Lightroom :: Printed Image Is Too Large
Jun 12, 2013
I am using Lightroom 4.4 and an Epson 3880 with printer driver ver. 6.6. I want to print a 16 x 20 image on 17 x 22 paper. I select a paper size of 17 x 22, and in the Lightroom print module, I set the margins to zero, and the cell size to height=16 and width=20. I turn on the ruler guide, and it shows that I will get a 16x20 image on the paper. However, when I print it, the image is about 3/8" larger than that in both dimensions.
View 5 Replies
ADVERTISEMENT
Mar 16, 2012
Can the pictures file name be printed directly on to each image so that a preview book could be printed by Blurb with each photograph numbered.I can do this in slideshow but when I export the files for printing the numbers are gone.Several of my friend in the profession would also like the ability to apply the file names in this way.
View 1 Replies
View Related
Aug 17, 2012
Is it possible to either print or save an image that shows the crop lines from Lightroom (i.e. shows what is both in AND out of the image as it is cropped). I'm working off a scanned negative and I want to show my printer just how to crop the image. She was hoping to see both what's inside and outside the crop? Possible to get that to her either by printing that from my computer or emailing it to her?
View 1 Replies
View Related
Mar 24, 2012
most of my crops are set for custom. i want an 8x10 print. if i change the aspect ratio from custom to 4.5/8x10 it screws up my crop completely. that means that i cannot upload to an online website, be printed automatically and have it come out the way it want. but can that custom crop image be printed 8x10 manually?
View 2 Replies
View Related
Jan 13, 2014
All of a sudden the information to the image started appearing on top left of image. It is disturbing when I'm trying to edit image. How do I get rid of this image information on that part of the screen?
View 2 Replies
View Related
Jul 24, 2013
For example, I want to print one 17x22-inch image onto 2, 8.5x11-inch sheets.
View 2 Replies
View Related
Dec 10, 2011
I have a 2D image and I have the opportunity to get this image printed as a 3D model. To do this however, I of course need a VERY SIMPLE 3D model made. I attached the photo. How to make this for me really really simple? I have tried and tried, to no avail. The image is a logo for a non-profit organization that I head.
View 9 Replies
View Related
Sep 19, 2013
I have just started using photoshop to develop some designs that are meant to be printed on fabric. And then sewn into dresses..While I know how to change the size and scale of the image and canvas. I can not tell how big or small the objects or different elements in the pattern will be when printed out. For example if I want to have a certain part of the pattern appear on the shoulder of a dress and another on the hem, how do I ensure that they are printed at the right size and in the right place. I tried printing out one pattern on a meter of fabric and it turn out that it was too big and most of the design will be cut in the process of making the dress. I have no way to determine the dimensions. Is there a way where I can place a dress outline over an image to check it out or size the individual items inside?
View 1 Replies
View Related
Mar 28, 2012
I was scanning some old family photos and came across one that isn't an original photo but looks like it was printed on one of those little remembrance cards that are passed out at funerals and it is made up of little dots. The scanned image ends up with a kind of plaid pattern on it because of the dots:
I took a picture with my cell phone and it looks better.I have never tackled anything like this before and was wondering if there is a standard way of improving this kind of picture to look more like a photo.
View 13 Replies
View Related
Nov 28, 2011
Printed some rectangle that are 7.5 x 14.5 inches wide on the corel page on the monitor, but they did not actually print 7.5, they were about 1/4 inch smaller! the 14.5 dimension was fine. got to measuring other images I have printed and some are perfect, some are off.
View 1 Replies
View Related
Oct 10, 2008
For some reason with my Photoshop CS3, the image adjustments; i.e. contrast, brightness, etc. , are completely missing when the image is printed. The image file after saving looks fine on screen in a photo viewer, but when printed, the image reverts back to pre-edited state.
Things like cropping,color and transforming carry over , but the image adjustments don't . This is really strange, you would think that once an edited image was saved, all the changes to it are now permanent no matter what form it's displayed.
How is printing the image reversing the image adjustment editing to the file? Is there some kind of setting that it's in thats making it do this?
View 1 Replies
View Related
Feb 21, 2012
I am running PS CS5.5 on a a MAC running OSX 10.7.3 and printing to an Epson Stylus Photo 2200.
Background:
Basically, the dimensions of a printed graphic are different than the size that is specified in the PS version of the graphic. The amount of error is about 1/16 of an inch over a 6 inch distance. This matters as the printed output must fit a template exactly.
Details:
I create a 300 dpi resolution document. I am using inches as the ruler setting and the method for specifying the size of an object in the Free Transform Dialog. I create, with the rectangle tool, a rectangle and then use command-T to specify the dimensions to be 6 inches X 1 inch. I check using the ruler tool and verify that the shape is 6 X 1. When I print, the object is smaller. In fact, it will be 5 29/32 inches instead of 6 inches.
If I create the same object using Illustrator, the object prints (same printer) exactly the specified dimension. If I place the illustrator object into Photoshop it will "say" that it is 6 inches but prints at the reduced size.
After pulling my hair out, I have just adopted the work-a-round of scaling the output, in the printer dialog, by an appropriate % to compensate. There must be a better way to address this problem.
View 12 Replies
View Related
Sep 18, 2012
How do I reverse an image-it is printed backwards
View 4 Replies
View Related
Jul 12, 2013
Tried the same image printed using corel and Photoshop. same setup: let software handle color, color off in printer, same profiles and settings otherwise. the corel print is a bit darker and some colors are slightly different than the same image printed thru Photoshop.
I usually print designs created in corel as there is added text and graphic elements. Can't print those using PS. just odd there is noticeable color variations.
