By default when we left click in AutoCAD and move the mouse, a selection window appears. Something went wrong in my system and now if I left click no selection window is appearing. For selection window to appear I have to drag the mouse instead of just moving it (which is the normal behavior).
View 3 Replies
I still want it to have its normal behavior while in a command, but when not in a command it still enters the selection mode, which does not work, but if it would enter a zoom window command, it might be a more useful command.
View 5 Replies View RelatedI just bought Photoshop CS6 and it seems that it isn't working properly. I run Windows 7. The left click and left alt are not working. The buttons work perfectly on other programs.
View 1 Replies View RelatedI use cs2 and when in photoshop when i left click on any of the tools for instance the pen tool it brings up the menu to select pen tool, freeform pen tool, etc.. rather than just selecting it. I am use to having to right click on the the pen tool to get that menu, i was wondering how i would change it back. Same thing happens when i left click on all the tools on the tools menu, just used the pen tool as an example.
View 5 Replies View RelatedI was working on max using the hair a fur modifery to try and test out something when I noticed somethign strange. When I right clicked in the view port to bring up the options (exsample cut, convert to polygon, hide, fezze ect.) it wouldn't come up. Hears what I've tried. Reinstal max, get a copy of the default interface from a school computer and tried loading that, turning off windows 7 's background color transparancy, removing all things installed right before the problem, run a system check for errors, a viruse scan and right now I'm trying a full restore from a back up. I don't know what's going on. I suspected that my graphic's card drive might be the caulprate but I checked that as well and it says that its all clear. I took the files that had the problem to other computers and they had no issue. It doesn't matter what file I load either this is universal. I can start with a blank file and the right click view port menue won't come up.
Detailed discription:
Launch 3ds max. Go to any view port upon launch. Right click in view port and no menue comes up.
Version:
student 2012
OS:
Windows 7 64 bit
Ram:
8 gigs
Graphics card:
Radeon
Since installing 14.1, flyout items in drop down menus have started appearing to the left of the drop down menu not the right. Grateful to know how to fix this.
View 2 Replies View RelatedHad problems with left click text edit function not working?
I am using AutoCAD 2011 and I have been always used the Left click double click to edit text and now its not working. Is there a setting I'm not aware of that I can change.
Since we updated to CC, I have a very good chance of this not working evey time I try it. Maybe 10% of the time, it will select the word/line as it should. My prefs are identical for this feature as they have for the past several version of InDesign. My partner also has trouble with copy/paste in InDesign and Illustrator as well.
View 20 Replies View RelatedFor some reason when I open a drawing and try to edit it, the left mouse button cancels the command.
Example;
Command: line
Specify first point:
Specify next point or [Undo]: *Cancel*
Command: *Cancel*
All my layers are turned on, when in an existing drawing my schedules do not appear when I use the tool to create them. When I open a new drawing draw a wall and a couple doors, the schedule inserts when I use the annotate tool. I am only using a basic floor plan at the moment, no xrefs or anything else, simple walls and doors and inserted from the program. I did use tags for the doors and windows which worked fine.
View 4 Replies View RelatedIs there a way to create a shortcut for mouse left-click button on the keyboard?
View 8 Replies View RelatedI want to be able to read the left click mouse button coordination all the times . Is it possible ?
View 4 Replies View RelatedCan not click on multiple objects or lines for erase,trim or extend commands. Is there a mode that I have turned on by accident , driver warning also comes up in trim offset command.
View 6 Replies View RelatedI have Photoshop CS5 on a Mac OS 10.7.4 My problem is that when I am using curves or a slider, my selection does not stay in the same place. For example, I chose the number 8 on a slider, after I release my selection it will either go one number after or before my selected number. I have had this problem since I got my computer, December 2011, but it has only recently started to frustrated me because of having to use Photoshop a little more than I usually do.
View 2 Replies View Relatedi have problem with 3Ds Max 2012. When I go to click on one of my mesh and select and left click the pannel that is soposed to pop up doesnt. I dont know if I locked it some how or if there is a bug.
View 9 Replies View RelatedI have a tablet and I am trying to change brush size and hardness with the pen but I keep creating new layers. Is there a way to turn this off because I would like it to flow better. With the mouse if I ctrl+alt +left mouse is gives me a new copy of my layer. With the pen I get the pressure/size to come up but it is fickle and mostly just resorts to creating a new layer copy which is what I want to disable so it just does the brush size/hardness option. It seems the left mouse click doesn't display in any keyboard shortcuts.
