AutoCAD Civil 3D :: How To Label All Lines In One Go (window Selection)
Mar 23, 2012
How to label all lines in one go (window selection)?
Is there a way to label all the lines in one go by using the “window selection”? why the current behaviour of the selection requires to select the lines one by one?
How to remove the (‘) that appears at the end of each label? Is there an icon for the “add lables” command on the ribbon? Why the command “_AeccLblDlgGeneralNote” is not defined on the command line?
I need to make a map of a subdivision with all lot dimensions. I see how we can label all the lines of a lot by picking the parcel label, but it only allows one at a time.
As far as I know there is no way to add or remove vertices on contour label lines. Is this correct?
If so it's another one for my wish list. Neil Wilson (a.k.a. neilw) Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1 WIN 7 64 PRO HP Pavillion h8xt, i7 2600, 12 GB RADEON 6450, 1 GB [URL]....
The label associated to a grading point when is moved when is moved changes its size automatically and a leader appears. After this happen no control over the grading point and its associate label. refer to the image below.
C3D 2013. We have profile line labels, some of which get manually edited (for example, change the "<[Tangent grade(FP|P2|RN|AP|GC|UN|SD|OF)]>" to a static number such as 0.29%).
However, if you CTRL+Click and select one of these labels and change the style of that one label, then the manual edits are lost and the label reverts back to the default string.
I have a flexible sub-assembly in my top assembly. Sometiems I'm trying to demonstrate to others how a mechanism in the sub-assembly works using this flexibility feature. It works great, but when I move just one little part of a flexible assembly, Inventor displays the wire-mesh of the entire flexible assembly, because technically the entire assembly is selected, even though I'm only moving one part. It clutters up the screen very badly, detracting from what I'm trying to show.
Is there a way to prevent Inventor from displaying the selection lines? Either only when I'm moving a part in a flexible assembly (which would be great), or to just turn them off completely when I'm presenting like this? I know I can turn off pre-select, but that doesn't work, because once I start moving a part in the flexible assembly, the assembly is "selected" and the wire-mesh displays.
I'm trying to label my Profile label stations as raw stations, 20~20 meters, and I'm not being able to adapt the format to STATION 0, STATION 2, without any plus zeros or +, or -, or commas, or anything, as following in the image.
Is it possible to pin a label to another label ? Or pin a label to an object so that when the first label (or object) is moved, the other moves with it ?
when I use the selection with the mouse, I can clearly see in model space the borders of the window I create. But when I switch to Layouts, it's invisible. I can still use it, but it's annoying not seeing the window selection. I've tried with OPTIONS-SELECTION and DISPLAY tabs to adjust it and it didn't work.
By default when we left click in AutoCAD and move the mouse, a selection window appears. Something went wrong in my system and now if I left click no selection window is appearing. For selection window to appear I have to drag the mouse instead of just moving it (which is the normal behavior).
My boss wants everything plotted with lines merge, however, all of my parcel labels will not plot with the text masked. The mask plots fine when it is set to lines overwrite.
The “window selection” selects only what appears on the screen! I wanted to select a page number located on the lower left corner of each title block of each drawing but found out that the “window selection” doesn’t keep selecting what doesn’t appear on the screen (if zoom in is applied)! For example, if I select a number of drawings and “zoom in” is applied then the window selection will only keep selecting what appears only on the screen!
Then how to let the “window selection” keep selecting all the objects regarding whether they appear on the screen or not?
I downloaded a lisp routine that will align block attributes. The problem is I can only select the attributes one at a time. I'd like to be able select multiple attributes using the selection window or a crossing window, but I haven't had much luck. If you use the AEATTSHOW command, it give you a prompt to "select using window" by pressing W. I'd like to have the same functionality for my Align attributes routine.
Below is the portion of code I currently have to select attributes one at a time:
;* Select all attributes to align with the parent selected above and add the attribute entname and the block ;* entname to a list in format ( (AttrEntName BlkEntName) (AttrEntName BlkEntName) (AttrEntName BlkEntName) ) ;* while (/= TempAttr nil) (setq TempAttr (nentsel " Select Attributes to align: ")
If I have a series of lines on a layer, is it possible for a macro to place a label for the lengths of the lines at the center of each line in AutoCAD LT 2012? Adding a DIMLINEAR to each line is for the birds....my drawings have as many as 250-300 lines that need to be labeled with thier lengths.......
When you select similar using autocad it select similar in entire drawing. What i want is i am able to select similar using the same setting of selecting similar but with window selection instead of entire drawing ?
Problem with command from Home tab - Draw panel - Curves drop-down - Create Curves Between Two Lines OR Create Curve on Two Lines.
If you select the Degree option, it draws a zero length curve when you type in a valid number for degree of curve. I have tried entering it in decimal format and as ##d##'. NOTHING WORKS!
Brush tip shape section on the brush panel shows the brush tips for the selected set of the brush presets ... at the end of the list there are some brush tips (they are changing with the selected set) and they are not included in the selected set of brush presets. Where are those additional brush tips are coming from?
For example ... for calligraphic brushes, at the top I can see the tips for the set of calligraphic brushes in the window ... but, there are some other brush tips there at the bottom (red lined). Where are they coming from?
The newest version of Gimp no longer maintains the marching ants for the selection window when you select an image that is on a transparent layer (my observation). It seems to only select the (smaller) image(s) that are contained therein; the selection is restricted to the outline of the image only. I am trying to maintain proper spacing etc. and the marching ants selection window was wonderful for that.
In Shop shop 6, I can bring up Editor with more than one photo file, click on Windows and then cascade to make a colage of photos. When I try this in Photoshop 10 cascade is not available under Window even though it is there. How do I make it availabe in Photoshop 10?
My edit named selection sets window will not open. The button will not work nor the shortcut under EDIT, i have restarted, i have competely uninstalled max and i have updated with FBX plugins from autodesk. I use this command A LOT and it will not open.
is there a way, that objects only inside the selection window or lassoed region get selected rather than objects getting selected which are partially inside the selection window?
Is there a way to make the pop-up window that comes up when you delete a photo have "delete from disk" be the standard option highlighted in blue instead of "Remove"?
Or a way to use the keyboard to move the selected option? I know about the keyboard shortcut, Alt Ctrl Shift Delete, just wondering if there is a way to mess with the pop-up window selection. I have LR4 on a mac.
