This just started happening and I don't know if I inadvertently have changed a setting. I open a file in Photoshop and the file is obviously open because I can see it in the history or layers panel. However it does not appear on the screen. I've tried changing my viewing and other things, and it just isn't there.
My only solution is to shut Photoshop down completely, reopen Photoshop and reopen the file. Very inconvenient.
I am facing problem in my AutoCAD2013 (Ultimate version) -
1.While opening any file an alert message is appearing on the screen, for closing the same I Have to use ( X) close many times.
2 After opening the file every time I have to set the AUTOcad default setting once again, it is taking too much time,
I am not in a position to format my PC now, The snap shot is attached herewith.
I have my PS CS file browser preferences set to "High Quality Previews" and the previews look great--sharp and crisp! However, when I actually open up the image it doesn't seem as sharp--it's a little soft.
What is the "high quality preview" doing to make it look so sharp? Does anyone know what settings the preview is using?
I want my actual images to look as sharp as the previews! It seems like a major teaser that the preview looks BETTER than the opened image.
illustrator cs3 - every time i open a file it tells me to repair/replace an image.. when i do it ignores the fact i did and tells me to repair/replace the same image again. what shall i do? is that a windows 7 problem?
View 1 Replies View RelatedAll of a sudden the information to the image started appearing on top left of image. It is disturbing when I'm trying to edit image. How do I get rid of this image information on that part of the screen?
View 2 Replies View Relatedway of opening images in CS2 where after opening they will appear in the middle of the CS screen rather then in the top left corner?
I can drag and maximize so they appear in the middle, but on reopening another image they default to the top left again, I would like them to always open in the middle?
When I open Bridge on my laptop I find that instead of images from the DNG files appearing, what I get are small icons having DNG and a camera iris. This happened after I reinstalled the CS6 program. (I managed to lose the icuuc40.dll file and received a message advising to reinstall the program).
I use my laptop when travelling. I download all files from the camera onto it and view them in Bridge. After returning home I transfer the files to the PC desktop for processing etc.. Bridge is working normally on the desktop.
I have both Photoshop CS6 and CS4 and they both are not opening the image. when I open RAW format files, they open up okay IN Camera Raw but when I am done in there and open them in PS the file displays for a millisecond on the canvass and then a black screen of hate pops up. I tried unistalling PS CS6 and that didn't work. I also tried reinstalling my newest AMD driver for my Radoen 6870 2G card but that didn't work. I then proceeded to update to Win7-Service Pack 1 update and that didn't do anything either.
JPEGS also do not display in PS as well. I am not sure but I think I might have to downgrade my disply driver to get this to work. My system specs are displayed below.
SYSTEM SPECSWindows 7 Ultimate Edition (64-bit) Service Pack 1 (Build 7601)
9.0.8112.16421
8192 MB
AMD Phenom(tm) II X4 940 Processor
2995.6 MHz
Speakers (Realtek High Definiti |
Speakers (TASCAM US-122 MKII) |
Realtek Digital Output(Optical) |
Realtek HD Audio 2nd output (Re |
[code]....
O/S Mac OS 10.7.4 Lightroom 4.1 Photoshop CS6
When sending a raw image from lightroom to photoshop all I see is a blank photoshop window. If opening direct in photoshop it goes to camera raw first. I have just updated to the latest camera raw.
when i open a photo and begin work on it in photoshop CS5, a negative image appears over the photo and moves with my cursor----that means i can't use the tools.
View 5 Replies View RelatedAs you will see from my image, when I use Free Transform in Photoshop CS5 black lines appear around the outside of my image. I am using an image (of the people) with a black mask sitting on top of a main black background. They are the exact same colour black 000000
View 9 Replies View RelatedWhen I select an image to paste in another image I am now only getting 1/4 of the image appearing as the paste selection.
View 2 Replies View RelatedI just (re)installed Photoshop on my computer after a fresh install of Windows (damn that 2 year rule...) and now the color white on the screen comes out as a light yellow. When i save the files and view it in another program, or print it, it comes out as white, and the numbers (whatever they're called) are set to 255, 255, 255, yet it still comes out as a yellow.
View 8 Replies View RelatedI have just installed Elements 12. I went to open some jpeg images. They appear in the Photo Bin but can't be made to appear in the main window. The Layer Panel shows the background copy of the images.
View 3 Replies View RelatedI Keep having this reoccuring problem today - white lines keep appearing attatched to certain & all layers in photoshop files that I have, the only solution that seems to get rid of them is to put a mask on the layer and mask the line away, these are appearing on text, smart objects & rastersized layers.
