize after re-installation it did work. Then it quit.
I almost always work with multiple drawings in the same Autocad window. Often (maybe 2/3rds of the time?) when I have one drawing maximized inside the Autocad window, the minimize-downsize-close buttons disappear from that drawing's window. The only way to get them back is to cascade the windows.
View 3 Replies View RelatedAm running the system as above and can't ever see the minimize/maximize/close buttons normally in Win 7's title bar.This means I have to keep quitting the program if I want to do anything else.Am I doing something wrong here or is this a bug of this particular implementation?
View 4 Replies View RelatedI have Lightroom installed on two Windows 7, 64bit systems. On one the top line above the File, Edit, Library... line is the expected; Lightroom 3 Catalog... at the left end and the three boxes on the right (minimize, maximize and Close). On my other system that line is missing. How to get it back?
View 2 Replies View RelatedHow to restore bar at top showing minimize maximize close options?
View 2 Replies View RelatedI'm using autocad 2013 & the classic workspace instead of ribbon. For some strange reason, if 2 or more drawings are open & I minimize a drawing, it removes the minimize, maximize, close buttons from the right top side of the screen like in the attached picture. To get them back I have to go to the window pulldown & select the drawing from there. I'm using windows 7 pro with a nvidia quadro 1000m card.
View 2 Replies View RelatedI'm running Win 7 on an 64 bit OS machine. LR 4 doesn't display the App control buttons in the upper right hand corner controlling CLOSE, REDUCE and MINMIZE the App. Clickingblindly in their location does nothing either. I can find no way to get them to be functional.
View 1 Replies View RelatedThe minimize / maximize / close menu bar has disappeared and though trying nearly everything I can think of it has not re-appeared. I am using CS6 on a MacPro.
View 4 Replies View Related1. had this problem for sometime. running windows 7. When i minimize my autocad window from maximise to the taskbar, for some reason when i click it on the taskbar to bring it back up, it has shrunk to its restore down size instead of the maximised window it was. This problem seems to only occur on win7. I don't have my windows aero themes off as i know of those problems, whats causing this one?!
2. whats also annoying in windows 7 is that i choose not to have my taskbar buttons combined, i am only in one session of autocad yet each drawing has its own taskbar button, is this normal?!
Is there a way to easily and quickly extract all commands listed as well as the icons? I hate pressing F8 at startup!
View 1 Replies View RelatedAfter upgrading to 5.3 I don't have minimize, resize or exit icons at top right of screen.
View 4 Replies View RelatedI am forced to browse my block attributes page by page. Is there any possibility to tweak the window size and have it maximized?
View 3 Replies View RelatedI am having troubles with printing my work in Photoshop. The problems is that the printing window is to large for my 10" screen, which means that I cannot see the whole window and the printing button. How can I make it smaller, so I can print?
View 1 Replies View RelatedI cannot find a minimize icon on the program window. So that I can get to my desktop and or other programs maybe running in the background.
View 5 Replies View Relatedim working on a PC , with windows 7, with photoshop CS5 i searched everywhere for answer , but none was given.. people did mention this problem, but for different photoshop versions , and, i had it good till i dont know what happened and changed it, so i believe it is fixable but people understood it wrong.
anyhow, the problem is, when you try to maximize the image window (assuming you changed it from tabs), the window maximize all over the screen, over the tools and title bar.
instead of staying inside the workspace.as i mentioned, it used to be like it , but something happened and now its all over the thing.i tried double click the hand tool, all sort of things with the "F" and Tab shortcuts, the arrange documents thing on the top, even trying to restore default setting but nothing really did the trick.
i tried to look for something called "Application frame", that somehow suppose to do just that, under window->Application frame, but its not there. again, it used to be ok so i know there is still hope..
here it is restored, under "fit screen" option, notice it only get the hight right, i would not call it "fit screen" but what ever..
red circels show the title bar and tools..
and this is when i hit the maximize button and unleash hell, red circles are where the title bar and tools were, not so nice and cool..
i noticed none of the others gave pictures, so i gave it a go..there are no words to describe how annoying it is.
