All of a sudden the information to the image started appearing on top left of image. It is disturbing when I'm trying to edit image. How do I get rid of this image information on that part of the screen?
View 2 Replies
O/S Mac OS 10.7.4 Lightroom 4.1 Photoshop CS6
When sending a raw image from lightroom to photoshop all I see is a blank photoshop window. If opening direct in photoshop it goes to camera raw first. I have just updated to the latest camera raw.
I bought a Canon S100 specifically for its GPs and movie capability. On a recent vacation, I used the S100 and a Nikon D300. In cases where images were taken with both cameras in approximately the same place, I would like to copy the GPS information from the S100 CR2 files to the D300 NEF files.
View 7 Replies View RelatedI have images for which clients have made comments on what they want done to them. I don't find a right place to place that informatiomn in Lightroom and something tells me there should be such a place.
For instance, I have one image that the client wants a specific background replaced.
If I delete an image from my library it is not appearing in 'Trash'. I am pretty sure it used to, and this may be since the upgrade to LR4.1, but I am not sure. I am on an iMac with Lion.
View 1 Replies View RelatedLightroom 4.3, Win 7 64 bit
I am trying to edit an Adjustment Brush in the Develop module.
I want to fine tune the coverage area for the brush.
I can use Ctrl +/- keys to zoom in/out, and the Page Up/Down keys to scroll up and down when zoomed in, but there does not seem to be any way to scroll right and left when zoomed in. The key shortcut lists I've seen don't list anything for scroll left and right. How to scroll the image left and right when zoomed in ?
In LR 4, a small dark circle is appearing in the right upper corner of an image; hovering over it does not bring up an explanation and when tapping on it, it turns white?
View 7 Replies View RelatedHow do I remove the white img. number on the top left corner of my images?
View 1 Replies View RelatedI am using Lightroom 4.4 and an Epson 3880 with printer driver ver. 6.6. I want to print a 16 x 20 image on 17 x 22 paper. I select a paper size of 17 x 22, and in the Lightroom print module, I set the margins to zero, and the cell size to height=16 and width=20. I turn on the ruler guide, and it shows that I will get a 16x20 image on the paper. However, when I print it, the image is about 3/8" larger than that in both dimensions.
View 5 Replies View RelatedWhen I move a selection of image files from one folder to another within lightroom there is always an error with at least one image and it doesn't make the move and is left. I can then reselect this image and then move it again.
View 3 Replies View RelatedFor example, I want to print one 17x22-inch image onto 2, 8.5x11-inch sheets.
View 2 Replies View RelatedWhen I open Bridge on my laptop I find that instead of images from the DNG files appearing, what I get are small icons having DNG and a camera iris. This happened after I reinstalled the CS6 program. (I managed to lose the icuuc40.dll file and received a message advising to reinstall the program).
I use my laptop when travelling. I download all files from the camera onto it and view them in Bridge. After returning home I transfer the files to the PC desktop for processing etc.. Bridge is working normally on the desktop.
I have both Photoshop CS6 and CS4 and they both are not opening the image. when I open RAW format files, they open up okay IN Camera Raw but when I am done in there and open them in PS the file displays for a millisecond on the canvass and then a black screen of hate pops up. I tried unistalling PS CS6 and that didn't work. I also tried reinstalling my newest AMD driver for my Radoen 6870 2G card but that didn't work. I then proceeded to update to Win7-Service Pack 1 update and that didn't do anything either.
JPEGS also do not display in PS as well. I am not sure but I think I might have to downgrade my disply driver to get this to work. My system specs are displayed below.
SYSTEM SPECSWindows 7 Ultimate Edition (64-bit) Service Pack 1 (Build 7601)
9.0.8112.16421
8192 MB
AMD Phenom(tm) II X4 940 Processor
2995.6 MHz
Speakers (Realtek High Definiti |
Speakers (TASCAM US-122 MKII) |
Realtek Digital Output(Optical) |
Realtek HD Audio 2nd output (Re |
[code]....
Since installing 14.1, flyout items in drop down menus have started appearing to the left of the drop down menu not the right. Grateful to know how to fix this.
View 2 Replies View RelatedBy default when we left click in AutoCAD and move the mouse, a selection window appears. Something went wrong in my system and now if I left click no selection window is appearing. For selection window to appear I have to drag the mouse instead of just moving it (which is the normal behavior).
View 3 Replies View RelatedThis just started happening and I don't know if I inadvertently have changed a setting. I open a file in Photoshop and the file is obviously open because I can see it in the history or layers panel. However it does not appear on the screen. I've tried changing my viewing and other things, and it just isn't there.