They were not there when I previously saved the file and they should not be there now, I then went to open another file I had and white lines started to appear on the files. This is really frustrating because some of the website documents have alot of layers. I have attatched an example below, they only appear to be 1 pixel and can range up to 2500pixels wide and they overlap making the line look thicker sometimes.
I create my slide using illustrator (from CS2 to CS5) and when I save the file in pdf format, a red line is being created around the rectangle border of the silde.
I don't know how it was generated and what to do to remove it.
Got my max design 2012 but have a problem with horizontal banding appearing on certain bits of the image. see attachement.
Rendered the image fine in IRAY on max 2011 but now I moved to 2012 the same file creates these wierd lines.
Takes too long to clone it in Pshop and the results are not great.
It isn't running out of memory on the card.
AMD 1055, GTX 470, 8gig, win7
If I take an image, and using the path tool, draw an area, then do a selection from path, cut/copy and paste as 'new image' then save the new image as a .bmp, .jpg etc, I am getting the whole original image instead of the cut an pasted portion. The full image does not show up as long as the drawing remains in .xcf (the background is a grey checkerboard). When saved as .jpg or .bmp the checkerboard is replaced by the original source image that it was cut from. This is Gimp 2.6.11 under Linux.
I have checked for extra layers, tried removing alpha channels, doing a 'copy visible' and re-pasting, merging of all layers all to no avail. It doesn't always happen either so there must be something, some setting or clicky box somewhere.
I just got a fresh install of Illustrator CC and every time I place a raster image into my document, it appears dim or very light. When I go to export the image, the PNG file displays the image correctly.
View 6 Replies View RelatedIf I delete an image from my library it is not appearing in 'Trash'. I am pretty sure it used to, and this may be since the upgrade to LR4.1, but I am not sure. I am on an iMac with Lion.
View 1 Replies View RelatedI have an issue of a ghost image appearing in the composition background. I can't figure out how it got there or how to remove it. It's really annoyong as the image also appears in rendered videos.
This only seems to appear when my composition settings is set at 1024 x 576 px, which I must use for projects. If I increase the composition size by 1 pixel, the image disappears, change it back and it reappears.
note, that there is no files in my project and the image still appears.
while working on a new file, which only has our 4 standard textstyles, something happened at some point during the work period where multiple textstyles named "AUDIT_1_12030....." and counting up appeared. over 40 of them.
they are all somehow embedded within the each object in the file, even lines, which confuses me. Noweven if i wanted to just copy most of the project excluding blocks, dims, leaders and text, (which was my original assumption that the textstyles were in there somewhere), I cant. I usually am able to remove unwanted textstyles through the TXTMRG LISP/VBA macro. It has no effect this time.
I created a new mtext leader and it is set to one scale of 1/4" it shows fine in model space and paper space. Then when edit my drawings to try to add hatch or dim. there is a large text that appears in the background.
View 5 Replies View RelatedSo for some reason when I open maya and try to open a file or create reference the window doesn't pop up and I can't click anything else whenever I try I hear a ding sound. I've tried uninstalling and reinstalling.
View 2 Replies View RelatedThe entire image is what is blinking, while the photoshop tools remain on.
View 5 Replies View Relatedusing element 11 after opening a raw image the raw image editor will not open
View 3 Replies View RelatedWhen I try to plot the file from the layout the middle and right part of my xref'ed image comes out as a black box - the top, bottom and left edge are fine. As are the line-drawings from two other xref on top of the image. The problem accourse both when I try to a physical copy on our plotter and when I try to plot to a pdf.
I'm working in autoCAD 2013 for mac and the files I'm working on are located on a server.
when I am trying to use the lighting style scenes (such as old warehouse) I get this message "Cannot find the source Oldwarehouse of the image based lighting" and the background image does not appear I only get the same old gradient backgroud. (see attached file)
I know the IBL files exist and know where they are but I have moved the folders from the default location on my C: drive due to space reasons and changed the respective filepaths in the application options. However it seems inventor has not understood that the path to these IBL background files has changed... is there some filepath setting somewhere that I have missed?
I am using inventor 2013.
In LR 4, a small dark circle is appearing in the right upper corner of an image; hovering over it does not bring up an explanation and when tapping on it, it turns white?
View 7 Replies View RelatedI used to be able to just open any image and my copyright info would be inserted into the file data. I guess it was a droplet, "when the file is opened or created then add file info from a xmp file". I still have the xmp file with all the data in but i am unsure how to implement it being automatically opened and added to the file when i create a new one? I thought i could handle it, i assume its a droplet of some sort.
View 5 Replies View RelatedWhen trying to open a raw file in PSE 5 I receive the following error message
“Could not complete your request because the file format module cannot parse the file”
I checked and my camera Nikon D3100 is listed as a supported camera.