I used to be able to maximize a display window and then make the image fit the window and finally shrink the window to fit the image. This seems to have changed recently. What are the equivalent keystrokes to accomplish fitting the image to the window and then shrinking the window to the image?
View 1 Replies View RelatedHow do I minimize one picture, in order to view two pictures is the same screen?
More details...In my previous version of PSP, when working on a photo, the tab at the top for the photo had the following options: Minimize ( _ ), Maximize ( [ ] ) and Close ( X ), similar to the options found in the upper right corner of most windows.
However, in X5, the picture window/photo tab only has the Close ( X ) option and no Minimize ( _ ) or Maximize ( X ) option.What am I missing or am I just daft?
I found being able to minimize multiple photos in the same window useful when pasting/cloming one image over another.Or, if I have multiple, yet very similar images, determining which is best without having to tab back and forth.
My Vista system has developed a few bugs which are not cured by Norton 360.Dragging a window causes it to maximize in a few programs PASTE does not work in some programs -- including X4 . The CROP tool stopped working in X4 but is OK in X5 High-lighting is erratic in WORD etc.
I can only run a "clean" install from my OEM disk which means reloading all applications.I was wondering if I should give up and install Windows 7.
What has been your experience with Windows 7/Did you do a "clean" install or just the update.
Photoshop cs5.1. I don't like double click title bar to minimize the window. I don't use it, I don't need it. Isn't there a way to disable it!?
I'm unsing Snow Leopard, but I do have "double-click a windows title bar to minimize" disabled in system preferences > appearance. So photoshop overrides those settings? Maybe I'm missing something?
I have a customize form to use in AutoCAD. If I minimize the form, I can not see it anymore in the AutoCAD application tray. I want to minimize my form and later restore it after editing in .dwg file.
How can I do that?
Windows 7 SP 1 64bit German, LR 3.6 64bit German
Change to the grid view and resize the LR window by double-clicking the frame title - the window will be resized but the grid view is not updated -
maximing the windows --> blank area to the right of the thumbnails (the images in the grid view)press tab two times to if fix the problemrestore the window--> some thumbnails are only half visible or not visisble at all because there is no horizontal scrollbar and the thumbnails have not been wrappedpress tab two times to if fix the problem
I think I did not have this issue with LR 3.5 - or same problem with LR 3.6?
When I double-click an AI-file to open it, Illustrator resize/minimize it's own window. Sometime so much that Illustrator itself reply with the error: "Can't open the Illustration. There is not enough room for the window; Increase document area and try again."
If I open a file (browse for it) from within Illustrator it works fine and Illustrator keeps whatever windows-size I have chosen.
Windows 7 Professional (64 bit)
Adobe Illustrator CC 17.1.0 (64 bit)
I somehow managed to delete the editing menu on the right hand side of my screen. how can I recall this menu?
View 1 Replies View RelatedI'm on CS6 on a year old iMac. Plenty of RAM and memory. For some reason all of a sudden, the tools on the left hand side of the screen won't work. All I get is the hand. What I hit or what happened. I've re-started PS, the computer and reset Bridge. How to reverse what happened?
View 2 Replies View RelatedMy lr4 doesn't have a folders panel on the left hand side. Is the software defective or is it hidden?I just lost all my images!
View 3 Replies View RelatedI recently upgraded from ps elements 10 to 12 and have noticed that all of my albums from 10 have disappeared, but to the lower right of each photo thumbnail there is a red album icon, and if I hang my mouse over it, it tells me what album it is in, but the album isn't listed on the left of the screen. I really do not want to recreate these albums, as it would be almost impossible. I am dealing with over 2000 photos over several years (downloaded from discs from the last several years). I need to have these albums back to print, delete, edit, share.
View 6 Replies View Related