Photoshop :: How Big Or Small Items In Image Will Be After Being Printed Out
Sep 19, 2013
I have just started using photoshop to develop some designs that are meant to be printed on fabric. And then sewn into dresses..While I know how to change the size and scale of the image and canvas. I can not tell how big or small the objects or different elements in the pattern will be when printed out. For example if I want to have a certain part of the pattern appear on the shoulder of a dress and another on the hem, how do I ensure that they are printed at the right size and in the right place. I tried printing out one pattern on a meter of fabric and it turn out that it was too big and most of the design will be cut in the process of making the dress. I have no way to determine the dimensions. Is there a way where I can place a dress outline over an image to check it out or size the individual items inside?
View 1 Replies
ADVERTISEMENT
May 26, 2013
I am printing to a Brother laser printer and a Kodak inkjet using logos in a size I have never used before. None of the content is postscript, none of it should have halftone, and none of it is bitmap-based. I have resized simple CDR and AI vector line art logos for clothing care from large size (about 4") down to 0.25" for a project I am working on. Uniform fill in black is used and some of the logos have outlines and some do not. When I print the tiny logos on the laser printer, even with a DPI or 600 or 1200, some (not all) of the lines have a noticeable saw tooth appearance under magnification, instead of smooth. Fonts that are around 5-point print with clean lines. When I print on the inkjet printer with the same DPI settings, the logos appear smooth under magnification. There may be a hint of a saw tooth, but it is barely noticeable. Font that are around 5-point print with clean lines. Perhaps I went beyond the capabilities of the laser printer, but I question that because the fonts print cleanly with much finer lines than in the logos. Note that I did notice a 45 degree halftone appearance in laser printed text with a uniform fill that was much larger than the logos, even though it is not postscript. This did not occur with the inkjet.
how I can make these logos have crisp solid lines in the tiny size I am using? I'm not printing separations. I haven't found any settings in CorelDraw X5 to fix this.
View 6 Replies
View Related
Dec 21, 2013
I run MacOS 10.9, Lightroom 5.3 and I print on an Epson R3000.
The first problem I had was that the images was printed on just a small part of the paper and it cut the images. I have attached a picture showing this. I totally reinstalled my computer and now it looks like that problem is gone (for now at least). But now the images are printed but much smaller than the paper I specify. If I specify A3+ I get something close to A4. Borderless printing on 6*4 looks to be working as it should but that's the only I managed to print so far.
I tested printing from Photoshop 5.1 and that worked fine.
View 16 Replies
View Related
Mar 28, 2012
I was scanning some old family photos and came across one that isn't an original photo but looks like it was printed on one of those little remembrance cards that are passed out at funerals and it is made up of little dots. The scanned image ends up with a kind of plaid pattern on it because of the dots:
I took a picture with my cell phone and it looks better.I have never tackled anything like this before and was wondering if there is a standard way of improving this kind of picture to look more like a photo.
View 13 Replies
View Related
Oct 10, 2008
For some reason with my Photoshop CS3, the image adjustments; i.e. contrast, brightness, etc. , are completely missing when the image is printed. The image file after saving looks fine on screen in a photo viewer, but when printed, the image reverts back to pre-edited state.
Things like cropping,color and transforming carry over , but the image adjustments don't . This is really strange, you would think that once an edited image was saved, all the changes to it are now permanent no matter what form it's displayed.
How is printing the image reversing the image adjustment editing to the file? Is there some kind of setting that it's in thats making it do this?
View 1 Replies
View Related
Feb 21, 2012
I am running PS CS5.5 on a a MAC running OSX 10.7.3 and printing to an Epson Stylus Photo 2200.
Background:
Basically, the dimensions of a printed graphic are different than the size that is specified in the PS version of the graphic. The amount of error is about 1/16 of an inch over a 6 inch distance. This matters as the printed output must fit a template exactly.
Details:
I create a 300 dpi resolution document. I am using inches as the ruler setting and the method for specifying the size of an object in the Free Transform Dialog. I create, with the rectangle tool, a rectangle and then use command-T to specify the dimensions to be 6 inches X 1 inch. I check using the ruler tool and verify that the shape is 6 X 1. When I print, the object is smaller. In fact, it will be 5 29/32 inches instead of 6 inches.
If I create the same object using Illustrator, the object prints (same printer) exactly the specified dimension. If I place the illustrator object into Photoshop it will "say" that it is 6 inches but prints at the reduced size.
After pulling my hair out, I have just adopted the work-a-round of scaling the output, in the printer dialog, by an appropriate % to compensate. There must be a better way to address this problem.
View 12 Replies
View Related
Sep 18, 2012
How do I reverse an image-it is printed backwards
View 4 Replies
View Related
Jul 12, 2013
Tried the same image printed using corel and Photoshop. same setup: let software handle color, color off in printer, same profiles and settings otherwise. the corel print is a bit darker and some colors are slightly different than the same image printed thru Photoshop.
I usually print designs created in corel as there is added text and graphic elements. Can't print those using PS. just odd there is noticeable color variations.
View 4 Replies
View Related
Oct 19, 2013
When printing in Orgnizer in Elements 11 the printout is as selected,but in Editor the image in Portrait format is always printed out smaller than selected e.g 15 x 10 cm image prints out as 10 x 9 cm. There is no 'Print Preview' facility available
View 5 Replies
View Related
Dec 10, 2011
I have a 2D image and I have the opportunity to get this image printed as a 3D model. To do this however, I of course need a VERY SIMPLE 3D model made. I attached the photo. How to make this for me really really simple? I have tried and tried, to no avail. The image is a logo for a non-profit organization that I head.
