I have a 2D image and I have the opportunity to get this image printed as a 3D model. To do this however, I of course need a VERY SIMPLE 3D model made. I attached the photo. How to make this for me really really simple? I have tried and tried, to no avail. The image is a logo for a non-profit organization that I head.
View 9 Replies
I created a quite simple model in the Autodesk Inventor Professional. Now, I'd like to know how prepare it to be printed (3D) by using the INVENTOR HSM EXPRESS. I need to show the process.
View 1 Replies View RelatedI have to get the printed paper model, and to assembly it within Inventor.
At the moment, I have the chassis, and next step should be a surface modelling.
But I`m not sure, which tool should I use. Chassis consist of some bulkheads, and there should be one patch between two neighbors. Patches are already printed:
So I have to bend them, according to bulkheads profiles.
Question is: how can I perform this step? I can`t realize, how to bend these patches, to stich two neighbor profiles. Is it possible for Inventor? Or should I use the authomatic surface fill, and texturing later?
Is it possible to have model space geometry print through a watermark in the layout? My watermark consists of mtext with an arial font placed manually in the layout. It is on it's own layer which is set to print at Shade 40 (plot style tables). Draworder works with other layout objects but not the geometry from the model space viewport. My watermark covers the model space geometry so it is not visible when printed. Is this possible?
View 1 Replies View RelatedI am using Lightroom 4.4 and an Epson 3880 with printer driver ver. 6.6. I want to print a 16 x 20 image on 17 x 22 paper. I select a paper size of 17 x 22, and in the Lightroom print module, I set the margins to zero, and the cell size to height=16 and width=20. I turn on the ruler guide, and it shows that I will get a 16x20 image on the paper. However, when I print it, the image is about 3/8" larger than that in both dimensions.
View 5 Replies View RelatedI have just started using photoshop to develop some designs that are meant to be printed on fabric. And then sewn into dresses..While I know how to change the size and scale of the image and canvas. I can not tell how big or small the objects or different elements in the pattern will be when printed out. For example if I want to have a certain part of the pattern appear on the shoulder of a dress and another on the hem, how do I ensure that they are printed at the right size and in the right place. I tried printing out one pattern on a meter of fabric and it turn out that it was too big and most of the design will be cut in the process of making the dress. I have no way to determine the dimensions. Is there a way where I can place a dress outline over an image to check it out or size the individual items inside?
View 1 Replies View RelatedI was scanning some old family photos and came across one that isn't an original photo but looks like it was printed on one of those little remembrance cards that are passed out at funerals and it is made up of little dots. The scanned image ends up with a kind of plaid pattern on it because of the dots:
I took a picture with my cell phone and it looks better.I have never tackled anything like this before and was wondering if there is a standard way of improving this kind of picture to look more like a photo.
Printed some rectangle that are 7.5 x 14.5 inches wide on the corel page on the monitor, but they did not actually print 7.5, they were about 1/4 inch smaller! the 14.5 dimension was fine. got to measuring other images I have printed and some are perfect, some are off.
View 1 Replies View RelatedFor some reason with my Photoshop CS3, the image adjustments; i.e. contrast, brightness, etc. , are completely missing when the image is printed. The image file after saving looks fine on screen in a photo viewer, but when printed, the image reverts back to pre-edited state.
Things like cropping,color and transforming carry over , but the image adjustments don't . This is really strange, you would think that once an edited image was saved, all the changes to it are now permanent no matter what form it's displayed.
How is printing the image reversing the image adjustment editing to the file? Is there some kind of setting that it's in thats making it do this?
I am running PS CS5.5 on a a MAC running OSX 10.7.3 and printing to an Epson Stylus Photo 2200.
Background:
Basically, the dimensions of a printed graphic are different than the size that is specified in the PS version of the graphic. The amount of error is about 1/16 of an inch over a 6 inch distance. This matters as the printed output must fit a template exactly.
Details:
I create a 300 dpi resolution document. I am using inches as the ruler setting and the method for specifying the size of an object in the Free Transform Dialog. I create, with the rectangle tool, a rectangle and then use command-T to specify the dimensions to be 6 inches X 1 inch. I check using the ruler tool and verify that the shape is 6 X 1. When I print, the object is smaller. In fact, it will be 5 29/32 inches instead of 6 inches.
If I create the same object using Illustrator, the object prints (same printer) exactly the specified dimension. If I place the illustrator object into Photoshop it will "say" that it is 6 inches but prints at the reduced size.
After pulling my hair out, I have just adopted the work-a-round of scaling the output, in the printer dialog, by an appropriate % to compensate. There must be a better way to address this problem.
How do I reverse an image-it is printed backwards
View 4 Replies View RelatedCan the pictures file name be printed directly on to each image so that a preview book could be printed by Blurb with each photograph numbered.I can do this in slideshow but when I export the files for printing the numbers are gone.Several of my friend in the profession would also like the ability to apply the file names in this way.
View 1 Replies View RelatedIs it possible to either print or save an image that shows the crop lines from Lightroom (i.e. shows what is both in AND out of the image as it is cropped). I'm working off a scanned negative and I want to show my printer just how to crop the image. She was hoping to see both what's inside and outside the crop? Possible to get that to her either by printing that from my computer or emailing it to her?