My only solution is to shut Photoshop down completely, reopen Photoshop and reopen the file. Very inconvenient.
when i open a photo and begin work on it in photoshop CS5, a negative image appears over the photo and moves with my cursor----that means i can't use the tools.
View 5 Replies View RelatedAs you will see from my image, when I use Free Transform in Photoshop CS5 black lines appear around the outside of my image. I am using an image (of the people) with a black mask sitting on top of a main black background. They are the exact same colour black 000000
View 9 Replies View RelatedGot my max design 2012 but have a problem with horizontal banding appearing on certain bits of the image. see attachement.
Rendered the image fine in IRAY on max 2011 but now I moved to 2012 the same file creates these wierd lines.
Takes too long to clone it in Pshop and the results are not great.
It isn't running out of memory on the card.
AMD 1055, GTX 470, 8gig, win7
If I take an image, and using the path tool, draw an area, then do a selection from path, cut/copy and paste as 'new image' then save the new image as a .bmp, .jpg etc, I am getting the whole original image instead of the cut an pasted portion. The full image does not show up as long as the drawing remains in .xcf (the background is a grey checkerboard). When saved as .jpg or .bmp the checkerboard is replaced by the original source image that it was cut from. This is Gimp 2.6.11 under Linux.
I have checked for extra layers, tried removing alpha channels, doing a 'copy visible' and re-pasting, merging of all layers all to no avail. It doesn't always happen either so there must be something, some setting or clicky box somewhere.
When I select an image to paste in another image I am now only getting 1/4 of the image appearing as the paste selection.
View 2 Replies View RelatedI just got a fresh install of Illustrator CC and every time I place a raster image into my document, it appears dim or very light. When I go to export the image, the PNG file displays the image correctly.
View 6 Replies View RelatedI have an issue of a ghost image appearing in the composition background. I can't figure out how it got there or how to remove it. It's really annoyong as the image also appears in rendered videos.
This only seems to appear when my composition settings is set at 1024 x 576 px, which I must use for projects. If I increase the composition size by 1 pixel, the image disappears, change it back and it reappears.
note, that there is no files in my project and the image still appears.
I have just installed Elements 12. I went to open some jpeg images. They appear in the Photo Bin but can't be made to appear in the main window. The Layer Panel shows the background copy of the images.
View 3 Replies View RelatedI didn't see any way to view technical information about the currently open image. Is there such a dialog, and if not, can you add it to the next version ? Would really come in handy, especially if you can additionally add complete EXIF data viewing/editing support in the same properties dialog. If this latter bit is too much, even a basic dialog displaying the image properties would be very nice indeed.
View 10 Replies View RelatedI work with X3 at home and I wonder how I can do this. I have a image and What I try to achieve is that it fades out to white from the left to the rigth side. So on the left side the image is fully seen and on the right seen it turns into white.
View 2 Replies View RelatedI have an image on a web page, see imageA, but the image is originally chopped at the left (see original image B). I'd like the imageA to stretch most of the way across the white space. I've enlarged it and tried to crop, but it eliminates what I'd like to be shown, which is what appears in imageA.
View 10 Replies View RelatedWhen I try to plot the file from the layout the middle and right part of my xref'ed image comes out as a black box - the top, bottom and left edge are fine. As are the line-drawings from two other xref on top of the image. The problem accourse both when I try to a physical copy on our plotter and when I try to plot to a pdf.
I'm working in autoCAD 2013 for mac and the files I'm working on are located on a server.
when I am trying to use the lighting style scenes (such as old warehouse) I get this message "Cannot find the source Oldwarehouse of the image based lighting" and the background image does not appear I only get the same old gradient backgroud. (see attached file)
I know the IBL files exist and know where they are but I have moved the folders from the default location on my C: drive due to space reasons and changed the respective filepaths in the application options. However it seems inventor has not understood that the path to these IBL background files has changed... is there some filepath setting somewhere that I have missed?
I am using inventor 2013.
I have an image of a room, and I want to add the ability to click different parts to zoom in (by scaling up background image) and have the relevant information appear. I don't know if the best way is to have all the "camera zooms" and information on one timeline (have to manually animate everything dissapearing, fiddly), or to separate them into symbols and call them up?
View 3 Replies View RelatedOk so im working on a project
An animated email signature where an image of an arrow moves from the left to the right of the screen - easily done with a few frames and animation in gimp the arrow needs to move behind a paragraph of text which has the persons name, work address, email and phone numbers.
So the question remains is it possible to have one fixed frame (persons contact details) in a project of say 20 frames (which make the moving arrow behind the text)?? AND can