View 1 Replies View RelatedI'm friends with an individual with disabilities, and it is difficult for him to hold down the left click and move the mouse (in his case, a joystick) at the same time. I was curious if there is a way so that when he presses left click, the brush will continue to "stroke" until he presses left click again.
If not, any software that could accomplish this task?
When holding down the left mouse button in the scroll bar area for just a fraction of a second too long, the scroll bar moves several positions. In the past, it wasn't this touchy. It's so touchy that it's impossible to CONSISTENTLY click once and make the scroll thingy move just one position. In previous versions, it works like a charm. Is there a way to adjust this mouse issue?
I use it on every image for cloning so that I can check one section at a time. For this reason, I've now gone back to CS5, but also because CS6 crashes on me and it sometimes gets stuck on Auto Saving files (possibly because they're big).
I lost the text window that is normally docked on the bottom of the AC screen. I searched and found that F2 brings it up, but I can't find how to have it permanently docked in the bottom left hand corner, where it normally resides. I'm using AutoCad 2002.
View 5 Replies View RelatedI know this problem is really simple, but I just can't seem to get it to work. I should be able to left-click on a layer, hold in the shift key while left-clicking on a layer further down the list to select multiple layers. It doesn't work, I can't even get the (Alt-Left Click) command to work, allowing me to select individual layers.
Both these commands work in Image Ready and Flash just fine.
I have checked the keyboard settings, but I am not really sure what to look for - nothing seems out of the ordinary.
I've been using PS and PSE since 2003 so I'm not what you'd call a new PSE user. I upgraded to PSE9 a few years ago but now I can't get the clone stamp to work correctly. I keep getting black spots on the distracting elements that I want to remove. I've gone through Scott Kelby's PSE9 book a million times but still can't get the tool to work correctly.All I get are the black spots. I'm working on photo submissions and time is running out. Here's what I'm doing.
1) First I select the Clone Stamp tool and then the brush size I want to use (usually around size 45)
2) Then, I sample the area just to the left of the distracting element that I want to remove. (I use Alt + left click)
3) Then I run the tool over the distracting element and left click. But instead of getting my sampled area clone, I get a black spot.
I thought that maybe I was using too big of a brush but that's not the case. So, what the heck am I doing wrong or is there some kind of an update or tool that will allow me to remove distracting elements more easily?
So for some reason when I open maya and try to open a file or create reference the window doesn't pop up and I can't click anything else whenever I try I hear a ding sound. I've tried uninstalling and reinstalling.
View 2 Replies View RelatedI am using CorelDraw 12, and recently when I try to drag a drawing, I do a left click and drag. But in doing so, depending on how far I move the object, and how long I hold the left click down, it will just continue making duplicate copies of my object. So as I drag the object, it is also copying. I have had to restart my computer to get it to stop, but this is getting old.
how to disable the drag copyiing? Everywhere I have looked, I find that people are right-clicking, so to clarify, this is a left click issue with my mouse.
I s there an efficient way of stretching an object. Usually I drag my mouse from right to left, thereby selecting objects that my selection box just touches. I want to drag my mouse from left to right so that only the vertices which are inside my selection box get selected.
View 9 Replies View RelatedAll of a sudden the information to the image started appearing on top left of image. It is disturbing when I'm trying to edit image. How do I get rid of this image information on that part of the screen?
View 2 Replies View RelatedI have just installed Elements 12. I went to open some jpeg images. They appear in the Photo Bin but can't be made to appear in the main window. The Layer Panel shows the background copy of the images.
View 3 Replies View RelatedWhat is difference between Text Tool used for paragraph text with pressing left click mouse in x5 and inserting placeholder text in x6.
View 1 Replies View RelatedThe Layers, Channels, Paths Dialog Window doesn't appear on my screen.
View 1 Replies View RelatedThis morning, my Selection Tool (the filled-in arrow) is acting like a Direct Selection Tool (the hollow arrow), but only when I click and drag on a group. It ends up select the anchors within the group rather than the whole group itself.
I've checked my preferences, quit and relaunched Illustrator a few times, and nothing seems to fix it. The problem briefly went away a few minutes ago, but came back when I quit and relaunched for good measure.
It's happening in Illustrator CS 5.1. I have CS6, and that version works fine, but I'm waiting on some plugins to be updated for it, so I'd like to use CS 5.1. I'm also running the latest Suitcase Fusion 4.
Downloaded Gimp 2.8.6 the other day, when loading it up for the first time, there where no left toolbar and photo window. Tried to find it but nothing.
[URL] .....
MAC OSX 10.8.3
When I select an image to paste in another image I am now only getting 1/4 of the image appearing as the paste selection.
View 2 Replies View Related