View 1 Replies View Relatedmost of my crops are set for custom. i want an 8x10 print. if i change the aspect ratio from custom to 4.5/8x10 it screws up my crop completely. that means that i cannot upload to an online website, be printed automatically and have it come out the way it want. but can that custom crop image be printed 8x10 manually?
View 2 Replies View RelatedTried the same image printed using corel and Photoshop. same setup: let software handle color, color off in printer, same profiles and settings otherwise. the corel print is a bit darker and some colors are slightly different than the same image printed thru Photoshop.
I usually print designs created in corel as there is added text and graphic elements. Can't print those using PS. just odd there is noticeable color variations.
When printing in Orgnizer in Elements 11 the printout is as selected,but in Editor the image in Portrait format is always printed out smaller than selected e.g 15 x 10 cm image prints out as 10 x 9 cm. There is no 'Print Preview' facility available
View 5 Replies View RelatedSo I couldn't think of a better place to put this. I have something that I'm thinking of having professionally printed. What are the steps I should take to make sure I produce a high quality image? File format, Dpi and so forth. Make a list of steps to creating a high quality image file that will look good printed from a print shop.
View 5 Replies View Relatedthe easiest way to create a vector image of a model in inventor? I also have other Autodesk tools at my disposai (Product Design Suite).
We have creating a catalogue of company parts, and they require nice clean crisp images for the brochure. They only seem to be able to create raster images.
I have an image (jpeg) showing in the model view as transparent 50.
However, when it is viewed in Layout view the image is not tranparent. The VP transparency is also set to 50 in layer properties.
how I can disable the preview image for model and layout tabs?This happens when I put the cursor over these tabs.
View 6 Replies View RelatedAm trying to convert this pump into solid ?
View 6 Replies View RelatedWhen I zoom in or zoom out the model, normally the dimension will follow the model too.But now in Autocad 2013, even the model size change, the dimension still remain unchange. why? Is there any setting I miss out? URL....
View 2 Replies View RelatedI just got back from maternity leave and I left work at Autocad 2011 and came back on Autocad 2013. I work thru my viewports in my model space, and I've noticed that when I pan and zoom in or out or move to quickly from one point to another (didn't notice which) my model space swaps to paper even if I'm in a command. Is this something I can deactivate?
View 3 Replies View RelatedI am having a problem with my scale when printed out. For Example
i set the scale of the layout to 1:1
The page set up manager is set to a4 210 * 297mm
The scale is set to 1mm = 1 unit
i draw a 100mm line and print it
when i measure the line 97.5mm on the paper.
It is always wrong when i use other scales 1:5 etc.
My problem today is that I made a Model of a Part of a ship using surfaces rather than solids because the engineer thought it would be easier to bring into ANSYS program for analysis but he is now having a problem with it and I am looking into converting my current model to solid. I can do it but the method I thought of using is quite long winded and we are working to a tight deadline.
1.open up the surface part
2.use "Offset/Thicken"
3.any clashes between parts make a sketch and cut away.
the problem is the amount of plates I have and the time it takes to sort them out.
I then change to my A0 template on a different tab in the same drawing, size up the model in model space within the viewport (everything still fine), then as soon as I scale the model to 1:200 the icons I've added to the drawing (I say icon it's one particular group of icons - CCTV camera icons I've made and added) suddenly become massive and three times the size.
If I add them when already at 1:200 they're fine but it only seems to do this when I actually scale the drawing.
I create a .net automation application to print to pdf with layers. There are more 30+ layers in the drawing, I like to have the layer information in the pdf file but like to merge them to a couple:
e.g.
PDF Layer 1 show AutoCAD Layer A1, A2, A3, ...,
PDF Layer 2 show AutoCAD Layer B1, B2, B3, ...,
PDF Layer 3 show AutoCAD Layer C1, C2, C3, ...,
...
I think there will be 3 solution here:
a) merge them at the time of AutoCAD printing
b) merge layer in pdf
c) create bookmark in pdf. I have used iTestSharp to generate PDF file, merge PDF files but cannot find a solution for this. How I can do it programmically?
I copy and pasted details from a survey drawing into my current model. A message came on screen that warned that any printed output would display the message PRODUCED BY AN AUTOCAD EDUCATIONAL PRODUCT.
I continued thinking that I would be able to purge any blocks later. I am not able to clean the drawing and any copies are printed with the message. I have tried WBLOCK and it still remains.
I am using an image for floor in a 3D model. In the render you can see the repeating pattern of uneven brightness from 1 side to the other. Is there a technique that will even out the brightness across the image left to right or up and down.
View 6 Replies View RelatedI'm having the same problem as the person in the below link but the solution they got in post #15 to place a spherical reflection map in the overide reflection slot doesn't make sense for me possibly because I have mental ray not vray. URL....
View 4 Replies View RelatedI have a .dxf model and I need the file in .ipt format as a 3d model. (I got the file from a website)
View 3 Replies View Related