View 4 Replies
View Related
Oct 19, 2013
When printing in Orgnizer in Elements 11 the printout is as selected,but in Editor the image in Portrait format is always printed out smaller than selected e.g 15 x 10 cm image prints out as 10 x 9 cm. There is no 'Print Preview' facility available
View 5 Replies
View Related
Aug 7, 2013
I'm looking for a B&W I know I printed. It is in a collection with 3000+ images. I know the meta data shows when a file was printed. Is there a way I can filter images that were printed? I It would narrow down my search to maybe 100 images.
View 10 Replies
View Related
Aug 29, 2012
Is it possible to filter the photos that I have printed from Lightroom 4?
View 6 Replies
View Related
Aug 29, 2013
I've just upgraded to Lr5 and installed the 5.2RC. The watermark checked out was checked in export form but no watermark was printed on jpg.
View 14 Replies
View Related
Dec 18, 2013
So I couldn't think of a better place to put this. I have something that I'm thinking of having professionally printed. What are the steps I should take to make sure I produce a high quality image? File format, Dpi and so forth. Make a list of steps to creating a high quality image file that will look good printed from a print shop.
View 5 Replies
View Related
Feb 1, 2014
I'd like to create a smart collection of images that have been printed. Is there any way to do this? If not, is there a way to search for images that have been printed?
Separately, one my smart collections screens by edit date so that I can find out what I have worked on recently. However, it also picks up everything I shot and imported recently, even if I haven't edited the images. Is there any way to filter these out?
I'm using LR 5.3 for Windows.
View 5 Replies
View Related
May 22, 2012
I'm using LR 3.5, and am wondering if I can have the filenames show on the images when I export them. If so, how do I make that happen? I am already watermarking a copyright script, which I suppose I could change to include the image name, but that would be pretty tiresome to do. I assume there is an easy way to do this that I just haven't found.
View 7 Replies
View Related
Jan 6, 2012
I sometimes need to find recently printed images. Lightroom history in the develop module is great as it tells me when I last printed an image.
Is there a way to find all image printed on a given date? Or to sort by date printed?
View 3 Replies
View Related
Dec 21, 2013
I run MacOS 10.9, Lightroom 5.3 and I print on an Epson R3000.
The first problem I had was that the images was printed on just a small part of the paper and it cut the images. I have attached a picture showing this. I totally reinstalled my computer and now it looks like that problem is gone (for now at least). But now the images are printed but much smaller than the paper I specify. If I specify A3+ I get something close to A4. Borderless printing on 6*4 looks to be working as it should but that's the only I managed to print so far.
I tested printing from Photoshop 5.1 and that worked fine.
View 16 Replies
View Related
Oct 16, 2003
I have created a graphics file around 150 MB. When I try to open it in Photoshop, it gives an error message after trying to load...
"cannot open file because a disc error occured."
Some more info: I'm running on an iBook 2001 model (G3 processor, 600 Mhz, 384 MB RAM), the file is a psd (Photoshop) file.
I currently have around 2.85 GB left on my HD and I tried increasing the memory usage in prefs to around 300MB. I even tried using my HD as secondary scratch disc and purged cache in file browser. I figured this might free up some room. I also figure this might be a problem of space, so I tried backing up some files onto CD.
View 5 Replies
View Related
Oct 25, 2013
I am wondering about the text in my images. I am compiling images that end up 1000px across and will use them at 300dpi.
Is it better to put large text into the image whilst it's still large (2-3000px) and then resize down to 1000px or is it better to not subject the text to a resize by resizing the image first (down to the 1000px) and then pop the smaller text straight into the finished size image.
Which was will give sharper text (assuming a 2 point sharpen if resizing the text in a large image). I'll attach a sample image to show the kind of thing....
I learned to move over to PNG this week after reading that the JPG I had been using as 'standard' loses quality, looks like I was the last to find out.......
View 1 Replies
View Related
Apr 22, 2013
I have to photograph a huge wall with retangle objects mounted on it. The sizes and shapes of the objects vary. I need to create a very large image.
I will need to use photomerge. Am I better off shooting it in sections from one center perspective or shooting straight into each section and using photomerge.
View 1 Replies
View Related
Aug 18, 2013
I'm making a multiple monitor panorama and need to reverse the halves of the large image - 3840x1200 since my primary monitor is on the right.
So I can precisely select the parts I want since Select Rectangle has a precise mode in the tool options.But move has no precise mode.
Don't we need a precise mode in the Move tool too?
Not sure where to pass this along to the Gimpers, but it's the only thing I've found missing.
View 3 Replies
View Related
Dec 2, 2011
Is there any work around that will force AutoCad to spool when trying to print a large .tiff image? I am trying to print an image whose file size is 150mb to a plotter.
It doesn't spool at all, it instantly prints (leaving out the image). The image is on a layer set to print etc.
View 7 Replies
View Related
Jan 1, 2012
I have an image sized 20" x 24". I just have a standard 8.5" x 11" printer. Can I print the image in sections? If so, how?I did this with a PDF document once.
View 2 Replies
View Related
Aug 19, 2012
I have a Mac OS X Lion 10.7.4 and Photoshop CS5.1 and have just hooked up my Epson RX580. On the window platform in another software program the multiple pages and/or poster options appear in the print window. But not in Photoshop on my mac. I have made sure to download the newest drivers etc.
View 7 Replies
View Related
May 28, 2012
I have been asked to produce a large text based image to be printed on a gym floor with a size of approx. 2m squared. I am using a Collegiate style font and then rasterising the text to allow different coloured parts and blending the letters in to each other. I have produced the image in small scale, but now need to redo the image suitable for printing at such a large size. I know I will have to start again from scratch but am concerned that it may be pixelated at such a large size.
View 4 Replies
View Related