View 9 Replies
View Related
Jun 12, 2013
I am using Lightroom 4.4 and an Epson 3880 with printer driver ver. 6.6. I want to print a 16 x 20 image on 17 x 22 paper. I select a paper size of 17 x 22, and in the Lightroom print module, I set the margins to zero, and the cell size to height=16 and width=20. I turn on the ruler guide, and it shows that I will get a 16x20 image on the paper. However, when I print it, the image is about 3/8" larger than that in both dimensions.
View 5 Replies
View Related
Nov 28, 2011
Printed some rectangle that are 7.5 x 14.5 inches wide on the corel page on the monitor, but they did not actually print 7.5, they were about 1/4 inch smaller! the 14.5 dimension was fine. got to measuring other images I have printed and some are perfect, some are off.
View 1 Replies
View Related
May 25, 2012
How to I "unhide" my photo files in My Pictures?
View 5 Replies
View Related
Mar 16, 2012
Can the pictures file name be printed directly on to each image so that a preview book could be printed by Blurb with each photograph numbered.I can do this in slideshow but when I export the files for printing the numbers are gone.Several of my friend in the profession would also like the ability to apply the file names in this way.
View 1 Replies
View Related
Jan 1, 2006
I have a problem. I'm making a videogame with a videogame-making program, and I can import my videogame characters from computer images. One example is the Forest Imp monster:
PROBLEM is.. there's an invisible (because it's white) border of pixels around this monster. If you want to see it, go ahead and open the above png in Photoshop and use the Paint Bucket Tool to fill in the background, but make sure Anti-Aliased is OFF. See all the white pixels around the monster? Those show up in the videogame: ....
View 3 Replies
View Related
Aug 21, 2006
I have two extremely small images that I need to scale up. Unfortunately i can't post them but i need to know if anyone has any ideas on how to go about making them look more presentable.
View 1 Replies
View Related
Apr 24, 2003
These images are going to go on a mini slide of our products on our new website, but I can't seem to get the image focused....I would upload the image but Picturetrails is down. I swear this darn thing will be the death of me!! :confused: The image size is 52 pixels (height) and 26 pixels in width.
View 6 Replies
View Related
Aug 17, 2012
Is it possible to either print or save an image that shows the crop lines from Lightroom (i.e. shows what is both in AND out of the image as it is cropped). I'm working off a scanned negative and I want to show my printer just how to crop the image. She was hoping to see both what's inside and outside the crop? Possible to get that to her either by printing that from my computer or emailing it to her?
View 1 Replies
View Related
Mar 24, 2012
most of my crops are set for custom. i want an 8x10 print. if i change the aspect ratio from custom to 4.5/8x10 it screws up my crop completely. that means that i cannot upload to an online website, be printed automatically and have it come out the way it want. but can that custom crop image be printed 8x10 manually?
View 2 Replies
View Related
Aug 18, 2006
and when I resized it to the right one it pixelates. anyway to get rid of this?
View 1 Replies
View Related
May 13, 2008
how we make a 100X100 pixels image to 1000x800 pixel size image with out damging the clarity of image
View 3 Replies
View Related
Nov 25, 2004
I've been collecting all kinds of small cards and tickets. Like those that are clipped to a new set of jeans, or a ticket for a bus fair from vacation. Small pieces of paper that tell a story.
I'd like to make a poster, an image, out much smaller ones. I don't know how they are called, but everybody knows them. Those smaller images are put together in a checkerboard-pattern. Together they form a big image, that you one see when you take some distance, look between your eye lashes.
My question is: Is there a photoshop-filter that can do this, or is it a stand-alone application? Where can I get it?
I'm a MacOS X user.
View 5 Replies
View Related
Aug 12, 2013
CS6: why does a TIF image saved to Jpg format becomes so small?
tif = 292700 kB becomes Jpg = 936 kBJpg options: large file Quality 12, format option: Baseline standard.
View 10 Replies
View Related
Mar 26, 2013
I have a .jpg image (just a plain flat image, no layers) which mostly consists of text and one small image; I need to lift the text and the image from the background so I can change the background color, then put the text back again.
View 9 Replies
View Related
Sep 9, 2004
Whenever I try to use the Crop Tool, it only stretches out to a small portion of the image and refuses to stretch down any farther.
View 2 Replies
View Related
Nov 26, 2012
I am trying to sharpen a small portion of an image and folling the instructions given in the help files, I cannot locate the "Sharpen Tool" in the tool menu. How I can find this asset in Elements 10?
View 2 Replies
View Related
Dec 18, 2013
So I couldn't think of a better place to put this. I have something that I'm thinking of having professionally printed. What are the steps I should take to make sure I produce a high quality image? File format, Dpi and so forth. Make a list of steps to creating a high quality image file that will look good printed from a print shop.
View 5 Replies
View Related
Mar 31, 2012
I'm trying to make an image 879X593 px into a banner about 950 x 130 px. Is this possible to do this in Photoshop without causing the image to stretch or distort the items inside it? Are there other options even in Fireworks?
View 2 Replies
View Related
May 4, 2008
I am working on a project that is a large print of about 30 inches wide and 20 inches in height.
(I just wrote a big post but for some reason when I tried posting it the forum logged me off and it didnt post so I wont get too detailed here.)
Basically I need to print the image for example using 9 piece of normal paper and stick it together with transperant tape to make a large image.
Is there a way to do this without the need to cut the borders on each page, I really would like to print borderless pages and not cut them.
View 4 Replies
View Related
Mar 3, 2014
Using Elements vs 6 trying to resize some 2x4 photos sent in 72 resolution. I've tried using resize image, bilear, in small steps with no success.
View 2 Replies
View Related
Nov 28, 2012
I think it might be the GPU but i used apple computers with intel hd 4000 and it didnt do that. I have amd hd 7750 with an i5 and 4gb ram. Photoshop doesnt run slow its just the picture going in and out.
View 11 Replies
View Related
